Skip to content
Independent United States Cost GuidesPrices verified November 2026 · 39 trades · 195 US cities · 221+ sources For pros →
Get a fair quote

Cost guides

Plumbing & water4 trades
Electrical & energy5 trades
Renovation8 trades
Structural7 trades
Outdoor & yard7 trades
Cleaning & maintenance8 trades

More

Get a fair quote
Cost guide

How much does concrete cost in Rochester?

By Our research team · Last verified · Methodology

Updated November 2026Independently researched11 min read
Concrete cost

Concrete costs in Rochester

Rochester, MNChange location
Get free quotesFree · no obligation · max 2 pros
Normal range for Rochester, MN
$2,450–$6,100per 400 sq ft

Most concrete contractors in Rochester charge $2,450–$6,100 to pour a 2-car driveway 400 sq ft, 4 in thick, plain finish, with $3,900 the typical bill. A plain slab runs $6–$12 a square foot; a 12 × 16 patio $1,200–$2,550.

How we get this data
Typical
$3,900
Low end
$1,700
High end
$9,450
2-car driveway
$2,450–$6,100
Plain slab, per sq ft
$6–$12
Stamped, per sq ft
$10–$19
Ready-mix, per cubic yard
$125–$200

Want an exact price for your job?

Tell us the job. Casey checks it by text, then up to 2 local concrete contractors send you a real quote. Free, no obligation.

Get my fair quote →
Typical concrete price: Rochester vs nearby citiesTypical price, per 400 sq ft. The line marks the US typical.
Rochester, MNThis guide $3,900
Madison, WI $3,900
Duluth, MN $3,800
Davenport, IA $3,800

The typical Rochester price is $3,900, in line with the US typical of $3,800.

Where Rochester sits among 195 US metrosNumber of metros at each typical concrete price, per 400 sq ft.

Rochester's price band

Rochester is pricier than 80% of the 195 US metros we price for concrete work.

Expect $2,450–$6,100 for a plain 400 sq ft concrete driveway in Rochester, with $3,900 the going rate. Smaller pours cost more per square foot: a 10 × 12 shed slab is $875–$1,750 and a set of steps $1,050–$3,250, while a 24 × 24 garage slab is $4,100–$8,750. Crews bill about $45–$105 an hour per worker when they work by the hour.

As a smaller market, Rochester prices a driveway in line with the US typical. Local pay drives it: concrete finishers in the Rochester, MN metro earn a median $68,550 a year (about 20% above the US median), while the 5.5 or so cubic yards of ready-mix in a 2-car driveway cost $690–$1,100 almost everywhere.

Minnesota requires a residential contractor license for contractors who earn more than $15,000 a year or work in two or more skill areas; concrete-only firms may be exempt. Cities permit right-of-way work. This is general information, not legal advice.

Comparing cities, or after the US-wide picture? See the national guide: Concrete cost in the USA.

Quick answer

$2,450–$6,100 to pour a 2-car concrete driveway in Rochester — 400 sq ft, 4 in thick, plain finish — typically $3,900. A plain slab runs $6–$12 a square foot, stamped concrete $10–$19, and a 12 × 16 patio $1,200–$2,550. Verified November 2026. Get free Rochester quotes →

  • 2-car driveway, 400 sq ft, 4 in: $2,450–$6,100 ($3,900 typical)
  • Plain slab $6–$12/sq ft; 6 in with rebar $8–$15; stamped $10–$19
  • Patio 12 × 16 $1,200–$2,550; garage slab 24 × 24 $4,100–$8,750; steps $1,050–$3,250
  • Remove old concrete $2–$7/sq ft; ready-mix $125–$200 per cubic yard
  • Pump truck $515–$1,450; sealing $365–$920; crew labor $45–$105/hr

Prices verified November 2026 · Cross-referenced against 20+ American pricing sources · See methodology

Detailed pricing — Concrete cost in Rochester 2026

Installed prices with labor, 3,000–4,000 psi concrete, gravel base and forms unless the row says otherwise. Rochester metro, re-verified November 2026. Removal, pumping, decorative finishes and sealing are their own rows.

ServiceLowTypicalHigh
Concrete driveway, 2-car, 20 × 20 ft (400 sq ft), 4 in, plain finish, installedper 400 sq ft$2,450per 400 sq ft$3,900$6,100
Plain concrete slab, 4 in, broom finish, installedper sq ft$6per sq ft$9$12
Concrete slab, 6 in with rebar (trucks, RVs, shops), installedper sq ft$8per sq ft$11$15
Rebar or wire-mesh reinforcement, added to a slab, per 100 sq ftper 100 sq ft$105per 100 sq ft$180$305
Colored concrete (integral color), installedper sq ft$8per sq ft$10$13
Exposed aggregate finish, installedper sq ft$8per sq ft$11$14
Stamped concrete, installedper sq ft$10per sq ft$14$19
Stain an existing slab (acid or water-based), sealedper sq ft$3per sq ft$6$10
Polish an existing concrete slabper sq ft$3per sq ft$6$10
New slab poured and polishedper sq ft$9per sq ft$15$22
Resurface or overlay existing concrete (spray-on or microtopping)per sq ft$3per sq ft$5$8
Stamped or exposed-aggregate driveway, 2-car, 400 sq ftper 400 sq ft$4,000per 400 sq ft$5,600$7,600
Concrete walkway, 4 × 50 ft (200 sq ft), 4 in, plainper walkway$1,250per walkway$1,850$2,650
Concrete patio, 12 × 16 ft (192 sq ft), plain broom finishper patio$1,200per patio$1,800$2,550
Shed or small slab, 10 × 12 ft (120 sq ft), 4 inper slab$875per slab$1,250$1,750
Garage slab, 24 × 24 ft (576 sq ft), 4–6 in with rebarper slab$4,100per slab$5,950$8,750
Poured concrete steps, 3–4 risers, 4 ft wideper set$1,050per set$1,850$3,250
Concrete footings, 12 × 24 in with rebar, per linear ftper linear ft$21per linear ft$35$50
Slab-on-grade foundation (monolithic, thickened edge), per sq ftper sq ft$6per sq ft$10$14
Remove and haul away old concrete, 4 in unreinforcedper sq ft$2per sq ft$4$7
Seal a 400 sq ft driveway or patio (pro, one coat)per job$365per job$620$920
Ready-mix concrete, 3,000–4,000 psi, deliveredper cubic yard$125per cubic yard$165$200
Concrete pump truck (line or boom), per jobper job$515per job$875$1,450
Concrete crew labor, per worker per hourper hour$45per hour$75$105
concrete jobs in Rochester: what they costPer sq ft, low to high with the typical price marked. Every line is in the table above.
New slab poured and polished $15$9–$22
Stamped concrete, installed $14$10–$19
Concrete slab, 6 in with rebar (trucks, RVs, shops), installed $11$8–$15
Exposed aggregate finish, installed $11$8–$14
Colored concrete (integral color), installed $10$8–$13
Slab-on-grade foundation (monolithic, thickened edge), per sq ft $10$6–$14
Plain concrete slab, 4 in, broom finish, installed $9$6–$12
Stain an existing slab (acid or water-based), sealed $6$3–$10
Polish an existing concrete slab $6$3–$10
Resurface or overlay existing concrete (spray-on or microtopping) $5$3–$8
Remove and haul away old concrete, 4 in unreinforced $4$2–$7
Already got a quote?
Check it against these Rochester prices — free, no sign-up.
$

Got it as a PDF or photo? Upload up to 3 quotes and compare →

Free quotes

Get free quotes from up to 2 local concrete contractors in Rochester

Free · No obligation · About a minute

  1. 1The job
  2. 2Budget
  3. 3Your details
Casey · LocalGoingRate

What do you need poured?

Tap one to start.

Prices verified November 2026 · Cross-referenced against 20+ American pricing sources · See methodology

Prices cover the Rochester metro. Outlying towns can pay delivery charges from the batch plant; tight lots in Downtown Rochester and Northwest & Northeast Rochester sit at the top of each range for pumping and demolition.

How concrete costs vary across Rochester

Concrete prices across Rochester

Where you live changes the access, not the concrete. Tight lots in Downtown Rochester need pumps and demolition; jobs in Byron, Stewartville & Winona price near the city typical, with bigger driveways and easier truck access.

Concrete prices across RochesterTypical range by part of the metro, per 400 sq ft. The line marks the Rochester typical.
Downtown Rochester8–15% above the city average $2,650–$7,000per 400 sq ft
Northwest & Northeast RochesterStandard to 6% above $2,500–$6,450per 400 sq ft
South & Southeast RochesterStandard pricing $2,450–$6,100per 400 sq ft
Byron, Stewartville & WinonaStandard; best truck access, bigger pours $2,400–$6,200per 400 sq ft

Downtown Rochester

8–15% above the city average
Downtown, Kutzky Park, Slatterly Park
2-car driveway
$2,650–$7,000 per 400 sq ft
Plain slab
$650–$1,400 / 100 sq ft of 4-in slab

The priciest part of the metro for flatwork: older slabs to break out and haul, little room to stage gravel and forms, and a pump or buggy needed to reach back yards. Small jobs here often pay a short-load fee on top.

Northwest & Northeast Rochester

Standard to 6% above
Northwest, Northeast, Elton Hills
2-car driveway
$2,500–$6,450 per 400 sq ft
Plain slab
$610–$1,250 / 100 sq ft of 4-in slab

Older homes being redone one project at a time. Patios and walkways are the common jobs; a driveway here usually means tearing out the old one first.

South & Southeast Rochester

Standard pricing
South Rochester, Mayo Run, Meadow Park
2-car driveway
$2,450–$6,100 per 400 sq ft
Plain slab
$600–$1,200 / 100 sq ft of 4-in slab

Established streets with a mix of house ages and driveway widths. Most jobs price at the city average; a truck can usually reach the pour, which keeps pumping costs off the bill.

Byron, Stewartville & Winona

Standard; best truck access, bigger pours
Byron, Stewartville, Kasson, Winona
2-car driveway
$2,400–$6,200 per 400 sq ft
Plain slab
$580–$1,200 / 100 sq ft of 4-in slab

Newer subdivisions with HOA rules on driveway widening and finishes. Easy access keeps labor down; check what the HOA allows before paying for a stamped or colored finish.

What you'll actually pay — job by job

Real-World Concrete Costs in Rochester

Here's what common concrete jobs cost in Rochester in 2026, labor, 4 in of 3,000–4,000 psi concrete, gravel base and forms included.

New 2-car driveway on a cleared lot — 2 to 3 days, 7 days before you park on it

$2,450–$3,900

Grade, 4 in of compacted gravel, forms, wire mesh, 5.5 yards of 4 in concrete, broom finish and control joints. Most Rochester driveways with truck access land here; a slope, a pump or 6 in with rebar pushes the bill toward $6,100.

Remove and replace a cracked 2-car driveway — 3 to 4 days

$3,250–$8,900

Breaking out and hauling 400 sq ft of old concrete runs $800–$2,800 (about 10 tons to the landfill at $90–$160 a ton), then the new pour at $2,450–$6,100. Reinforced old slabs cost more to cut up.

Stamped patio, 12 × 16 ft, one color and pattern — 1 to 2 days

$1,900–$3,650

The same patio in plain broom-finished concrete is $1,200–$2,550; stamping, color and sealer take it to $1,900–$3,650. Plan on resealing every 2–3 years at about $365–$920.

Garage slab, 24 × 24 ft, 4–6 in with rebar — 1 to 2 days

$4,100–$8,750

About 8 cubic yards of 4,000 psi concrete with a vapor barrier and a rebar grid, floated smooth. In Rochester that is $4,100–$8,750; a 6 in slab for a lift or a heavy truck prices at $8–$15 a square foot.

Shed slab or small parking pad, 10 × 12 ft — half a day

$875–$1,750

Small pours pay the most per square foot: $875–$1,750 for 120 sq ft works out to $7–$14 a square foot because the crew's setup and the ready-mix plant's short-load fee ($40–$110 a yard short) are spread over very little concrete.

How much does concrete cost in Rochester?

$2,450–$6,100, with $3,900 typical. A flat lot with a truck that can back right up to the forms sits at the low end; a sloped site, a pump truck, 6 in of concrete with rebar or a decorative finish lands near the top. Quotes above $6,100 for 400 sq ft usually mean the old driveway's removal ($800–$2,800) or a stamped finish is in the price.

If the old driveway has to come out first, add $800–$2,800 for breaking, hauling and disposal, which takes a remove-and-replace job to $3,250–$8,900. Figures re-checked against 20 sources in November 2026.

Concrete prices in Rochester (2026): driveways, slabs and finishes

A 2-car driveway costs $2,450–$6,100, a plain slab $6–$12 a square foot, and stamped concrete $10–$19 a square foot.

Line on the quoteLowTypicalHigh
2-car driveway, 400 sq ft, 4 in, plain$2,450$3,900$6,100
Plain slab, 4 in, per sq ft$6$9$12
Stamped concrete, per sq ft$10$14$19
Patio, 12 × 16 ft, plain$1,200$1,800$2,550
Garage slab, 24 × 24 ft$4,100$5,950$8,750
Steps, 3–4 risers$1,050$1,850$3,250
Remove old concrete, per sq ft$2$4$7
Ready-mix, per cubic yard delivered$125$165$200

Size cuts the rate. A 10 × 12 shed slab is $7–$14 a square foot in Rochester; a 24 × 24 garage slab is $7–$15. If you want a patio and a walkway too, pour them the same day as the driveway.

What moves a concrete quote in Rochester:

  • What is being poured — plain 4 in flatwork is $6–$12 a square foot; 6 in with rebar $8–$15; stamped $10–$19.
  • What is there now — removing old concrete runs $2–$7 a square foot, $800–$2,800 for a 2-car driveway, before any new work.
  • Truck access — a pump truck for a back yard or a tight lot adds $515–$1,450; small pours pay a short-load fee of $40–$110 a yard.
  • Base and site — a slope, soft soil or a first-time driveway means more excavation and gravel ($1–$3 a square foot for a 4 in base).
  • Season — pours below 40°F need blankets and heat, and pours above 90°F need retarders and early starts; both add time and cost.

Ask every Rochester contractor the same six things: slab thickness, the psi of the mix, the base depth, rebar or mesh, whether removal and disposal are included, and who cuts the control joints. Compare those, not the headline price. Get a quote for your concrete job →

Concrete Cost in Rochester by Project Size

Quick answer

Shed slab, 10 × 12 ft: $875–$1,750. Patio, 12 × 16 ft: $1,200–$2,550. 2-car driveway, 20 × 20 ft: $2,450–$6,100. Garage slab, 24 × 24 ft: $4,100–$8,750. 3-car driveway, 24 × 36 ft: $5,200–$10,350, all plain 4 in concrete.

Worked example: a Rochester 2-car driveway, 400 sq ft, is about $3,900. Add a 4 × 50 ft walkway to the front door at $1,850 and a 12 × 16 patio at $1,800, poured the same day, and the job is roughly $7,550 for about 792 sq ft, which is why one combined quote costs less than three separate ones: the truck, the crew and the setup come once.

The rate falls as the pour grows. A 10 × 12 shed slab is $7–$14 a square foot, a 2-car driveway $6.12–$15.25, and a 3-car driveway ($5,200–$10,350 for 864 sq ft) $6–$11. Thickness moves it the other way: going from 4 in to 6 in with rebar takes a square foot from $6–$12 to $8–$15.

Rochester Concrete Costs by Finish and Type

Finish or typeCostBest for
Plain concrete, broom finish$6–$12 per sq ftDriveways, garage floors, shed pads and plain patios. The cheapest finish and the easiest to repair.
Colored concrete (integral color)$8–$13 per sq ftPigment mixed into the whole load, so chips and wear show the same color. Earth tones cost least; blues and greens most.
Exposed aggregate$8–$14 per sq ftSlip-resistant pool decks, walkways and driveways. The top of the slab is washed off to show the stone.
Stamped concrete$10–$19 per sq ftPatios, pool decks and front walks that should look like stone, slate or brick. Needs resealing every 2–3 years.
Stained concrete (existing slab)$3–$10 per sq ftGiving a sound existing patio or floor color without a new pour. Acid stain is mottled; water-based stain is more even.
Polished concrete (existing slab)$3–$10 per sq ftGarage, basement and interior floors ground to a shine. Not for driveways — polished surfaces are slippery when wet.
New slab, poured and polished$9–$22 per sq ftA finished interior floor in one project: the slab plus the grinding and polishing passes.
Resurfacing overlay$3–$8 per sq ftA sound slab with surface flaws. A thin cement overlay hides spalling and stains for a fraction of a tear-out.
Heavy-duty 6 in slab with rebar$8–$15 per sq ftRV pads, truck parking, workshops and anywhere a trailer or lift will sit. Half again as strong as a 4 in slab.
Cost by finish or type in RochesterTypical range, per sq ft.
Plain concrete, broom finish $6–$12per sq ft
Colored concrete (integral color) $8–$13per sq ft
Exposed aggregate $8–$14per sq ft
Stamped concrete $10–$19per sq ft
Stained concrete (existing slab) $3–$10per sq ft
Polished concrete (existing slab) $3–$10per sq ft
New slab, poured and polished $9–$22per sq ft
Resurfacing overlay $3–$8per sq ft
Heavy-duty 6 in slab with rebar $8–$15per sq ft
Rochester tip: ask what psi the mix is. Exterior slabs should be at least 3,000 psi, and 3,500–4,000 psi with air entrainment where winters freeze. A cheaper 2,500 psi mix saves a few dollars a yard and spalls in a few winters.

Concrete price vs. what you pay — the Rochester driveway bill

Ready-mix concrete costs $125–$200 a cubic yard delivered in Rochester, and a cubic yard covers about 81 sq ft at 4 in, so a 400 sq ft driveway takes about 5.5 yards with waste and a thickened edge: $690–$1,100 of concrete inside a $2,450–$6,100 job. The difference pays for grading, a compacted gravel base, forms, steel, a crew of three or four for the pour, the finish, saw-cut joints and curing.

Labor is 40% to 55% of a flatwork bill, which is why prices differ by city while the concrete price barely moves. Where finishers earn more, a driveway costs more; the mix in the truck costs about the same in Rochester as it does two states away, give or take the plant's delivery radius.

What's included in a Rochester concrete quote (and what costs extra)

A standard driveway price covers grading, a compacted gravel base, forms, wire mesh or rebar, 4 in of concrete, a broom finish, control joints and curing. The headline price often leaves out:

  • Removing the old concrete — $2–$7 a square foot; $800–$2,800 for a 2-car driveway
  • Pump truck — $515–$1,450 when the mixer cannot reach the forms
  • Decorative finish — stamped $10–$19 and exposed aggregate $8–$14 a square foot, against $6–$12 plain
  • Sealing — $365–$920 for a 400 sq ft driveway, repeated every 2–3 years on decorative work

Ask for the thickness, psi, base depth and reinforcement in writing, and for proof of liability insurance.

What Affects Concrete Costs in Rochester

Size, thickness and reinforcement

Plain 4 in concrete is $6–$12 a square foot in Rochester; 6 in with rebar for trucks and RVs is $8–$15. Adding a rebar grid to a 4 in slab costs $105–$305 per 100 sq ft. Small pours cost more per square foot than big ones.

Finish

Broom finish is the base price. Integral color is $8–$13 a square foot, exposed aggregate $8–$14, stamped $10–$19. Stamped work also needs resealing every 2–3 years.

What has to come out first

Removing old concrete is $2–$7 a square foot, or $800–$2,800 for a 2-car driveway, including hauling and landfill fees. Reinforced or 6 in slabs cost more to break up.

Access and pumping

If the mixer truck cannot reach the forms, a line or boom pump adds $515–$1,450 to the job. Jobs under about 4 cubic yards pay a short-load fee of $40–$110 a yard at the plant.

Local rules

Minnesota requires a residential contractor license for contractors who earn more than $15,000 a year or work in two or more skill areas; concrete-only firms may be exempt. Cities permit right-of-way work.

Labor rates in Rochester

Cement masons and concrete finishers in the Rochester, MN metro earn a median $68,550 a year in federal wage data, about 20% above the US median. Labor is 40–55% of the bill, so Rochester prices land in line with the US typical of $3,800 for a 2-car driveway.

Season and weather

Concrete should not be poured on frozen ground or when the temperature will drop below 40°F in the next day without blankets and heaters, and hot days over 90°F need an early start and a retarder in the mix. In Rochester, the busy season books up weeks ahead, so get quotes early.

How to Save Money on Concrete in Rochester
  1. Pour everything in one visit.A driveway, walkway and patio poured the same day share one setup, one truck and no short-load fee. Separately, a 10 × 12 slab alone costs $875–$1,750 in Rochester — $7–$14 a square foot.
  2. Keep the truck close.A pour the mixer can reach from the street avoids a $515–$1,450 pump charge. Move cars, open gates and clear the path before the crew arrives.
  3. Choose the finish by where it shows.Stamp or color the front walk and the patio ($10–$19 a square foot) and leave the driveway and side yard in plain broom finish ($6–$12).
  4. Do the demolition and hauling yourself only if you can.Removal is $2–$7 a square foot, but 400 sq ft of 4 in concrete weighs about 10 tons and landfills charge $90–$160 a ton. A rented jackhammer and a dumpster often cost close to the contractor's price.
  5. Book the shoulder season.Late spring and early fall are the rush in Rochester. Contractors with gaps in late fall or late winter — where the climate allows a pour above 40°F — often sharpen their price.
  6. Get the spec in writing.Two quotes can differ by $1,450 on the same driveway because one is 3.5 in thick with no base and no steel. Make both say 4 in, the psi, the base depth and the reinforcement.
Concrete Cost in Rochester: What the Quote Should Include

Rochester contractors quote by the square foot or by the job. Before you pay a deposit, get these in writing:

  • The area in square feet with dimensions, and the slab thickness (4 in for cars, 5–6 in for trucks and RVs)
  • The concrete mix: psi (3,000 minimum outdoors; 3,500–4,000 with air entrainment where it freezes) and the number of cubic yards
  • Base: excavation depth, inches of compacted gravel, and a vapor barrier under any garage or interior slab
  • Reinforcement: wire mesh or rebar, bar size and spacing
  • Removal and disposal of existing concrete as its own line, with landfill fees
  • Finish (broom, stamped, exposed aggregate), color, sealer, and control joints — spacing and whether they are tooled or saw-cut
  • Truck access, pump charge or short-load fee, and any permit, sidewalk or curb-cut fees (and who pulls the permit)
  • Start date, pour date, cure time before you can park on it, payment stages, warranty and proof of insurance
Frequently asked questions — Concrete cost in Rochester
How much does a concrete driveway cost in Rochester?

$2,450–$6,100 for a 2-car, 20 × 20 ft driveway, 4 in thick with a plain finish, and $3,900 is typical. Removing the old driveway first adds $800–$2,800; a stamped finish takes it to $4,000–$7,600.

How much does concrete cost per square foot in Rochester?

$6–$12 a square foot for a plain 4 in slab, installed. Six inches with rebar is $8–$15, exposed aggregate $8–$14, and stamped concrete $10–$19. Small pours cost more per square foot than large ones.

How much is a cubic yard of concrete in Rochester?

$125–$200 a cubic yard for 3,000–4,000 psi ready-mix, delivered. Orders under a full truck pay a short-load fee of about $40–$110 a yard short, and a cubic yard covers about 81 sq ft at 4 in thick.

How much does a concrete patio cost in Rochester?

$1,200–$2,550 for a plain 12 × 16 ft patio. Stamped, the same patio is $1,900–$3,650; in exposed aggregate $1,550–$2,700.

How much does a concrete slab cost in Rochester?

$6–$12 a square foot for plain 4 in flatwork. A 10 × 12 shed slab is $875–$1,750, a 24 × 24 garage slab $4,100–$8,750, and a monolithic slab foundation $6–$14 a square foot.

How much does it cost to remove concrete in Rochester?

$2–$7 a square foot including hauling and landfill fees, so $800–$2,800 for a 400 sq ft driveway and $385–$1,350 for a 12 × 16 patio. Reinforced or thick slabs cost more.

Do I need a permit or a licensed contractor for concrete work in Minnesota?

Minnesota requires a residential contractor license for contractors who earn more than $15,000 a year or work in two or more skill areas; concrete-only firms may be exempt. Cities permit right-of-way work.

How thick should a concrete driveway be?

Four inches of 3,000–4,000 psi concrete over 4 in of compacted gravel is the standard for cars. Go to 5–6 in with rebar ($8–$15 a square foot) for trucks, RVs or a trailer. Thicker edges where the driveway meets the street help too.

How long before I can drive on new concrete?

Walk on it after 24–48 hours, park a car after 7–10 days, and keep heavy trucks and RVs off for 30 days. Concrete reaches its design strength at about 28 days; seal it after that.

What's included in a Rochester concrete quote?

Grading, gravel base, forms, mesh or rebar, the concrete, a broom finish, control joints and curing. Often extra: removal of old concrete ($800–$2,800 for a driveway), a pump truck ($515–$1,450), decorative finishes and sealing ($365–$920).

Prices verified November 2026 · Cross-referenced against 20+ American pricing sources · See methodology

Prices for the Rochester metro area, November 2026. Outer suburbs may vary.

Our methodology
These are independent estimates built from public cost guides, dated city price pages, ready-mix and material prices and federal wage data. No contractor can pay to change them, so always get two or three quotes. Last reviewed November 2026. Read our full methodology →

Get a fair concrete quote in Rochester

Local concrete contractors · Free quotes · No obligation, no spam.

Get quotes in Rochester →Max 2 concrete contractors will contact you
Get quotes in RochesterMax 2 concrete contractors · free · no spam→