Skip to content
Independent United States Cost GuidesPrices verified November 2026 · 39 trades · 195 US cities · 221+ sources For pros →
Get a fair quote

Cost guides

Plumbing & water4 trades
Electrical & energy5 trades
Renovation8 trades
Structural7 trades
Outdoor & yard7 trades
Cleaning & maintenance8 trades

More

Get a fair quote
Roof replacement cost / deep-diveVerified November 2026

How much does a metal roof cost?

By Our research team · Last verified · 12 jobs priced · Methodology

Roof replacement cost

Metal roof cost in the US

United States
Get free quotesFree · no obligation · max 2 pros
Normal range across the US
$18,000–$34,000installed

Standing-seam metal, 2,000 sq ft roof (20 squares). The full price list is below.

How we get this data
Typical
$25,000
Low
$18,000
High
$34,000
Jobs priced
12
Cities priced
195
Sources
221+
Verified
November 2026
Quick answer

$18,000–$34,000 for 2,000 sq ft of standing-seam metal roof installed in 2026, and $25,000 is typical — $900–$1,700 a square against $400–$850 for architectural shingles. Exposed-fastener corrugated panels are the budget metal roof at $500–$1,200 a square ($10,000–$24,000 for 2,000 sq ft); metal shingles run $600–$1,400, stone-coated steel $700–$1,300 and copper $1,300–$3,000. Competitive bids put the median metal re-roof at $34,250 over the past year because metal jobs skew to bigger roofs.

  • Standing seam $900–$1,700 a square installed; $18,000–$34,000 for a 2,000 sq ft roof ($25,000 typical)
  • Corrugated exposed-fastener $500–$1,200; metal shingles $600–$1,400; stone-coated steel $700–$1,300; copper $1,300–$3,000
  • Two to three times the price of architectural shingles ($400–$850), lasting 40–70 years against 25–30 years
  • Steel and aluminum tariffs went to 50% in June 2025; metal roofing costs rose up to 60% that spring
  • Resale: metal recoups 50.1% of its cost against 67.5% for asphalt (2025 Cost vs Value)

Prices verified November 2026 · Cross-referenced against 221+ American pricing sources · See methodology

01 / PricesUSA · November 2026

Metal roof prices (2026)

Installed, including tear-off of one shingle layer, underlayment, trim and flashing. Standing seam is $900–$1,700 a square.

Metal roof prices (2026)Per square, low to high with the typical price marked.
Copper roof, per square, installed $2,150$1,300–$3,000
Zinc roof, per square, installed $1,500$1,000–$2,000
Standing-seam metal roof, per square, installed $1,250$900–$1,700
Metal shingles, per square, installed $1,000$600–$1,400
Stone-coated steel, per square, installed $1,000$700–$1,300
Corrugated or exposed-fastener metal panels, per square, installed $750$500–$1,200
Architectural asphalt shingles, per square — for comparison $600$400–$850
JobLowTypicalHigh
Standing-seam metal, 2,000 sq ft roof (20 squares)installed$18,000$25,000$34,000
Standing-seam metal, 1,500 sq ft roofinstalled$13,500$18,750$25,500
Standing-seam metal, 3,000 sq ft roofinstalled$27,000$37,500$51,000
Corrugated exposed-fastener metal, 2,000 sq ft roofinstalled$10,000$15,000$24,000
Standing-seam metal roof, per square, installedper square$900$1,250$1,700
Corrugated or exposed-fastener metal panels, per square, installedper square$500$750$1,200
Metal shingles, per square, installedper square$600$1,000$1,400
Stone-coated steel, per square, installedper square$700$1,000$1,300
Zinc roof, per square, installedper square$1,000$1,500$2,000
Copper roof, per square, installedper square$1,300$2,150$3,000
Architectural asphalt shingles, per square — for comparisonper square$400$600$850
Metal roof repair (fastener, seam or panel)per job$200$400$600

US prices, November 2026. Low is a simple job in a low-cost area; high is a bigger job or a high-cost city.

02 / By city195 cities priced

Does metal roof cost change by city?

Yes. The same job costs more where labor and rent cost more. Here's how roof replacement prices in the biggest US metros compare with the US typical of $12000.

Roof replacement prices in the 12 biggest US metrosEach city's typical roof replacement price against the US typical of $12,000.
Los Angeles, CA 20% more
New York, NY 14% more
Chicago, IL 12% more
Washington, DC 12% more
Boston, MA 8% more
Miami, FL 2% more
Houston, TX 3% less
Atlanta, GA 3% less
Dallas, TX 4% less
Phoenix, AZ 6% less

Labor, rent and demand move every job on this page in the same direction. Open your city's guide for its full local price list.

03 / The guide4 parts

What to know before you book

Compare

Standing seam vs exposed-fastener: what the price buys

Standing-seam panels ($900–$1,700 a square) lock together at raised seams with the screws hidden underneath, so nothing penetrates the panel face; they expand and contract freely, shed snow and hail and last 40–70 years. Exposed-fastener corrugated or ribbed panels ($500–$1,200) are screwed straight through the face with gasketed screws — fast and cheap, right for barns, porches and simple gables, but the gaskets age and the screws want checking every ten years or so. Metal shingles ($600–$1,400) and stone-coated steel ($700–$1,300) sit between the two and look like shingles or tile from the street.

A 2,000 sq ft roof is $18,000–$34,000 in standing seam against $8,000–$17,000 in architectural shingles. National guides put the average metal roofing project at $11,769 (most $6,043–$18,345), which mixes in porches and small roofs; competitive bids on full metal re-roofs ran a median $34,250 (middle half $22,200–$52,450) over the past year, because the homes that choose metal tend to be large.

Why metal cost more in 2025–26: tariffs

Imported steel and aluminum carried a 25% Section 232 tariff from March 2025, raised to 50% on June 4, 2025; copper got its own 50% tariff on August 1, 2025, and hundreds of derivative products — fasteners, trim, equipment — were pulled in later. Roofing Contractor's analysis put the rise in metal roofing costs at as much as 60% between March and early June 2025, with panel prices tracking a hot-rolled coil price near $890 a short ton. The Supreme Court struck down a separate set of tariffs but left Section 232 in place, so the 2026 price list still carries it.

Asphalt shingles moved far less — roofing materials overall rose 1.48% in 2025 in Verisk's data — which widened the gap between a shingle roof and a metal one. If you want metal, get the panel gauge and coating named in the quote (24-gauge Galvalume with a Kynar or PVDF finish is the standard-seam benchmark) so that bids are comparing the same product.

Compare

Metal vs shingles over 50 years

A standing-seam roof at $25,000 lasting 50 years costs about $500 a year; an architectural roof at $12,000 replaced every 27 years costs about $445 a year plus a second tear-off. Metal also earns a Class 4 impact rating by default in most profiles (insurance credits in hail states), reflects summer heat with a cool-roof finish, and recoups 50.1% of its cost at resale against 67.5% for asphalt in the 2025 Cost vs Value report. Shingles win on first cost, on repair (one damaged panel is a bigger job than a few shingles), and on how many crews can install them well.

Noise, lightning, snow and the other questions

Over solid decking with underlayment a metal roof is no louder in rain than shingles; the tin-roof drumming comes from panels over open purlins. Metal does not attract lightning and, being non-combustible, is a Class A fire assembly. It sheds snow in sheets, so snow guards ($2,000–$3,000 on a Denver roof) go above doors and walkways. Dents from large hail are cosmetic on most profiles, and some insurers exclude cosmetic damage on metal in exchange for the Class 4 credit — read the endorsement.

04 / Check a quoteFree · no sign-up

Got a price? See if it's fair

Standing-seam metal, 2,000 sq ft roof (20 squares)
Type the price you were quoted. We compare it with the US range of $18,000–$34,000 installed.

A different job, or got it as a PDF or photo? Use the full quote checker →

Free quotes

Get free quotes from up to 2 local roofers

Free · No obligation · About a minute

  1. 1The job
  2. 2Budget
  3. 3Your details
Casey · LocalGoingRate

What kind of roofing job is it?

Tap one to start.

05 / Questions5 answers

Metal roof cost: FAQ

How much does a metal roof cost per square foot?

$9.00–$17.00 a square foot installed for standing seam ($900–$1,700 a square), $5.00–$12.00 for corrugated exposed-fastener panels, and $13.00–$30.00 for copper.

Is a metal roof cheaper than shingles in the long run?

Usually, if you stay 25 years or more: $25,000 over 50 years is about $500 a year, against $12,000 every 27 years ($445 a year) for architectural shingles plus a second tear-off. In the short run shingles cost two to three times less.

Can a metal roof go over existing shingles?

Over one layer, often yes — code allows a roof-over on one layer, never two, and the panels go on furring strips or a slip sheet. Most roofers still recommend tear-off so the decking can be inspected, and a roof-over voids some panel warranties.

Did tariffs raise metal roof prices?

Yes. The Section 232 tariff on imported steel and aluminum went to 50% on June 4, 2025 (copper on August 1, 2025), and metal roofing costs rose by as much as 60% in spring 2025. Asphalt shingles moved far less.

How long does a metal roof last?

40–70 years for standing seam with a Kynar/PVDF finish, 30–50 years for exposed-fastener panels (with the screws checked every decade), and a century or more for copper and zinc. Architectural shingles last 25–30 years.

Get roof replacement quotesMax 2 pros · free · no spam→