Roofers price by the square (100 sq ft of roof): $400–$850 per square for architectural shingles installed with tear-off in 2026, or $4.00–$8.50 per square foot. A 1,500 sq ft roof (15 squares) is $6,000–$12,750, 2,000 sq ft $8,000–$17,000 ($12,000 typical), 2,500 sq ft $10,000–$21,250 and 3,000 sq ft $12,000–$25,500. Roof area is bigger than floor area on a one-story home (about 2,469 sq ft of roof on a 2,000 sq ft ranch) and smaller on a two-story (about 1,273 sq ft), so the same house size can be 13 squares or 25.
Architectural shingles $400–$850 a square installed with tear-off — $4.00–$8.50 a square foot; 3-tab $300–$525, standing seam $900–$1,700
35 squares (3,500 sq ft of roof) — large two-story or sprawling ranchinstalled
$14,000
$21,000
$29,750
Replace roof, 2,500 sq ft steep or two-story roof (25 squares plus the steep-pitch add)installed
$11,000
$17,000
$24,250
Architectural asphalt shingles, per square, installed with tear-offper square
$400
$600
$850
3-tab asphalt shingles, per square (100 sq ft), installed with tear-offper square
$300
$400
$525
Standing-seam metal roof, per square, installedper square
$900
$1,250
$1,700
Tear-off and disposal of the old shingles, one layer, per squareper square
$100
$175
$300
Steep-pitch add (9:12 and up), whole roofper job
$1,000
$2,000
$3,000
US prices, November 2026. Low is a simple job in a low-cost area; high is a bigger job or a high-cost city.
02 / By city195 cities priced
Does cost per square and by home size change by city?
Yes. The same job costs more where labor and rent cost more. Here's how roof replacement prices in the biggest US metros compare with the US typical of $12000.
Roof replacement prices in the 12 biggest US metrosEach city's typical roof replacement price against the US typical of $12,000.
A roofing square is 100 sq ft of roof surface measured on the slopes, and every roofer's price list is written in it: $400–$850 a square for architectural shingles with tear-off, $300–$525 for 3-tab, $900–$1,700 for standing seam. The trap is the house size. A 2,000 sq ft one-story home with a 6:12 pitch and one-foot eaves carries about 2,469 sq ft of roof — nearly 25 squares — while a 2,000 sq ft two-story stacks the same floor area on half the footprint and carries about 1,273 sq ft, under 13 squares. One national guide's rule of thumb is roof area ≈ 1.12 × footprint for a one-story home at 6:12.
That is why cost guides disagree. HomeGuide prices a 2,000 sq ft house at $6,700–$13,400 ($5,000–$10,100 for 1,500 sq ft, $10,100–$20,100 for 3,000), This Old House puts the one-story version at $14,337 and the two-story at $7,392, and Angi's size table runs $6,800–$17,200 at 1,565 sq ft of roof to $13,600–$34,400 at 3,130. Ask for the measured squares and the per-square rate, and the quotes line up.
02
What two bids on the same roof look like
RoofMarketplace collects competitive bids on a standardized 20-square asphalt scope, permits and taxes included: the median over the past year was $13,250 and the middle half of bids ran $12,000–$14,650 — a $2,650 spread on identical work. By size the medians were $10,350 at 15 squares, $16,350 at 25 and $19,300 at 30, close to $662 a square across the board. Their sample scope — a 2,382 sq ft, 6:12 roof with two valleys — drew bids of $16,287–$16,721, with decking handled by change order at a stated per-sheet price.
So a spread of a few thousand dollars between two bids on the same roof is normal; a spread of $9,000 or more means the two roofers measured different squares, one left out the tear-off or the permit, or one priced felt and the other synthetic underlayment with ice-and-water shield ($40–$125 a square more). Line up the squares first.
03
What moves the per-square price
Pitch: a 9:12 or steeper roof adds $1,000–$3,000 for harnesses, roof jacks and slower work, which is why a 2,500 sq ft steep two-story is $11,000–$24,250 against $10,000–$21,250 for a plain ranch roof of the same size. Layers: tear-off of one layer ($100–$300 a square) is in the price; a second layer costs the same again, and two layers can never be roofed over. Complexity: hips, valleys, dormers, skylights and chimneys add flashing, cutting and waste. Access: a tight city lot that needs a street permit for the dumpster and hand-carried bundles prices above a driveway in the suburbs.
Then the market. Labor is roughly half of a shingle roof, so the same 20 squares cost most where roofers earn most: our city pages run from the cheapest metros to the dearest on the same scope, and the national price guides agree on the spread — Angi's average project is $9,611 with most homeowners paying $5,903–$13,380, HomeGuide's installed range is $300–$600 a square, and insurance-claim replacements averaged $17,631 in 2025 because claims skew to whole, storm-hit roofs.
04
How to measure your own roof
Measure the footprint from the ground (length × width, including overhangs), multiply by a pitch factor — 1.05 for 3:12, 1.12 for 6:12, 1.25 for 9:12, 1.42 for 12:12 — add 10% for waste on a simple gable or 15% on a cut-up roof, and divide by 100 for squares. A 40 × 50 ft footprint at 6:12 is 2,000 × 1.12 = 2,240 sq ft, plus 10% = about 25 squares — $10,000–$21,250 in architectural shingles. Satellite measurement reports do the same job for a fee, and most roofers now quote from one.
04 / Check a quoteFree · no sign-up
Got a price? See if it's fair
Architectural asphalt shingles, per square, installed with tear-off
Type the price you were quoted. We compare it with the US range of $400–$850 per square.
A ballpark is fine. It helps the roofers who reply.
C
Casey · LocalGoingRate
Where should they text you?
Max 2 roofers. No call floods.
100% free. No obligation.
🔒 Only your matched roofers see your number.
By continuing you agree to our Terms and Privacy Policy, and to texts from LocalGoingRate and up to 2 roofers about this request.Msg & data rates may apply · frequency varies · STOP to end · HELP for help
C
Casey · LocalGoingRate
Check your phone
05 / Questions5 answers
Cost per square and by home size: FAQ
What is a roofing square?
100 square feet of roof surface, measured on the slopes. Roofers price by it: $400–$850 a square for architectural shingles installed with tear-off, $300–$525 for 3-tab, $900–$1,700 for standing-seam metal.
How much does a roof cost per square foot?
$4.00–$8.50 a square foot for architectural shingles installed with tear-off, $3.00–$5.25 for 3-tab and $9.00–$17.00 for standing-seam metal. National guides put all roofs together at $4–$11 a square foot.
How many squares is a 2,000 sq ft house?
About 25 squares if it is one story (2,469 sq ft of roof with a 6:12 pitch and overhangs) and about 13 if it is two stories (1,273 sq ft). That is $10,000–$21,250 or $5,200–$11,050 in architectural shingles — ask for the measured squares, not the house size.
How much does a 3,000 sq ft roof cost?
$12,000–$25,500 for 30 squares of architectural shingles with tear-off, or $27,000–$51,000 in standing-seam metal. Competitive bids on 30-square asphalt jobs ran a median $19,300 over the past year.
Why are my two roofing quotes so different?
Usually the squares: one roofer measured 20 and the other 25, which is $2,000–$4,250 on its own. Then tear-off, the permit, felt versus synthetic underlayment ($40–$125 a square), and whether decking is a per-sheet line or a surprise. Competitive bids on identical 20-square scopes still spread $12,000–$14,650.
These are independent estimates built from public cost guides, competitive-bid data, insurer reports, retailer shelf prices, dated local roofer price pages, city permit schedules and federal wage data. No roofer can pay to change them, so always get two quotes from the same measured squares. Last reviewed November 2026. Read the full methodology →