Timber vs segmental block vs poured concrete retaining wall: cost per square foot
By Our research team · Last verified · Methodology
Timber
The cheapest wall to build and the shortest-lived: 10–40 years before rot sets in, less in wet ground.
Segmental block
The standard residential wall: dry-stacked on a gravel base, no mortar or footing. Lasts 50+ years; geogrid takes it past 4 ft.
Poured concrete
Tall walls, tight sites, driveways and anything holding a load. Needs forms, rebar and a footing below frost; can be faced with veneer.
Timber runs $15–$35 per sq ft, segmental block runs $20–$52 per sq ft and poured concrete runs $25–$60 per sq ft in the US (November 2026). For a 4 ft × 25 ft wall, timber is $3,150 typical, segmental block $4,200 and poured reinforced concrete $4,800. See prices for your city ↓
Prices verified November 2026 · Cross-referenced against 30+ American pricing sources · See methodology
Block, Timber, Concrete, Stone: Retaining Wall Costs by Material and Height
Block is $20–$52 a square foot installed, timber $15–$35, poured concrete $25–$60 and stone $30–$90. Per linear foot of block: $40–$104 at 2 ft, $80–$208 at 4 ft and $144–$374 at 6 ft with geogrid.
| Material or height | Cost | Best for |
|---|---|---|
| Segmental (interlocking) concrete block | $20–$52 per sq ft | The standard residential wall: dry-stacked on a gravel base, no mortar or footing. Lasts 50+ years; geogrid takes it past 4 ft. |
| Pressure-treated timber (6 × 6) | $15–$35 per sq ft | The cheapest wall to build and the shortest-lived: 10–40 years before rot sets in, less in wet ground. |
| Poured reinforced concrete | $25–$60 per sq ft | Tall walls, tight sites, driveways and anything holding a load. Needs forms, rebar and a footing below frost; can be faced with veneer. |
| Mortared concrete block (CMU) on a footing | $20–$45 per sq ft | Grouted, rebar-reinforced block on a poured footing, usually stuccoed or veneered. Common in California and the Southwest. |
| Natural stone | $30–$90 per sq ft | Looks, longevity (50–200 years) and the most skilled labor. Dry-stack fieldstone sits at the low end; cut, mortared stone at the top. |
| Boulder (rock) wall | $25–$50 per sq ft | Big landscape walls where a machine can set 1–3 ft rocks. Cheap per square foot where rock is local; needs room to work. |
| Gabion (wire baskets filled with rock) | $15–$40 per sq ft | Drains through itself, so no pipe behind it. Industrial look; good on creek banks and long low slopes. |
| Block wall, 2 ft high | $40–$104 per linear ft | Garden beds and grade changes under 2 ft: no permit almost anywhere, often a weekend DIY job. |
| Block wall, 4 ft high | $80–$208 per linear ft | The most common height. Right at the permit line in most cities (measured from the bottom of the base), so check before you dig. |
| Block wall, 6 ft high, geogrid-reinforced | $144–$374 per linear ft | Needs a permit, a stamped design and geogrid layers tied back into the soil. Many cities would rather see two 3 ft terraces. |
| Repair a failing wall | $250–$1,500 per job | Leaning blocks re-set, a drain added, cracks filled. Worth it when the base is sound; a bulge low down usually means a rebuild. |
| Tear out and rebuild | $30–$70 per sq ft | Walls that have moved more than a few inches, timber that has rotted through, or any wall with no drainage behind it. |
Material sets the per-square-foot price; height sets everything else. Under 4 ft (from the bottom of the base) a wall holding level ground is a landscaping job in most cities. Over it — or with a slope, driveway or building above — it is a permitted structure with a stamped design, geogrid or rebar, inspections and a price per linear foot that climbs faster than the wall does.
Timber vs Block vs Poured Concrete: What Each Costs and Why
For a 4 ft × 25 ft wall, timber is $3,150 typical, segmental block $4,200 and poured reinforced concrete $4,800. Same hole in the ground, three very different walls.
| Factor | Pressure-treated timber | Segmental block | Poured concrete |
|---|---|---|---|
| Typical price, 4 ft × 25 ft | $3,150 | $4,200 | $4,800 |
| Usual range | $1,900–$4,550 | $2,500–$6,500 | $3,000–$7,300 |
| Per square foot | $15–$35 | $20–$52 | $25–$60 |
| Lifespan | 10–40 years; rots at posts and base | 50–100 years | 50–100 years |
| Base and footing | Gravel base; posts set in concrete or deadmen tied back | 6 in. compacted gravel; no footing; geogrid over 3–4 ft | Footing below frost, $30–$100/ft, plus rebar $1–$5/sq ft |
| Max height before a design is normal | About 4 ft | About 4 ft (geogrid to 6 ft and beyond with a design) | Any height with a design; the choice for tall or loaded walls |
| Time on site | 1–2 days | 2–3 days | 3–5 days plus curing |
| Watch out for | No deadmen, untreated cut ends, creosote ties near gardens | Thin base, no drainage stone, no geogrid on a tall wall | No weep holes or waterproofing, footing above frost, no rebar |
Block is the default for a reason: $20–$52 a square foot, no footing, and it lasts. Timber is for budgets and short horizons; poured concrete for height, surcharges and tight sites. Whichever you pick, the drainage stone and pipe behind it ($10–$30 a linear foot) are not optional.
Timber vs block vs poured retaining wall: prices in the largest US cities
Local installed prices for each option, November 2026. Open a city for its full price list and a free quote.
| City | Timber | Segmental block | Poured concrete |
|---|---|---|---|
| New York, NY | $17–$37 per sq ft | $22–$56 per sq ft | $28–$64 per sq ft |
| Los Angeles, CA | $17–$38 per sq ft | $23–$57 per sq ft | $29–$65 per sq ft |
| Chicago, IL | $17–$37 per sq ft | $23–$56 per sq ft | $28–$65 per sq ft |
| Dallas, TX | $15–$33 per sq ft | $19–$49 per sq ft | $24–$57 per sq ft |
| Houston, TX | $15–$33 per sq ft | $19–$49 per sq ft | $24–$57 per sq ft |
| Washington, DC | $16–$36 per sq ft | $21–$53 per sq ft | $26–$62 per sq ft |
| Atlanta, GA | $15–$34 per sq ft | $19–$50 per sq ft | $24–$57 per sq ft |
| Philadelphia, PA | $15–$35 per sq ft | $20–$53 per sq ft | $25–$61 per sq ft |
| Miami, FL | $15–$35 per sq ft | $20–$52 per sq ft | $25–$60 per sq ft |
| Phoenix, AZ | $15–$35 per sq ft | $20–$52 per sq ft | $25–$60 per sq ft |
| Boston, MA | $17–$38 per sq ft | $23–$57 per sq ft | $29–$65 per sq ft |
| San Francisco, CA | $17–$37 per sq ft | $22–$56 per sq ft | $28–$64 per sq ft |
| Riverside, CA | $16–$37 per sq ft | $22–$55 per sq ft | $27–$63 per sq ft |
| Detroit, MI | $15–$35 per sq ft | $20–$53 per sq ft | $25–$61 per sq ft |
| Seattle, WA | $16–$37 per sq ft | $22–$55 per sq ft | $28–$64 per sq ft |
| Minneapolis, MN | $16–$37 per sq ft | $22–$55 per sq ft | $27–$63 per sq ft |
| San Diego, CA | $16–$37 per sq ft | $22–$55 per sq ft | $27–$63 per sq ft |
| Tampa, FL | $15–$34 per sq ft | $20–$51 per sq ft | $25–$59 per sq ft |
| Orange County, CA | $16–$37 per sq ft | $22–$55 per sq ft | $27–$63 per sq ft |
| Denver, CO | $15–$35 per sq ft | $20–$52 per sq ft | $25–$60 per sq ft |
| Oakland, CA | $16–$37 per sq ft | $22–$55 per sq ft | $27–$63 per sq ft |
| Charlotte, NC | $15–$34 per sq ft | $20–$51 per sq ft | $25–$59 per sq ft |
| Baltimore, MD | $15–$35 per sq ft | $20–$52 per sq ft | $25–$60 per sq ft |
| St. Louis, MO | $16–$36 per sq ft | $21–$54 per sq ft | $27–$63 per sq ft |
| Orlando, FL | $15–$34 per sq ft | $20–$51 per sq ft | $25–$59 per sq ft |
Get two real retaining wall quotes
Local licensed pros · free · max 2 will contact you · no spam.
- New York, NY →$2,800–$6,950 per wall
- Los Angeles, CA →$2,900–$7,100 per wall
- Chicago, IL →$2,800–$7,000 per wall
- Dallas, TX →$2,400–$6,150 per wall
- Houston, TX →$2,400–$6,150 per wall
- Washington, DC →$2,600–$6,700 per wall
- Atlanta, GA →$2,450–$6,200 per wall
- Philadelphia, PA →$2,550–$6,550 per wall
- Retaining wall cost: full US guide →