How much does a retaining wall cost in Lansing?
By Our research team · Last verified · Methodology
Most crews in Lansing charge $2,500–$6,450 for a 4 ft × 25 ft block wall installed, with $4,150 the typical bill. That is about $34 a square foot of wall face; the same wall in treated timber runs $1,900–$4,500.
How we get this data- Typical
- $4,150
- Low end
- $1,200
- High end
- $11,900
Want an exact price for your job?
Tell us the job. Casey checks it by text, then up to 2 local retaining wall contractors send you a real quote. Free, no obligation.
Get my fair quote →The typical Lansing price is $4,150, in line with the US typical of $4,200.
Lansing's price band
Lansing is pricier than 46% of the 195 US metros we price for retaining wall work.
Building a retaining wall in Lansing runs $2,500–$6,450 for the standard job — 4 ft high, 25 ft long, interlocking block on a gravel base — and most homeowners pay about $4,150. Repairs to a leaning or wet wall are $250–$1,500; tearing out a failed wall and rebuilding it is $30–$70 a square foot.
Lansing is a smaller market. A block wall here is in line with the US typical of $4,200, and most of the gap is labor: the block itself costs much the same from any yard, but a crew's day — digging the trench, compacting the base, setting and backfilling course by course — is priced on local pay.
Lansing is a smaller market. A block wall here is in line with the US typical of $4,200, and most of the gap is labor: the block itself costs much the same from any yard, but a crew's day — digging the trench, compacting the base, setting and backfilling course by course — is priced on local pay.
Comparing cities, or after the US-wide picture? See the national guide: Retaining wall cost in the USA.
$2,500–$6,450 to build a 4 ft × 25 ft segmental block retaining wall in Lansing — typically $4,150 or about $34 a square foot. Timber runs $1,900–$4,500 for the same wall, a 6 ft × 50 ft engineered wall $7,200–$18,700, and repairs $250–$1,500. Verified November 2026. Get free Lansing quotes →
- Block wall, 4 ft × 25 ft: $2,500–$6,450 ($4,150 typical)
- Per sq ft: timber $15–$35, block $20–$52, poured concrete $25–$60
- Per linear ft: $40–$104 at 2 ft, $80–$208 at 4 ft, $144–$374 at 6 ft
- Over 4 ft: permit $50–$450 + stamped design $400–$2,500
- Repairs $250–$1,500; tear out and rebuild $30–$70 per sq ft
Prices verified November 2026 · Cross-referenced against 30+ American pricing sources · See methodology
Installed prices with excavation, gravel base, drainage stone and pipe, backfill and cleanup unless the row says otherwise. Lansing metro, re-verified November 2026. Permits, stamped designs, caps, steps and old-wall removal are their own rows.
| Service | Low | Typical | High |
|---|---|---|---|
| Segmental block retaining wall, 4 ft high × 25 ft long (100 sq ft), installedper wall | $2,500per wall | $4,150 | $6,450 |
| Pressure-treated timber wall, 4 ft high × 25 ft long, installedper wall | $1,900per wall | $3,100 | $4,500 |
| Small garden wall, 2 ft high × 20 ft long, block (40 sq ft)per wall | $1,150per wall | $1,900 | $2,950 |
| Large wall, 6 ft high × 50 ft long, geogrid-reinforced block (300 sq ft), engineeredper wall | $7,200per wall | $12,250 | $18,700 |
| Segmental (interlocking) concrete block, per sq ft of wall face, installedper sq ft | $20per sq ft | $34 | $52 |
| Pressure-treated timber (6×6) wall, per sq ft, installedper sq ft | $15per sq ft | $25 | $35 |
| Poured reinforced concrete wall, per sq ft, installedper sq ft | $25per sq ft | $40 | $60 |
| Mortared concrete block (CMU) wall on a footing, per sq ft, installedper sq ft | $20per sq ft | $30 | $45 |
| Natural stone wall (dry-stack or mortared), per sq ft, installedper sq ft | $30per sq ft | $55 | $89 |
| Boulder (rock) wall, per sq ft, installedper sq ft | $25per sq ft | $38 | $50 |
| Gabion (wire basket and rock) wall, per sq ft, installedper sq ft | $15per sq ft | $28 | $40 |
| Block wall, 2 ft high, per linear ft, installedper linear ft | $40per linear ft | $68 | $104 |
| Block wall, 4 ft high, per linear ft, installedper linear ft | $80per linear ft | $136 | $208 |
| Block wall, 6 ft high with geogrid (engineered), per linear ft, installedper linear ft | $144per linear ft | $245 | $374 |
| Stamped design by a licensed structural or civil engineer (walls over 4 ft or holding a surcharge)per wall | $400per wall | $995 | $2,500 |
| Geotechnical (soils) report, where the city asks for oneper report | $800per report | $1,800 | $3,500 |
| Building permit for a retaining wall (where required)per permit | $50per permit | $200 | $450 |
| Drainage behind a new wall (perforated pipe, drainage stone, fabric), per linear ftper linear ft | $10per linear ft | $20 | $30 |
| Excavation and site prep, per cubic yard removedper cu yd | $50per cu yd | $124 | $223 |
| Cap blocks or coping on top of the wall, per linear ftper linear ft | $10per linear ft | $25 | $50 |
| Steps built into the wall (3-5 risers), blockper set | $400per set | $1,200 | $2,500 |
| Repair a failing section (re-set leaning blocks, fix drainage, cracks)per job | $250per job | $695 | $1,500 |
| Tear out and rebuild a failed wall, per sq ft (demolition, haul-away, new wall)per sq ft | $30per sq ft | $50 | $70 |
| Remove an old wall and haul it away, per sq ftper sq ft | $10per sq ft | $15 | $25 |
Got it as a PDF or photo? Upload up to 3 quotes and compare →
Get free quotes from up to 2 local retaining wall contractors in Lansing
Free · No obligation · About a minute
- 1The job
- 2Budget
- 3Your details
What kind of retaining wall do you need?
Tap one to start.
What's your rough budget?
A ballpark is fine. It helps the retaining wall contractors who reply.
Where should they text you?
- Max 2 retaining wall contractors. No call floods.
- 100% free. No obligation.
- 🔒 Only your matched retaining wall contractors see your number.
By continuing you agree to our Terms and Privacy Policy, and to texts from LocalGoingRate and up to 2 retaining wall contractors about this request.Msg & data rates may apply · frequency varies · STOP to end · HELP for help
Check your phone
Prices verified November 2026 · Cross-referenced against 30+ American pricing sources · See methodology
Figures are for the Lansing metro area. Trip and delivery charges apply on the far edges; the older lots of South & West Lansing often have a timber or railroad-tie wall to remove first.
Retaining wall prices across Lansing
Where you live changes the labor, not the block. Tight access in Downtown, Old Town & REO Town costs the most; walls in East Lansing & MSU tend to come in at or under the city typical.
Downtown, Old Town & REO Town
- 4 ft × 25 ft block wall
- $2,650–$7,200 per wall
- Block per sq ft
- $21–$58 / sq ft of block wall
The priciest part of the metro for any wall: access, parking and disposal are the extra lines. A small wall here can cost as much per square foot as a big one in the suburbs.
South & West Lansing
- 4 ft × 25 ft block wall
- $2,550–$6,750 per wall
- Block per sq ft
- $20–$55 / sq ft of block wall
A remodel-heavy area with older yards and old walls to take out first. Removal and disposal add to many jobs here, so ask for them as their own lines.
East Lansing & MSU
- 4 ft × 25 ft block wall
- $2,400–$6,300 per wall
- Block per sq ft
- $19–$51 / sq ft of block wall
Rental-heavy streets where small, plain walls dominate. Rates run at or just under the city average.
Okemos, Holt & Grand Ledge
- 4 ft × 25 ft block wall
- $2,500–$6,650 per wall
- Block per sq ft
- $20–$54 / sq ft of block wall
Bigger yards, bigger walls. Expect average per-square-foot pricing plus more square feet, and a trip charge for the far edges.
Real-World Retaining Wall Costs in Lansing
Here's what common retaining wall jobs cost in Lansing in 2026, excavation, gravel base, drainage stone and pipe, backfill and cleanup included.
Garden wall, 2 ft × 20 ft, block — one day
Forty square feet of interlocking block on a gravel base with drainage stone behind it. No permit in most of Lansing at this height, and the most common DIY wall. Priced by a crew it comes to $1,150–$2,950, about $1,900 typical.
Standard wall, 4 ft × 25 ft, block — 2 to 3 days
The job every other price on this page is built around: $4,150 typical. Right at the permit line in most cities (4 ft measured from the bottom of the base), so a wall that ends up 4 ft 2 in. tall can suddenly need a permit ($50–$450) and a stamped design ($400–$2,500) — about $5,345 all in.
Same wall with caps and full drainage priced as lines
A cap course ($625 for 25 ft) and the perforated pipe, drainage stone and fabric ($500 for 25 ft) bring the standard wall to about $5,275 in Lansing. If a quote is far below $2,500, check whether these are in it.
Tall wall, 6 ft × 50 ft, geogrid-reinforced block — 1 to 2 weeks
Three hundred square feet of face, geogrid every other course tied back into compacted fill, a deeper base, a permit and a design by a licensed structural or civil engineer. $7,200–$18,700 in Lansing, about $12,250 typical. Many building departments would rather approve two 3 ft terraces.
Replace a rotted timber wall with block, 4 ft × 25 ft
Tear-out and haul-away of the old timbers ($1,000–$2,500 for 100 sq ft) plus the new block wall ($4,150) comes to about $5,650 in Lansing. A rebuild priced as one line is $30–$70 a square foot.
How much does a retaining wall cost in Lansing?
Between $2,500 and $6,450 for the standard 4 ft × 25 ft block wall, and $4,150 is the price most Lansing homeowners pay. The block is the small part — $2–$10 a unit at the yard. The rest is a crew's two or three days: the trench, the compacted gravel base, drainage stone and pipe, and setting 100 square feet of block course by course.
If an old wall has to come out first, add $10–$25 a square foot for demolition and haul-away — $1,000–$2,500 for a 100 sq ft wall — or price the whole job as a rebuild at $30–$70 a square foot. Figures re-checked against 30 sources in November 2026.
Retaining wall prices in Lansing (2026): by height, material and job
The standard 4 ft × 25 ft block wall costs $2,500–$6,450; per linear foot a 4 ft block wall is $80–$208, and a stamped design for a taller wall $400–$2,500.
| Line on the quote | Low | Typical | High |
|---|---|---|---|
| Block wall, 4 ft × 25 ft (100 sq ft), installed | $2,500 | $4,150 | $6,450 |
| Timber wall, 4 ft × 25 ft, installed | $1,900 | $3,100 | $4,500 |
| Block wall, 2 ft high, per linear ft | $40 | $68 | $104 |
| Block wall, 4 ft high, per linear ft | $80 | $136 | $208 |
| Block wall, 6 ft high with geogrid, per linear ft | $144 | $245 | $374 |
| Stamped design, licensed structural or civil engineer | $400 | $995 | $2,500 |
| Building permit (where required) | $50 | $200 | $450 |
| Repair a failing section | $250 | $695 | $1,500 |
The 4 ft line matters in Lansing: a wall measured at 4 ft from the bottom of its base and holding only level ground usually needs no permit; add a few inches, a slope above it or a driveway behind it and the permit ($50–$450) and stamped design ($400–$2,500) come into the price.
What moves a retaining wall quote in Lansing:
- Height — per linear foot, 2 ft is $40–$104, 4 ft $80–$208 and 6 ft with geogrid $144–$374; past 4 ft add the permit and design.
- Material — timber $15–$35, block $20–$52, poured concrete $25–$60, stone $30–$89 per square foot.
- Access and slope — a wall a skid steer can reach prices normally; wheelbarrow access or a steep slope adds 50% or more to labor.
- What is behind the wall — a driveway, a slope or a patio above the wall is a surcharge; it needs a stronger design and usually a permit at any height.
- Old wall removal — $10–$25 a square foot to tear out and haul away what is there now.
Ask every Lansing contractor the same five things: the finished height and where it is measured from, the base depth and gravel, how much drainage stone and pipe go behind the wall, whether geogrid is in the price, and who pulls the permit. Compare those, not the headline price. Get a quote for your retaining wall job →
Retaining Wall Cost in Lansing by Size
Garden wall, 2 ft × 20 ft: $1,150–$2,950. Standard wall, 4 ft × 25 ft: $2,500–$6,450. Tall wall, 6 ft × 50 ft, geogrid-reinforced and engineered: $7,200–$18,700. Per linear foot: $40–$104 at 2 ft, $80–$208 at 4 ft, $144–$374 at 6 ft.
Worked example: a Lansing homeowner with a 25 ft grade change could build one 4 ft block wall for about $4,150, or two 2 ft terraces — 50 linear feet at $68 a foot, about $3,400 — with no permit, no stamped design and planting beds between them. The terraces cost less up front but skip the $1,195 of permit and design the 4 ft wall risks if it measures over the line.
Length is cheap, height is dear. Doubling the 4 ft wall to 50 ft roughly doubles the price to about $6,800; raising it to 6 ft instead takes 50 feet to $12,250 because of geogrid, the deeper base, the permit and the design — a 80% premium for the extra two feet.
Lansing Retaining Wall Costs by Material and Height
| Material or height | Cost | Best for |
|---|---|---|
| Segmental (interlocking) concrete block | $20–$52 per sq ft | The standard residential wall: dry-stacked on a gravel base, no mortar or footing. Lasts 50+ years; geogrid takes it past 4 ft. |
| Pressure-treated timber (6 × 6) | $15–$35 per sq ft | The cheapest wall to build and the shortest-lived: 10–40 years before rot sets in, less in wet ground. |
| Poured reinforced concrete | $25–$60 per sq ft | Tall walls, tight sites, driveways and anything holding a load. Needs forms, rebar and a footing below frost; can be faced with veneer. |
| Mortared concrete block (CMU) on a footing | $20–$45 per sq ft | Grouted, rebar-reinforced block on a poured footing, usually stuccoed or veneered. Common in California and the Southwest. |
| Natural stone | $30–$89 per sq ft | Looks, longevity (50–200 years) and the most skilled labor. Dry-stack fieldstone sits at the low end; cut, mortared stone at the top. |
| Boulder (rock) wall | $25–$50 per sq ft | Big landscape walls where a machine can set 1–3 ft rocks. Cheap per square foot where rock is local; needs room to work. |
| Gabion (wire baskets filled with rock) | $15–$40 per sq ft | Drains through itself, so no pipe behind it. Industrial look; good on creek banks and long low slopes. |
| Block wall, 2 ft high | $40–$104 per linear ft | Garden beds and grade changes under 2 ft: no permit almost anywhere, often a weekend DIY job. |
| Block wall, 4 ft high | $80–$208 per linear ft | The most common height. Right at the permit line in most cities (measured from the bottom of the base), so check before you dig. |
| Block wall, 6 ft high, geogrid-reinforced | $144–$374 per linear ft | Needs a permit, a stamped design and geogrid layers tied back into the soil. Many cities would rather see two 3 ft terraces. |
| Repair a failing wall | $250–$1,500 per job | Leaning blocks re-set, a drain added, cracks filled. Worth it when the base is sound; a bulge low down usually means a rebuild. |
| Tear out and rebuild | $30–$70 per sq ft | Walls that have moved more than a few inches, timber that has rotted through, or any wall with no drainage behind it. |
Per square foot vs the whole wall — the Lansing retaining wall bill
Block costs $20–$52 a square foot of wall face installed in Lansing, so 100 square feet should be $2,000–$5,200. The standard wall prices at $2,500–$6,450 because every job also carries fixed costs — a machine or a crew's hand-carry, a pallet delivery, spoil haul-away and cleanup — worth about $500–$1,250 on a wall this size. The smaller the wall, the bigger that share.
That is why a 2 ft × 20 ft garden wall ($1,150–$2,950) costs far more per square foot than a 6 ft × 50 ft wall ($7,200–$18,700), and why a quote for a short wall that looks high per square foot can still be fair. Compare whole-job prices for small walls and per-square-foot prices for long ones.
What's included in a Lansing retaining wall quote (and what costs extra)
A standard block-wall price covers excavation, a compacted gravel base, the block, drainage stone and a perforated pipe behind the wall, backfill, compaction and cleanup. The headline price often leaves out:
- Cap blocks or coping — $10–$50 a linear foot
- Permit and stamped design — $50–$450 and $400–$2,500 once the wall passes 4 ft or holds a surcharge
- Removing an old wall — $10–$25 a square foot, haul-away included
- Steps, lighting and a fence or railing on top — steps run $400–$2,500 a set; a fence on top changes the design
Ask for the base depth, drainage stone width, geogrid and permit responsibility in writing, and for proof of liability insurance.
Height, and where it is measured from
A 2 ft block wall is $40–$104 a linear foot in Lansing, a 4 ft wall $80–$208, and a 6 ft geogrid-reinforced wall $144–$374. Building departments measure from the bottom of the footing or base course, not the ground, so a wall with 6+ inches buried can cross the 4 ft permit line before it looks 4 ft tall.
Material
Timber $15–$35, gabion $15–$40, block $20–$52, boulder $25–$50, poured concrete $25–$60 and natural stone $30–$89 a square foot. Timber is cheapest and shortest-lived; stone the dearest and longest.
Drainage and base
A proper wall sits on at least 6 inches of compacted gravel with 12 inches of drainage stone and a perforated pipe behind it. Priced as lines, drainage is $10–$30 a linear foot and excavation $50–$223 a cubic yard; skipping either is how walls fail.
Permits, design and soil
Past 4 ft, or at any height with a slope or driveway above it, most cities want a permit ($50–$450) and a design stamped by a licensed structural or civil engineer ($400–$2,500); some ask for a geotechnical report ($800–$3,500).
Access and site
A flat yard a skid steer can reach is the low end. A side yard where block and gravel are wheelbarrowed in, a steep slope, roots, or an old wall to remove ($10–$25 a square foot) push the job toward $6,450 and beyond.
Labor rates in Lansing
Construction laborers in Michigan earn a median $49,590 a year in federal wage data, about 5% above the US median. Crews bill about $50–$100 an hour here, and labor is roughly 60% of a block-wall bill, so Lansing prices land in line with the US typical of $4,200.
Season
Spring and early summer are the rush, when quotes run higher and slots fill weeks ahead. Frozen ground stops base work in cold-winter metros; in hot ones crews prefer fall and winter. Late fall is often the cheapest time to book in Lansing.
- Stay under the permit line.A wall that measures under 4 ft from the bottom of its base, holding level ground, usually needs no permit or stamped design in Lansing — saving $50–$450 and $400–$2,500. Two short terraces often cost less than one tall wall.
- Pick block over poured concrete where it works.Segmental block is $20–$52 a square foot against $25–$60 for poured concrete in Lansing, needs no forms or footing, and lasts as long for walls under 6 ft.
- Do the demolition yourself.Tearing out an old timber wall and stacking it for pickup saves $10–$25 a square foot — $1,000–$2,500 on a 100 sq ft wall. Leave the digging to the crew; the base is where walls fail.
- Combine it with other hardscape.A crew already on site with a skid steer and a dump trailer can add a patio edge, steps or a second terrace for far less than a separate visit.
- Book the slow season.Spring is the rush in Lansing. Late fall, before the ground freezes, or winter in warm metros, is when crews have open weeks and sharper prices.
- Never cut the drainage.Drainage stone, pipe and fabric cost $250–$750 on a 25 ft wall; a wall built without them is the one you rebuild at $30–$70 a square foot.
Lansing contractors quote by the job, by the square foot or by the linear foot. Before you pay a deposit, get these in writing:
- Length and finished height, and where the height is measured from (bottom of base to top of wall)
- The material, on its own line — block brand and size, timber grade, concrete strength
- Excavation, spoil haul-away and backfill, with the gravel base depth stated
- Drainage: perforated pipe, drainage stone width and filter fabric, and where the pipe outlets
- Geogrid layers and spacing on any wall over 3–4 ft
- Who pulls the permit and pays for the stamped design, and whether a soils report is needed
- Old wall removal and disposal, included or listed
- Caps, steps, lighting and any fence or railing on top; warranty, dates and payment stages
How much does a retaining wall cost in Lansing?
$2,500–$6,450 for a 4 ft high, 25 ft long segmental block wall installed, and $4,150 is typical — about $34 a square foot of wall face. Timber is $1,900–$4,500 for the same wall; poured concrete about $3,000–$7,250.
How much is a retaining wall per linear foot in Lansing?
For block, $40–$104 at 2 ft high, $80–$208 at 4 ft and $144–$374 at 6 ft with geogrid. Timber runs lower, poured concrete and stone higher.
How much is a retaining wall per square foot in Lansing?
Timber $15–$35, gabion $15–$40, block $20–$52, boulder $25–$50, poured concrete $25–$60 and natural stone $30–$89 per square foot of wall face, installed.
Do I need a permit for a retaining wall in Lansing?
In most of Michigan, a retaining wall up to 4 ft tall measured from the bottom of the footing that holds back only level ground needs no building permit; taller walls, or any wall with a slope, driveway or structure above it, need a permit and usually a design stamped by a licensed structural or civil engineer. Check with the city before you dig.
How much does it cost to repair a retaining wall in Lansing?
$250–$1,500 for a typical repair — re-setting leaning blocks, adding a drain, filling cracks. Adding drainage to an existing wall runs $60–$70 a linear foot with excavation. A wall that has moved more than a few inches is usually rebuilt at $30–$70 a square foot.
What does it cost to replace an old timber wall with block in Lansing?
About $3,500–$8,950 for a 4 ft × 25 ft wall: $1,000–$2,500 to tear out and haul away the timbers plus $2,500–$6,450 for the new block wall.
Timber or block — which is cheaper?
Timber to build: $15–$35 a square foot against $20–$52 for block in Lansing. Block to own: it lasts 50+ years where treated timber gives 10–40 before rot, and a timber wall's second build costs more than block would have the first time.
What does a stamped design or a soils report cost?
A design by a licensed structural or civil engineer runs $400–$2,500 for a residential wall ($100–$220 an hour); a geotechnical report, where the city asks for one, $800–$3,500. Both are normal on walls over 4 ft or walls holding a slope or driveway.
How long does it take to build?
One day for a 2 ft garden wall, two to three days for the standard 4 ft × 25 ft block wall, and one to two weeks for a 6 ft × 50 ft reinforced wall including inspections. Add a few weeks up front if a permit and design are needed.
What's included in a Lansing retaining wall quote?
Excavation, a compacted gravel base, the block, drainage stone and pipe, backfill and cleanup. Often extra: caps ($10–$50 a foot), the permit ($50–$450), the stamped design ($400–$2,500), steps ($400–$2,500) and removing an old wall ($10–$25 a square foot).
Prices verified November 2026 · Cross-referenced against 30+ American pricing sources · See methodology
Prices for the Lansing metro area, November 2026. Outer suburbs may vary.
Get a fair retaining wall quote in Lansing
Local retaining wall contractors · Free quotes · No obligation, no spam.