Skip to content
Independent United States Cost GuidesPrices verified November 2026 · 39 trades · 195 US cities · 221+ sources For pros →
Get a fair quote

Cost guides

Plumbing & water4 trades
Electrical & energy5 trades
Renovation8 trades
Structural7 trades
Outdoor & yard7 trades
Cleaning & maintenance8 trades

More

Get a fair quote
Cost guide

How much does a deck cost in Greensboro?

By Our research team · Last verified · Methodology

Updated November 2026Independently researched13 min read
Deck cost

Deck costs in Greensboro

Greensboro, NCChange location
Get free quotesFree · no obligation · max 2 pros
Normal range for Greensboro, NC
$4,600–$10,300per deck

Most deck builders in Greensboro charge $4,600–$10,300 for a 12 × 16 pressure-treated deck about $36 a square foot, with $7,000 the going rate. Composite is $39–$76 a square foot here, and a new railing $24–$56 a linear foot in wood.

How we get this data
Typical
$7,000
Low end
$2,600
High end
$13,950
12 × 16 treated deck
$4,600–$10,300
12 × 16 composite deck
$8,250–$16,600
20 × 20 treated deck
$9,150–$19,650
Stairs, one flight
$480–$1,850

Want an exact price for your job?

Tell us the job. Casey checks it by text, then up to 2 local deck builders send you a real quote. Free, no obligation.

Get my fair quote →
Typical deck price: Greensboro vs nearby citiesTypical price, per deck. The line marks the US typical.
Raleigh, NC $7,200
Charlotte, NC $7,200
Durham, NC $7,150
Greensboro, NCThis guide $7,000
Roanoke, VA $6,900

The typical Greensboro price is $7,000, 7% below the US typical of $7,500.

Where Greensboro sits among 195 US metrosNumber of metros at each typical deck price, per deck.

Greensboro's price band

Greensboro is cheaper than 77% of the 195 US metros we price for deck work.

Building a 12 × 16 ft pressure-treated deck in Greensboro costs $4,600–$10,300, attached to the house with railing, and $7,000 is typical. In composite the same deck is $8,250–$16,600. Per square foot, treated wood runs $24–$51 and composite $39–$76; a 20 × 20 wood deck is $9,150–$19,650.

As a smaller market, Greensboro prices a 12 × 16 deck about 7% below the US typical. Local pay drives it: carpenters in the Greensboro-High Point, NC metro earn a median $49,910 a year (about 18% below the US median), while a treated 2 × 8 and a bag of concrete cost about the same everywhere.

North Carolina requires a general contractor license only from $40,000 a project, so most deck builders need none; check insurance, and the county or city issues the permit. This is general information, not legal advice.

Comparing cities, or after the US-wide picture? See the national guide: Deck cost in the USA.

Quick answer

$4,600–$10,300 to build a 12 × 16 ft pressure-treated deck in Greensboro — attached, with railing, installed — typically $7,000. Composite takes the same deck to $8,250–$16,600; a 20 × 20 wood deck is $9,150–$19,650. Verified November 2026. Get free Greensboro quotes →

  • 12 × 16 pressure-treated deck with railing: $4,600–$10,300 ($7,000 typical)
  • Composite 12 × 16: $8,250–$16,600; per sq ft wood $24–$51, composite $39–$76
  • 16 × 20 wood deck $7,200–$16,350; 20 × 20 $9,150–$19,650
  • Stairs $480–$1,850 a flight; wood railing $24–$56 a linear ft; permit $98–$770
  • Tear out an old 12 × 16: $565–$2,250; clean and stain: $330–$895

Prices verified November 2026 · Cross-referenced against 18+ American pricing sources · See methodology

Detailed pricing — Deck cost in Greensboro 2026

Installed prices with labor, materials and hardware unless the row says otherwise; whole-deck rows include a basic railing. Greensboro metro, re-verified November 2026. Stairs, permit, tear-out and railing upgrades are their own rows.

ServiceLowTypicalHigh
Build a 12 × 16 ft (192 sq ft) pressure-treated wood deck, attached, with railingper deck$4,600per deck$7,000$10,300
Build a 12 × 16 ft composite deck (Trex or TimberTech class) with composite railingper deck$8,250per deck$11,850$16,600
Build a 16 × 20 ft (320 sq ft) pressure-treated deck with railingper deck$7,200per deck$10,750$16,350
Build a 20 × 20 ft (400 sq ft) pressure-treated deck with railingper deck$9,150per deck$13,550$19,650
Pressure-treated wood deck, per square foot (framing, decking, basic railing)per sq ft$24per sq ft$36$51
Cedar or redwood deck, per square footper sq ft$29per sq ft$40$57
Ipe or other tropical hardwood deck, per square footper sq ft$39per sq ft$55$76
Composite deck (Trex, TimberTech, Fiberon), per square footper sq ft$39per sq ft$55$76
PVC deck (AZEK / TimberTech Advanced PVC), per square footper sq ft$44per sq ft$62$86
Elevated or second-story deck, added cost per square footper sq ft$8per sq ft$14$28
Pressure-treated wood railing, per linear footper linear ft$24per linear ft$37$56
Composite railing (Trex, TimberTech), per linear footper linear ft$58per linear ft$91$160
Aluminum railing, per linear footper linear ft$44per linear ft$72$115
Cable railing, per linear footper linear ft$98per linear ft$145$215
Deck stairs, one flight of 4–6 steps with handrailper flight$480per flight$930$1,850
Concrete footing, dug and poured, with post baseper footing$145per footing$255$370
Building permit, plan review and inspectionsper permit$98per permit$335$770
Tear out and haul away an old 12 × 16 deckper deck$565per deck$1,150$2,250
Deck repair: replace boards, re-fasten railing, small jobper job$285per job$820$2,250
Clean and stain or seal a 12 × 16 deck, no sandingper deck$330per deck$540$895
Sand and refinish a 12 × 16 deck (strip, sand, stain)per deck$565per deck$985$1,600
Pergola over a deck, 12 × 12 to 12 × 16, installedper pergola$2,400per pergola$5,200$9,400
Roof over a 12 × 16 deck (covered deck, shingled, open sides)per deck$3,850per deck$7,500$13,100
Deck inspection (safety or pre-sale)per inspection$115per inspection$225$405
Bigger deck jobs in Greensboro: what they costPer deck, low to high with the typical price marked. Every line is in the table above.
Build a 20 × 20 ft (400 sq ft) pressure-treated deck with railing $13,550$9,150–$19.6K
Build a 12 × 16 ft composite deck (Trex or TimberTech class) with composite railing $11,850$8,250–$16.6K
Build a 16 × 20 ft (320 sq ft) pressure-treated deck with railing $10,750$7,200–$16.4K
Roof over a 12 × 16 deck (covered deck, shingled, open sides) $7,500$3,850–$13.1K
Build a 12 × 16 ft (192 sq ft) pressure-treated wood deck, attached, with railing $7,000$4,600–$10.3K
Smaller deck jobs and repairs in GreensboroPer deck, low to high with the typical price marked. Every line is in the table above.
Tear out and haul away an old 12 × 16 deck $1,150$565–$2,250
Sand and refinish a 12 × 16 deck (strip, sand, stain) $985$565–$1,600
Clean and stain or seal a 12 × 16 deck, no sanding $540$330–$895
Already got a quote?
Check it against these Greensboro prices — free, no sign-up.
$

Got it as a PDF or photo? Upload up to 3 quotes and compare →

Free quotes

Get free quotes from up to 2 local deck builders in Greensboro

Free · No obligation · About a minute

  1. 1The job
  2. 2Budget
  3. 3Your details
Casey · LocalGoingRate

What kind of deck job is it?

Tap one to start.

Prices verified November 2026 · Cross-referenced against 18+ American pricing sources · See methodology

Figures are for the Greensboro metro area. Trip charges can apply on the far edges; small, hard-to-reach yards in Downtown & Fisher Park cost the most per square foot.

How deck costs vary across Greensboro

Deck prices across Greensboro

Where you live changes the labor and the access, not the lumber. Tight lots in Downtown & Fisher Park take the longest; decks in East Greensboro & NC A&T tend to come in at or under the city typical.

Deck prices across GreensboroTypical range by part of the metro, per deck. The line marks the Greensboro typical.
Downtown & Fisher Park6–12% above the city average $4,900–$11.6Kper deck
East Greensboro & NC A&T2–4% below $4,400–$10.1Kper deck
High PointStandard pricing $4,600–$10.3Kper deck
Winston-Salem corridor & the suburbsStandard; bigger decks, HOA review $4,600–$10.8Kper deck

Downtown & Fisher Park

6–12% above the city average
Downtown, Fisher Park, Southside
12 × 16 treated deck
$4,900–$11,550 per deck
Composite deck
$8,750–$18,600 / 12 × 16 composite deck

Dense blocks and small yards, so most decks here are small, elevated off a kitchen door, or rebuilt on an existing footprint. Setup time, not square footage, pushes the price up.

East Greensboro & NC A&T

2–4% below
East Greensboro, NC A&T, Glenwood
12 × 16 treated deck
$4,400–$10,100 per deck
Composite deck
$7,900–$16,250 / 12 × 16 composite deck

Older housing near campus, much of it rented. Expect more repair and re-stain work than new decks, at slightly lower rates.

High Point

Standard pricing
High Point, Jamestown
12 × 16 treated deck
$4,600–$10,300 per deck
Composite deck
$8,250–$16,600 / 12 × 16 composite deck

Settled neighborhoods with room to stage lumber and a dumpster. Expect average rates and plenty of straightforward attached decks.

Winston-Salem corridor & the suburbs

Standard; bigger decks, HOA review
Kernersville, Burlington, Summerfield
12 × 16 treated deck
$4,600–$10,800 per deck
Composite deck
$8,250–$17,450 / 12 × 16 composite deck

Mostly single-family homes with bigger yards, so decks here run large: 16 × 20 and 20 × 20 are common, and two-story walkouts need taller posts and more footing work. Many subdivisions need HOA approval before the permit.

What you'll actually pay — job by job

Real-World Deck Costs in Greensboro

Here's what common deck jobs cost in Greensboro in 2026, footings, frame, decking, basic railing and hardware included.

12 × 16 pressure-treated deck, one step off the ground — 3 to 5 days

$4,600–$7,000

Six footings, a treated frame bolted to the house, 192 sq ft of 5/4 boards and a wood railing. Most Greensboro decks on a one-story house land here; a dark stain, picture-frame border or a short stair run pushes the bill toward $10,300.

Same deck in composite with composite railing

$8,250–$16,600

The frame is still treated lumber; the boards and rails are composite. About $4,850 more than wood on a 12 × 16 in Greensboro, and the saving is the stain job you never pay for: $330–$895 every two or three years on wood.

Replace a rotted 12 × 16 deck, like for like — 4 to 6 days

$5,165–$12,550

Tear-out and disposal ($565–$2,250) plus the new deck ($7,000 typical). Builders often find the ledger board or the rim joist rotted behind the old deck; budget for new flashing and a few feet of siding repair.

Walkout deck a story up, 12 × 16, with stairs — 1 to 2 weeks

$6,630–$17,550

Taller 6 × 6 posts, a bigger beam, 6 deeper footings and a flight of stairs ($480–$1,850). Elevated work adds $8–$28 a square foot in Greensboro, and the city will want to see the ledger bolts and the guard height at inspection.

20 × 20 pressure-treated deck for a big backyard — 1 to 2 weeks

$9,150–$19,650

Twice the boards of a 12 × 16 but not twice the price: $13,550 typical against $7,000. The permit ($98–$770) is the same, and 9 footings instead of 6. Composite at this size runs $15,600–$30,400.

How much does a deck cost in Greensboro?

A 12 × 16 pressure-treated deck in Greensboro costs $4,600 to $10,300. The middle of the market, about $7,000, buys 6 poured footings, a 2 × 8 treated frame with joist hangers, 5/4 deck boards, a 36-inch wood railing and a permit pulled by the builder. Composite boards ($39–$76 a square foot) and stairs ($480–$1,850) are the common upgrades.

Bigger decks cost less per square foot. A 16 × 20 treated deck is $7,200–$16,350 and a 20 × 20 $9,150–$19,650, against $4,600–$10,300 for 12 × 16. In composite, a 12 × 16 runs $8,250–$16,600. Prices re-checked against 18 sources in November 2026.

Deck prices in Greensboro (2026): by size, material and extras

A 12 × 16 pressure-treated deck costs $4,600–$10,300, the same deck in composite $8,250–$16,600, and a 20 × 20 wood deck $9,150–$19,650.

Line on the quoteLowTypicalHigh
12 × 16 pressure-treated deck with railing$4,600$7,000$10,300
12 × 16 composite deck with composite railing$8,250$11,850$16,600
20 × 20 pressure-treated deck with railing$9,150$13,550$19,650
Composite decking, per sq ft installed$39$55$76
Deck stairs, one flight with handrail$480$930$1,850
Building permit$98$335$770
Tear out and haul away a 12 × 16 deck$565$1,150$2,250
Clean and stain a 12 × 16 deck$330$540$895

Wood or composite in Greensboro: the composite deck costs about $4,850 more up front on a 12 × 16, and a wood deck needs $330–$895 of cleaning and staining every two or three years. Over 25 years that is roughly $4,500 of upkeep, which is why many Greensboro builders now sell more composite than wood.

What moves a deck quote in Greensboro:

  • Boards — treated wood is $24–$51 a square foot installed; cedar $29–$57; composite $39–$76; PVC $44–$86. The frame underneath is treated lumber either way.
  • Height — a deck more than 30 inches off the ground needs a 36-inch railing; a walkout a story up adds $8–$28 a square foot for posts, beams and stairs.
  • Railing — about 40 linear ft on a 12 × 16: $960–$2,250 in wood, $1,750–$4,600 in aluminum, $2,300–$6,400 in composite, $3,900–$8,600 in cable.
  • Footings and ground — $145–$370 a footing, 6 of them on a 12 × 16. Rock, roots, slopes and deep frost lines add digging time.
  • Permit and tear-out — $98–$770 for the permit and inspections; $565–$2,250 to remove and dispose of the old deck first.

Ask every Greensboro deck builder the same five things: the footing type and depth, how the ledger is bolted and flashed, the fastener hardware, whether stairs, railing, permit and disposal are in the price, and the board brand and line. Compare those, not the headline price. Get a quote for your deck job →

Deck Cost in Greensboro by Size

Quick answer

12 × 16 ft (192 sq ft) in treated wood: $4,600–$10,300. 16 × 20 ft (320 sq ft): $7,200–$16,350. 20 × 20 ft (400 sq ft): $9,150–$19,650. In composite, a 12 × 16 is $8,250–$16,600 and a 20 × 20 about $15,600–$30,400.

Worked example: a Greensboro 12 × 16 treated deck is about $7,000. Add a flight of stairs at $930, swap the wood rail for aluminum (about $1,400 more on 40 ft) and the job is roughly $9,330, about 33% more, which is why two quotes for the same deck can look nothing alike until you line up what each one includes.

Height matters more than the extra 8 feet of length: a 20 × 20 is $13,550 typical against $7,000 for a 12 × 16, but lifting that 12 × 16 a story up adds $1,550–$5,400 on its own for posts, beams, bracing and deeper footings, and the stairs on top.

Greensboro Deck Costs by Material and Type

Material or typeCostBest for
Pressure-treated wood deck$24–$51 per sq ftThe cheapest deck to build. Needs cleaning and a stain or seal every 2–3 years ($330–$895 for a 12 × 16), lasts 10–25 years.
Cedar or redwood deck$29–$57 per sq ftNaturally rot-resistant, lighter and better looking than treated pine. Still needs staining; redwood is cheapest on the West Coast.
Ipe or tropical hardwood deck$39–$76 per sq ftVery dense and long-lived, but heavy, hard to cut and slow to install. Oil it yearly or let it silver.
Composite deck (Trex, TimberTech, Fiberon)$39–$76 per sq ftWood-plastic boards on a treated frame. No staining, 25–50 year life; costs 40–80% more than wood up front.
PVC deck (AZEK, TimberTech Advanced PVC)$44–$86 per sq ftAll-plastic boards: lightest, coolest underfoot, best for docks, pools and shade-free yards. The top of the price list.
Elevated or second-story deck+$8–$28 per sq ftWalkout and upper-floor decks need taller posts, bigger beams, stairs and often a structural review. Add this to any material above.
Deck railing$24–$56 wood; $44–$115 aluminum; $58–$160 composite; $98–$215 cable, per linear ftRequired on any deck more than 30 in off the ground. A 12 × 16 attached deck has about 40 linear ft of it.
Stairs, footings and permit$480–$1,850 per flight; $145–$370 per footing; $98–$770 permitThe lines a cheap quote leaves out. Footings must reach below the frost line; stairs need a handrail and their own footing.
Deck repair, staining and refinishing$285–$2,250 repair; $330–$895 stain; $565–$1,600 sand and refinishKeeping a wood deck alive. A full tear-out and haul-away is $565–$2,250 when repair stops making sense.
Covered deck, pergola or roof$2,400–$9,400 pergola; $3,850–$13,100 roof over a 12 × 16Shade and rain cover. A roof ties into the house roof or wall and needs its own permit; a pergola is the cheaper, open version.
Cost by material or type in GreensboroTypical range, per sq ft.
Pressure-treated wood deck $24–$51per sq ft
Cedar or redwood deck $29–$57per sq ft
Ipe or tropical hardwood deck $39–$76per sq ft
Composite deck (Trex, TimberTech, Fiberon) $39–$76per sq ft
PVC deck (AZEK, TimberTech Advanced PVC) $44–$86per sq ft
Elevated or second-story deck $8–$28per sq ft
Greensboro tip: ask the builder to pull the permit ($98–$770) and to show you the footing inspection sign-off before the boards go down. A deck built without a permit can hold up a home sale and is the first thing an inspector flags.

Materials vs. labor — the Greensboro deck bill

Materials for a 12 × 16 pressure-treated deck run $2,700–$5,400 at the lumber yard ($14–$28 a square foot for framing, boards, railing, hardware and concrete). The treated boards alone are $2–$5 a square foot; composite boards $5–$16. The rest of a $4,600–$10,300 job in Greensboro is a two-person crew for three to five days, the permit, the dump run and the builder's overhead.

Labor is about half of a wood deck's price and less than half of a composite one, which is why composite prices differ less between cities than wood prices do. Where carpenters earn more, a wood deck costs more; the boards cost about the same in Greensboro as anywhere else.

What's included in a Greensboro deck quote (and what costs extra)

A standard 12 × 16 price covers layout, 6 footings, a treated frame bolted and flashed to the house, the decking, a 36-inch railing, hardware and cleanup. The headline price often leaves out:

  • Stairs — $480–$1,850 per flight of 4–6 steps with handrail, plus a footing
  • Permit and inspections — $98–$770, usually passed through at cost
  • Tear-out of the old deck — $565–$2,250 for a 12 × 16, including the dump run
  • Upgraded railing — aluminum $44–$115, composite $58–$160 or cable $98–$215 a linear foot instead of wood at $24–$56

Ask for the board brand and line, the footing type and depth, and the fastener hardware in writing, and for proof of liability insurance.

What Affects Deck Costs in Greensboro

Size and shape

A 12 × 16 is $4,600–$10,300 in Greensboro; a 16 × 20 $7,200–$16,350; a 20 × 20 $9,150–$19,650. Rectangles are cheapest. Angles, curves, a picture-frame border or a diagonal board pattern add 15–20% for cutting and waste.

Decking material

Per square foot installed: treated wood $24–$51, cedar or redwood $29–$57, tropical hardwood $39–$76, composite $39–$76, PVC $44–$86. Composite and PVC cost more now and nothing to stain later.

Height off the ground

Anything over 30 inches needs a 36-inch guard and, in practice, stairs. A deck a story up adds $8–$28 a square foot for 6 × 6 posts, a bigger beam, bracing and deeper footings — $6,150–$15,700 for a 12 × 16 in Greensboro before the stairs.

Railing and stairs

Wood railing is $24–$56 a linear foot, aluminum $44–$115, composite $58–$160 and cable $98–$215. A flight of stairs with a handrail is $480–$1,850. Together they can be a third of the bill on a small deck.

Local rules and permits

North Carolina requires a general contractor license only from $40,000 a project, so most deck builders need none; check insurance, and the county or city issues the permit.

Labor rates in Greensboro

Carpenters in the Greensboro-High Point, NC metro earn a median $49,910 a year in federal wage data, about 18% below the US median. Labor is about half of a wood deck, so Greensboro prices land about 7% below the US typical of $7,500 for a 12 × 16.

Season and site

Spring and early summer are the busy months, when quotes run highest and good builders book out weeks ahead; fall and winter work can be 5–15% cheaper where the ground allows digging. A sloped yard, rock, tree roots or a backyard the crew can only reach through a gate adds 10–20% to labor.

How to Save Money on a Deck in Greensboro
  1. Keep it a rectangle, keep it low.A ground-hugging 12 × 16 rectangle is the cheapest deck in Greensboro at $4,600–$10,300. Every angle, level change and foot of height adds cutting, posts and railing.
  2. Go bigger per square foot, not smaller.Footings, the ledger, the permit and setup cost about the same at any size, so a 20 × 20 ($34 a square foot) costs less per foot than a 12 × 16 ($36). Build the size you will actually use once.
  3. Book the off-season.Deck builders in Greensboro are busiest from spring to early summer. Fall and winter slots, where the ground allows digging, run 5–15% cheaper and the deck is ready for the first warm weekend.
  4. Spend on the boards, save on the rail.Composite boards with an aluminum railing ($44–$115 a linear foot) cost less than matching composite rails ($58–$160) and look sharper. Wood railing ($24–$56) is cheapest but needs the most upkeep.
  5. Do the demolition and staining yourself.Tearing out an old deck is $565–$2,250 in Greensboro and mostly labor and dump fees; cleaning and staining a new wood deck is $330–$895 every two or three years. Both are weekend jobs for a homeowner with a truck.
  6. Get the footings and hardware in writing.Two quotes can be $2,400 apart on the same deck because one uses precast blocks instead of $145–$370 poured footings, or nails instead of structural screws and hangers. Make both quotes name the footing type, depth and hardware.
Deck Cost in Greensboro: What the Quote Should Include

Greensboro deck builders quote by the job, usually from a drawing. Before you pay a deposit, get these in writing:

  • The finished deck size and height off the ground, with a sketch showing stairs and railing runs
  • Decking named by species or brand and line (5/4 treated pine, cedar, Trex Enhance, TimberTech Prime+), with the fastener type
  • The frame: joist size and spacing, beam size, post size, and how the ledger is bolted and flashed to the house
  • Footings: type, number and depth, and who digs if rock or roots turn up
  • Railing material, height and style, and stairs as their own line with the number of steps
  • Who pulls the permit, its cost, and that the price includes passing the inspections
  • Old deck removal and disposal as its own line
  • Start and finish dates, payment stages, the workmanship warranty, the board maker's warranty, and the builder's license or registration number and insurance
Frequently asked questions — Deck cost in Greensboro
How much does it cost to build a deck in Greensboro?

$4,600–$10,300 for a 12 × 16 pressure-treated deck attached to the house with railing, and $7,000 is typical. In composite the same deck is $8,250–$16,600.

How much is a deck per square foot in Greensboro?

$24–$51 a square foot installed for treated wood, $29–$57 for cedar or redwood, $39–$76 for composite and $44–$86 for PVC. A deck a story up adds $8–$28 a square foot.

How much does a Trex or composite deck cost in Greensboro?

$8,250–$16,600 for a 12 × 16 with composite railing, or $39–$76 a square foot installed. That is about $4,850 more than treated wood on a 12 × 16, with no staining afterward.

How much does a 20 × 20 deck cost in Greensboro?

$9,150–$19,650 in pressure-treated wood with railing, and about $15,600–$30,400 in composite. A 16 × 20 is $7,200–$16,350.

Do I need a permit to build a deck in Greensboro?

Almost always for an attached deck. Under the model code, only a deck of 200 sq ft or less, under 30 inches off the ground, not attached to the house and not at an exit door is exempt. A permit here runs $98–$770 and the builder normally pulls it. North Carolina requires a general contractor license only from $40,000 a project, so most deck builders need none; check insurance, and the county or city issues the permit.

How much does it cost to replace a deck in Greensboro?

$5,165–$12,550 for a 12 × 16 in treated wood: $565–$2,250 to tear out and haul away the old one, plus the new deck. In composite it is $8,815–$18,850.

How much do deck stairs and railing cost in Greensboro?

A flight of 4–6 steps with handrail is $480–$1,850. Railing is $24–$56 a linear foot in treated wood, $44–$115 in aluminum, $58–$160 in composite and $98–$215 in cable; a 12 × 16 attached deck has about 40 ft.

How much does it cost to stain or repair a deck in Greensboro?

Cleaning and staining a 12 × 16 deck is $330–$895; sanding and refinishing $565–$1,600. Small repairs — a few boards, a loose railing — run $285–$2,250, and a safety inspection $115–$405.

How long does it take to build a deck?

Three to five working days for a 12 × 16 deck on a one-story house once the permit is in hand, plus a day or two for the footing inspection to be scheduled. An elevated deck with stairs takes one to two weeks. Permit review adds anywhere from a day to several weeks depending on the city.

What's included in a Greensboro deck quote?

Footings, the treated frame, decking, a 36-inch railing, hardware and cleanup. Often extra: stairs ($480–$1,850), the permit ($98–$770), tear-out of the old deck ($565–$2,250) and any railing upgrade.

Prices verified November 2026 · Cross-referenced against 18+ American pricing sources · See methodology

Prices for the Greensboro metro area, November 2026. Outer suburbs may vary.

Our methodology
These are independent estimates built from public cost guides, manufacturer and lumber-yard prices, dated local price pages, city permit schedules and federal wage data. No deck builder can pay to change them, so always get two or three quotes. Last reviewed November 2026. Read our full methodology →

Get a fair deck quote in Greensboro

Local deck builders · Free quotes · No obligation, no spam.

Get quotes in Greensboro →Max 2 deck builders will contact you
Get quotes in GreensboroMax 2 deck builders · free · no spam→