How much does a deck cost in Riverside?
By Our research team · Last verified · Methodology
Most deck builders in Riverside charge $4,950–$11,200 for a 12 × 16 pressure-treated deck attached to the house, with railing, and $7,750 is the typical bill. The same deck in composite runs $8,700–$17,750; a 16 × 20 wood deck $7,750–$17,800.
How we get this data- Typical
- $7,750
- Low end
- $3,200
- High end
- $16,950
Want an exact price for your job?
Tell us the job. Casey checks it by text, then up to 2 local deck builders send you a real quote. Free, no obligation.
Get my fair quote →The typical Riverside price is $7,750, 3% above the US typical of $7,500.
Riverside's price band
Riverside is pricier than 86% of the 195 US metros we price for deck work.
Building a 12 × 16 ft pressure-treated deck in Riverside costs $4,950–$11,200, attached to the house with railing, and $7,750 is typical. In composite the same deck is $8,700–$17,750. Per square foot, treated wood runs $26–$56 and composite $41–$81; a 20 × 20 wood deck is $9,800–$21,400.
As a mid-size market, Riverside prices a 12 × 16 deck about 3% above the US typical. Local pay drives it: carpenters in the Riverside-San Bernardino-Ontario, CA metro earn a median $70,880 a year (about 17% above the US median), while a treated 2 × 8 and a bag of concrete cost about the same everywhere.
California requires a contractor licensed by the CSLB (class B general or C-5 framing) for any job of $1,000 or more, labor and materials together, a limit that rose from $500 on January 1, 2025. Every attached deck needs a building permit, and in wildfire zones the boards and railing must meet the state's ignition-resistant rules. This is general information, not legal advice.
Comparing cities, or after the US-wide picture? See the national guide: Deck cost in the USA.
$4,950–$11,200 to build a 12 × 16 ft pressure-treated deck in Riverside — attached, with railing, installed — typically $7,750. Composite takes the same deck to $8,700–$17,750; a 20 × 20 wood deck is $9,800–$21,400. Verified November 2026. Get free Riverside quotes →
- 12 × 16 pressure-treated deck with railing: $4,950–$11,200 ($7,750 typical)
- Composite 12 × 16: $8,700–$17,750; per sq ft wood $26–$56, composite $41–$81
- 16 × 20 wood deck $7,750–$17,800; 20 × 20 $9,800–$21,400
- Stairs $515–$2,050 a flight; wood railing $26–$61 a linear ft; permit $100–$810
- Tear out an old 12 × 16: $630–$2,550; clean and stain: $365–$1,050
Prices verified November 2026 · Cross-referenced against 18+ American pricing sources · See methodology
Installed prices with labor, materials and hardware unless the row says otherwise; whole-deck rows include a basic railing. Riverside metro, re-verified November 2026. Stairs, permit, tear-out and railing upgrades are their own rows.
| Service | Low | Typical | High |
|---|---|---|---|
| Build a 12 × 16 ft (192 sq ft) pressure-treated wood deck, attached, with railingper deck | $4,950per deck | $7,750 | $11,200 |
| Build a 12 × 16 ft composite deck (Trex or TimberTech class) with composite railingper deck | $8,700per deck | $12,800 | $17,750 |
| Build a 16 × 20 ft (320 sq ft) pressure-treated deck with railingper deck | $7,750per deck | $11,850 | $17,800 |
| Build a 20 × 20 ft (400 sq ft) pressure-treated deck with railingper deck | $9,800per deck | $14,950 | $21,400 |
| Pressure-treated wood deck, per square foot (framing, decking, basic railing)per sq ft | $26per sq ft | $39 | $56 |
| Cedar or redwood deck, per square footper sq ft | $31per sq ft | $43 | $61 |
| Ipe or other tropical hardwood deck, per square footper sq ft | $41per sq ft | $59 | $81 |
| Composite deck (Trex, TimberTech, Fiberon), per square footper sq ft | $41per sq ft | $59 | $81 |
| PVC deck (AZEK / TimberTech Advanced PVC), per square footper sq ft | $46per sq ft | $66 | $91 |
| Elevated or second-story deck, added cost per square footper sq ft | $8per sq ft | $16 | $31 |
| Pressure-treated wood railing, per linear footper linear ft | $26per linear ft | $41 | $61 |
| Composite railing (Trex, TimberTech), per linear footper linear ft | $61per linear ft | $97 | $165 |
| Aluminum railing, per linear footper linear ft | $46per linear ft | $77 | $120 |
| Cable railing, per linear footper linear ft | $100per linear ft | $155 | $225 |
| Deck stairs, one flight of 4–6 steps with handrailper flight | $515per flight | $1,050 | $2,050 |
| Concrete footing, dug and poured, with post baseper footing | $155per footing | $285 | $410 |
| Building permit, plan review and inspectionsper permit | $100per permit | $355 | $810 |
| Tear out and haul away an old 12 × 16 deckper deck | $630per deck | $1,350 | $2,550 |
| Deck repair: replace boards, re-fasten railing, small jobper job | $315per job | $940 | $2,550 |
| Clean and stain or seal a 12 × 16 deck, no sandingper deck | $365per deck | $630 | $1,050 |
| Sand and refinish a 12 × 16 deck (strip, sand, stain)per deck | $630per deck | $1,150 | $1,850 |
| Pergola over a deck, 12 × 12 to 12 × 16, installedper pergola | $2,550per pergola | $5,650 | $10,150 |
| Roof over a 12 × 16 deck (covered deck, shingled, open sides)per deck | $4,100per deck | $8,250 | $14,250 |
| Deck inspection (safety or pre-sale)per inspection | $130per inspection | $260 | $465 |
Got it as a PDF or photo? Upload up to 3 quotes and compare →
Get free quotes from up to 2 local deck builders in Riverside
Free · No obligation · About a minute
- 1The job
- 2Budget
- 3Your details
What kind of deck job is it?
Tap one to start.
What's your rough budget?
A ballpark is fine. It helps the deck builders who reply.
Where should they text you?
- Max 2 deck builders. No call floods.
- 100% free. No obligation.
- 🔒 Only your matched deck builders see your number.
By continuing you agree to our Terms and Privacy Policy, and to texts from LocalGoingRate and up to 2 deck builders about this request.Msg & data rates may apply · frequency varies · STOP to end · HELP for help
Check your phone
Prices verified November 2026 · Cross-referenced against 18+ American pricing sources · See methodology
Figures are for the Riverside metro area. Trip charges can apply on the far edges; small, hard-to-reach yards in Downtown Riverside & the Eastside cost the most per square foot.
Deck prices across Riverside
Where you live changes the labor and the access, not the lumber. Tight lots in Downtown Riverside & the Eastside take the longest; decks in Ontario, Rancho Cucamonga & Pomona price near the city typical but run bigger.
Downtown Riverside & the Eastside
- 12 × 16 treated deck
- $5,250–$12,550 per deck
- Composite deck
- $9,200–$19,900 / 12 × 16 composite deck
The priciest part of the metro to build: materials get carried through the house or over a fence, there is nowhere to stage a dumpster, and historic-district rules can decide what the railing looks like.
San Bernardino & Rialto
- 12 × 16 treated deck
- $5,050–$11,750 per deck
- Composite deck
- $8,850–$18,650 / 12 × 16 composite deck
Lots of whole-house renovations with a deck tacked on. Quotes vary widely here, so get two and make both name the footing type and the fastener hardware.
Moreno Valley & Perris
- 12 × 16 treated deck
- $4,950–$11,200 per deck
- Composite deck
- $8,700–$17,750 / 12 × 16 composite deck
Residential streets with average pricing. A simple rectangle on a one-story house with no stairs is the cheapest deck you can build here.
Ontario, Rancho Cucamonga & Pomona
- 12 × 16 treated deck
- $4,950–$11,750 per deck
- Composite deck
- $8,700–$18,650 / 12 × 16 composite deck
Plenty of newer houses with sliding doors already framed for a deck. Expect average rates plus more square feet, railing and stairs per job.
Real-World Deck Costs in Riverside
Here's what common deck jobs cost in Riverside in 2026, footings, frame, decking, basic railing and hardware included.
12 × 16 pressure-treated deck, one step off the ground — 3 to 5 days
Six footings, a treated frame bolted to the house, 192 sq ft of 5/4 boards and a wood railing. Most Riverside decks on a one-story house land here; a dark stain, picture-frame border or a short stair run pushes the bill toward $11,200.
Same deck in composite with composite railing
The frame is still treated lumber; the boards and rails are composite. About $5,050 more than wood on a 12 × 16 in Riverside, and the saving is the stain job you never pay for: $365–$1,050 every two or three years on wood.
Replace a rotted 12 × 16 deck, like for like — 4 to 6 days
Tear-out and disposal ($630–$2,550) plus the new deck ($7,750 typical). Builders often find the ledger board or the rim joist rotted behind the old deck; budget for new flashing and a few feet of siding repair.
Walkout deck a story up, 12 × 16, with stairs — 1 to 2 weeks
Taller 6 × 6 posts, a bigger beam, 6 deeper footings and a flight of stairs ($515–$2,050). Elevated work adds $8–$31 a square foot in Riverside, and the city will want to see the ledger bolts and the guard height at inspection.
20 × 20 pressure-treated deck for a big backyard — 1 to 2 weeks
Twice the boards of a 12 × 16 but not twice the price: $14,950 typical against $7,750. The permit ($100–$810) is the same, and 9 footings instead of 6. Composite at this size runs $16,400–$32,400.
How much does a deck cost in Riverside?
A 12 × 16 pressure-treated deck in Riverside costs $4,950 to $11,200. The middle of the market, about $7,750, buys 6 poured footings, a 2 × 8 treated frame with joist hangers, 5/4 deck boards, a 36-inch wood railing and a permit pulled by the builder. Composite boards ($41–$81 a square foot) and stairs ($515–$2,050) are the common upgrades.
If the deck sits a story up, add $8–$31 a square foot for taller posts, bigger beams and the stair run: a 12 × 16 walkout deck is $6,500–$17,150 here before the stairs. Figures re-checked against 18 sources in November 2026.
Deck prices in Riverside (2026): by size, material and extras
A 12 × 16 pressure-treated deck costs $4,950–$11,200, the same deck in composite $8,700–$17,750, and a 20 × 20 wood deck $9,800–$21,400.
| Line on the quote | Low | Typical | High |
|---|---|---|---|
| 12 × 16 pressure-treated deck with railing | $4,950 | $7,750 | $11,200 |
| 12 × 16 composite deck with composite railing | $8,700 | $12,800 | $17,750 |
| 20 × 20 pressure-treated deck with railing | $9,800 | $14,950 | $21,400 |
| Composite decking, per sq ft installed | $41 | $59 | $81 |
| Deck stairs, one flight with handrail | $515 | $1,050 | $2,050 |
| Building permit | $100 | $355 | $810 |
| Tear out and haul away a 12 × 16 deck | $630 | $1,350 | $2,550 |
| Clean and stain a 12 × 16 deck | $365 | $630 | $1,050 |
Per square foot, the big deck wins: a 20 × 20 at $14,950 typical is $37 a square foot in Riverside, against $40 for a 12 × 16. Footings, the ledger, the permit and setup cost about the same whatever the size.
What moves a deck quote in Riverside:
- Boards — treated wood is $26–$56 a square foot installed; cedar $31–$61; composite $41–$81; PVC $46–$91. The frame underneath is treated lumber either way.
- Height — a deck more than 30 inches off the ground needs a 36-inch railing; a walkout a story up adds $8–$31 a square foot for posts, beams and stairs.
- Railing — about 40 linear ft on a 12 × 16: $1,050–$2,450 in wood, $1,850–$4,800 in aluminum, $2,450–$6,600 in composite, $4,000–$9,000 in cable.
- Footings and ground — $155–$410 a footing, 6 of them on a 12 × 16. Rock, roots, slopes and deep frost lines add digging time.
- Permit and tear-out — $100–$810 for the permit and inspections; $630–$2,550 to remove and dispose of the old deck first.
Ask every Riverside deck builder the same five things: the footing type and depth, how the ledger is bolted and flashed, the fastener hardware, whether stairs, railing, permit and disposal are in the price, and the board brand and line. Compare those, not the headline price. Get a quote for your deck job →
Deck Cost in Riverside by Size
12 × 16 ft (192 sq ft) in treated wood: $4,950–$11,200. 16 × 20 ft (320 sq ft): $7,750–$17,800. 20 × 20 ft (400 sq ft): $9,800–$21,400. In composite, a 12 × 16 is $8,700–$17,750 and a 20 × 20 about $16,400–$32,400.
Worked example: a Riverside 12 × 16 treated deck is about $7,750. Add a flight of stairs at $1,050, swap the wood rail for aluminum (about $1,450 more on 40 ft) and the job is roughly $10,250, about 32% more, which is why two quotes for the same deck can look nothing alike until you line up what each one includes.
Height matters more than the extra 8 feet of length: a 20 × 20 is $14,950 typical against $7,750 for a 12 × 16, but lifting that 12 × 16 a story up adds $1,550–$5,950 on its own for posts, beams, bracing and deeper footings, and the stairs on top.
Riverside Deck Costs by Material and Type
| Material or type | Cost | Best for |
|---|---|---|
| Pressure-treated wood deck | $26–$56 per sq ft | The cheapest deck to build. Needs cleaning and a stain or seal every 2–3 years ($365–$1,050 for a 12 × 16), lasts 10–25 years. |
| Cedar or redwood deck | $31–$61 per sq ft | Naturally rot-resistant, lighter and better looking than treated pine. Still needs staining; redwood is cheapest on the West Coast. |
| Ipe or tropical hardwood deck | $41–$81 per sq ft | Very dense and long-lived, but heavy, hard to cut and slow to install. Oil it yearly or let it silver. |
| Composite deck (Trex, TimberTech, Fiberon) | $41–$81 per sq ft | Wood-plastic boards on a treated frame. No staining, 25–50 year life; costs 40–80% more than wood up front. |
| PVC deck (AZEK, TimberTech Advanced PVC) | $46–$91 per sq ft | All-plastic boards: lightest, coolest underfoot, best for docks, pools and shade-free yards. The top of the price list. |
| Elevated or second-story deck | +$8–$31 per sq ft | Walkout and upper-floor decks need taller posts, bigger beams, stairs and often a structural review. Add this to any material above. |
| Deck railing | $26–$61 wood; $46–$120 aluminum; $61–$165 composite; $100–$225 cable, per linear ft | Required on any deck more than 30 in off the ground. A 12 × 16 attached deck has about 40 linear ft of it. |
| Stairs, footings and permit | $515–$2,050 per flight; $155–$410 per footing; $100–$810 permit | The lines a cheap quote leaves out. Footings must reach below the frost line; stairs need a handrail and their own footing. |
| Deck repair, staining and refinishing | $315–$2,550 repair; $365–$1,050 stain; $630–$1,850 sand and refinish | Keeping a wood deck alive. A full tear-out and haul-away is $630–$2,550 when repair stops making sense. |
| Covered deck, pergola or roof | $2,550–$10,150 pergola; $4,100–$14,250 roof over a 12 × 16 | Shade and rain cover. A roof ties into the house roof or wall and needs its own permit; a pergola is the cheaper, open version. |
Materials vs. labor — the Riverside deck bill
Materials for a 12 × 16 pressure-treated deck run $2,700–$5,400 at the lumber yard ($14–$28 a square foot for framing, boards, railing, hardware and concrete). The treated boards alone are $2–$5 a square foot; composite boards $5–$16. The rest of a $4,950–$11,200 job in Riverside is a two-person crew for three to five days, the permit, the dump run and the builder's overhead.
Labor is about half of a wood deck's price and less than half of a composite one, which is why composite prices differ less between cities than wood prices do. Where carpenters earn more, a wood deck costs more; the boards cost about the same in Riverside as anywhere else.
What's included in a Riverside deck quote (and what costs extra)
A standard 12 × 16 price covers layout, 6 footings, a treated frame bolted and flashed to the house, the decking, a 36-inch railing, hardware and cleanup. The headline price often leaves out:
- Stairs — $515–$2,050 per flight of 4–6 steps with handrail, plus a footing
- Permit and inspections — $100–$810, usually passed through at cost
- Tear-out of the old deck — $630–$2,550 for a 12 × 16, including the dump run
- Upgraded railing — aluminum $46–$120, composite $61–$165 or cable $100–$225 a linear foot instead of wood at $26–$61
Ask for the board brand and line, the footing type and depth, and the fastener hardware in writing, and for proof of liability insurance.
Size and shape
A 12 × 16 is $4,950–$11,200 in Riverside; a 16 × 20 $7,750–$17,800; a 20 × 20 $9,800–$21,400. Rectangles are cheapest. Angles, curves, a picture-frame border or a diagonal board pattern add 15–20% for cutting and waste.
Decking material
Per square foot installed: treated wood $26–$56, cedar or redwood $31–$61, tropical hardwood $41–$81, composite $41–$81, PVC $46–$91. Composite and PVC cost more now and nothing to stain later.
Height off the ground
Anything over 30 inches needs a 36-inch guard and, in practice, stairs. A deck a story up adds $8–$31 a square foot for 6 × 6 posts, a bigger beam, bracing and deeper footings — $6,500–$17,150 for a 12 × 16 in Riverside before the stairs.
Railing and stairs
Wood railing is $26–$61 a linear foot, aluminum $46–$120, composite $61–$165 and cable $100–$225. A flight of stairs with a handrail is $515–$2,050. Together they can be a third of the bill on a small deck.
Local rules and permits
California requires a contractor licensed by the CSLB (class B general or C-5 framing) for any job of $1,000 or more, labor and materials together, a limit that rose from $500 on January 1, 2025. Every attached deck needs a building permit, and in wildfire zones the boards and railing must meet the state's ignition-resistant rules.
Labor rates in Riverside
Carpenters in the Riverside-San Bernardino-Ontario, CA metro earn a median $70,880 a year in federal wage data, about 17% above the US median. Labor is about half of a wood deck, so Riverside prices land about 3% above the US typical of $7,500 for a 12 × 16.
Season and site
Spring and early summer are the busy months, when quotes run highest and good builders book out weeks ahead; fall and winter work can be 5–15% cheaper where the ground allows digging. A sloped yard, rock, tree roots or a backyard the crew can only reach through a gate adds 10–20% to labor.
- Keep it a rectangle, keep it low.A ground-hugging 12 × 16 rectangle is the cheapest deck in Riverside at $4,950–$11,200. Every angle, level change and foot of height adds cutting, posts and railing.
- Go bigger per square foot, not smaller.Footings, the ledger, the permit and setup cost about the same at any size, so a 20 × 20 ($37 a square foot) costs less per foot than a 12 × 16 ($40). Build the size you will actually use once.
- Book the off-season.Deck builders in Riverside are busiest from spring to early summer. Fall and winter slots, where the ground allows digging, run 5–15% cheaper and the deck is ready for the first warm weekend.
- Spend on the boards, save on the rail.Composite boards with an aluminum railing ($46–$120 a linear foot) cost less than matching composite rails ($61–$165) and look sharper. Wood railing ($26–$61) is cheapest but needs the most upkeep.
- Do the demolition and staining yourself.Tearing out an old deck is $630–$2,550 in Riverside and mostly labor and dump fees; cleaning and staining a new wood deck is $365–$1,050 every two or three years. Both are weekend jobs for a homeowner with a truck.
- Get the footings and hardware in writing.Two quotes can be $2,800 apart on the same deck because one uses precast blocks instead of $155–$410 poured footings, or nails instead of structural screws and hangers. Make both quotes name the footing type, depth and hardware.
Riverside deck builders quote by the job, usually from a drawing. Before you pay a deposit, get these in writing:
- The finished deck size and height off the ground, with a sketch showing stairs and railing runs
- Decking named by species or brand and line (5/4 treated pine, cedar, Trex Enhance, TimberTech Prime+), with the fastener type
- The frame: joist size and spacing, beam size, post size, and how the ledger is bolted and flashed to the house
- Footings: type, number and depth, and who digs if rock or roots turn up
- Railing material, height and style, and stairs as their own line with the number of steps
- Who pulls the permit, its cost, and that the price includes passing the inspections
- Old deck removal and disposal as its own line
- Start and finish dates, payment stages, the workmanship warranty, the board maker's warranty, and the builder's license or registration number and insurance
How much does it cost to build a deck in Riverside?
$4,950–$11,200 for a 12 × 16 pressure-treated deck attached to the house with railing, and $7,750 is typical. In composite the same deck is $8,700–$17,750.
How much is a deck per square foot in Riverside?
$26–$56 a square foot installed for treated wood, $31–$61 for cedar or redwood, $41–$81 for composite and $46–$91 for PVC. A deck a story up adds $8–$31 a square foot.
How much does a Trex or composite deck cost in Riverside?
$8,700–$17,750 for a 12 × 16 with composite railing, or $41–$81 a square foot installed. That is about $5,050 more than treated wood on a 12 × 16, with no staining afterward.
How much does a 20 × 20 deck cost in Riverside?
$9,800–$21,400 in pressure-treated wood with railing, and about $16,400–$32,400 in composite. A 16 × 20 is $7,750–$17,800.
Do I need a permit to build a deck in Riverside?
Almost always for an attached deck. Under the model code, only a deck of 200 sq ft or less, under 30 inches off the ground, not attached to the house and not at an exit door is exempt. A permit here runs $100–$810 and the builder normally pulls it. California requires a contractor licensed by the CSLB (class B general or C-5 framing) for any job of $1,000 or more, labor and materials together, a limit that rose from $500 on January 1, 2025. Every attached deck needs a building permit, and in wildfire zones the boards and railing must meet the state's ignition-resistant rules.
How much does it cost to replace a deck in Riverside?
$5,580–$13,750 for a 12 × 16 in treated wood: $630–$2,550 to tear out and haul away the old one, plus the new deck. In composite it is $9,330–$20,300.
How much do deck stairs and railing cost in Riverside?
A flight of 4–6 steps with handrail is $515–$2,050. Railing is $26–$61 a linear foot in treated wood, $46–$120 in aluminum, $61–$165 in composite and $100–$225 in cable; a 12 × 16 attached deck has about 40 ft.
How much does it cost to stain or repair a deck in Riverside?
Cleaning and staining a 12 × 16 deck is $365–$1,050; sanding and refinishing $630–$1,850. Small repairs — a few boards, a loose railing — run $315–$2,550, and a safety inspection $130–$465.
How long does it take to build a deck?
Three to five working days for a 12 × 16 deck on a one-story house once the permit is in hand, plus a day or two for the footing inspection to be scheduled. An elevated deck with stairs takes one to two weeks. Permit review adds anywhere from a day to several weeks depending on the city.
What's included in a Riverside deck quote?
Footings, the treated frame, decking, a 36-inch railing, hardware and cleanup. Often extra: stairs ($515–$2,050), the permit ($100–$810), tear-out of the old deck ($630–$2,550) and any railing upgrade.
Prices verified November 2026 · Cross-referenced against 18+ American pricing sources · See methodology
Prices for the Riverside metro area, November 2026. Outer suburbs may vary.
Get a fair deck quote in Riverside
Local deck builders · Free quotes · No obligation, no spam.