Skip to content
Independent United States Cost GuidesPrices verified November 2026 · 39 trades · 195 US cities · 221+ sources For pros →
Get a fair quote

Cost guides

Plumbing & water4 trades
Electrical & energy5 trades
Renovation8 trades
Structural7 trades
Outdoor & yard7 trades
Cleaning & maintenance8 trades

More

Get a fair quote
Cost guide

How much does a deck cost in Arlington?

By Our research team · Last verified · Methodology

Updated November 2026Independently researched13 min read
Deck cost

Deck costs in Arlington

Arlington, TXChange location
Get free quotesFree · no obligation · max 2 pros
Normal range for Arlington, TX
$4,650–$10,350per deck

Most deck builders in Arlington charge $4,650–$10,350 for a 12 × 16 pressure-treated deck about $36 a square foot, with $7,050 the going rate. Composite is $39–$76 a square foot here, and a new railing $24–$56 a linear foot in wood.

How we get this data
Typical
$7,050
Low end
$2,650
High end
$14,050
12 × 16 treated deck
$4,650–$10,350
12 × 16 composite deck
$8,250–$16,650
20 × 20 treated deck
$9,150–$19,750
Stairs, one flight
$480–$1,850

Want an exact price for your job?

Tell us the job. Casey checks it by text, then up to 2 local deck builders send you a real quote. Free, no obligation.

Get my fair quote →
Typical deck price: Arlington vs nearby citiesTypical price, per deck. The line marks the US typical.
Austin, TX $7,150
Dallas, TX $7,100
Arlington, TXThis guide $7,050
Waco, TX $6,950
Killeen, TX $6,950

The typical Arlington price is $7,050, 6% below the US typical of $7,500.

Where Arlington sits among 195 US metrosNumber of metros at each typical deck price, per deck.

Arlington's price band

Arlington is cheaper than 71% of the 195 US metros we price for deck work.

A deck builder in Arlington charges $4,650–$10,350 for a 12 × 16 pressure-treated deck with railing, and most homeowners pay about $7,050. Stairs add $480–$1,850 a flight, a building permit $98–$770, and tearing out an old deck first $565–$2,250. Composite boards take the same deck to $8,250–$16,650.

As a mid-size market, Arlington prices a 12 × 16 deck about 6% below the US typical. Local pay drives it: carpenters in the Dallas-Fort Worth-Arlington, TX metro earn a median $48,740 a year (about 20% below the US median), while a treated 2 × 8 and a bag of concrete cost about the same everywhere.

Texas has no state license for general or deck contractors and no dollar limit, but most cities require contractors to register before pulling a permit, and an attached deck needs one. This is general information, not legal advice.

Comparing cities, or after the US-wide picture? See the national guide: Deck cost in the USA.

Quick answer

$4,650–$10,350 to build a 12 × 16 ft pressure-treated deck in Arlington — attached, with railing, installed — typically $7,050. Composite takes the same deck to $8,250–$16,650; a 20 × 20 wood deck is $9,150–$19,750. Verified November 2026. Get free Arlington quotes →

  • 12 × 16 pressure-treated deck with railing: $4,650–$10,350 ($7,050 typical)
  • Composite 12 × 16: $8,250–$16,650; per sq ft wood $24–$52, composite $39–$76
  • 16 × 20 wood deck $7,250–$16,450; 20 × 20 $9,150–$19,750
  • Stairs $480–$1,850 a flight; wood railing $24–$56 a linear ft; permit $98–$770
  • Tear out an old 12 × 16: $565–$2,250; clean and stain: $330–$905

Prices verified November 2026 · Cross-referenced against 18+ American pricing sources · See methodology

Detailed pricing — Deck cost in Arlington 2026

Installed prices with labor, materials and hardware unless the row says otherwise; whole-deck rows include a basic railing. Arlington metro, re-verified November 2026. Stairs, permit, tear-out and railing upgrades are their own rows.

ServiceLowTypicalHigh
Build a 12 × 16 ft (192 sq ft) pressure-treated wood deck, attached, with railingper deck$4,650per deck$7,050$10,350
Build a 12 × 16 ft composite deck (Trex or TimberTech class) with composite railingper deck$8,250per deck$11,900$16,650
Build a 16 × 20 ft (320 sq ft) pressure-treated deck with railingper deck$7,250per deck$10,800$16,450
Build a 20 × 20 ft (400 sq ft) pressure-treated deck with railingper deck$9,150per deck$13,600$19,750
Pressure-treated wood deck, per square foot (framing, decking, basic railing)per sq ft$24per sq ft$36$52
Cedar or redwood deck, per square footper sq ft$29per sq ft$40$57
Ipe or other tropical hardwood deck, per square footper sq ft$39per sq ft$55$76
Composite deck (Trex, TimberTech, Fiberon), per square footper sq ft$39per sq ft$55$76
PVC deck (AZEK / TimberTech Advanced PVC), per square footper sq ft$44per sq ft$62$86
Elevated or second-story deck, added cost per square footper sq ft$8per sq ft$14$28
Pressure-treated wood railing, per linear footper linear ft$24per linear ft$37$56
Composite railing (Trex, TimberTech), per linear footper linear ft$58per linear ft$91$160
Aluminum railing, per linear footper linear ft$44per linear ft$72$115
Cable railing, per linear footper linear ft$98per linear ft$145$215
Deck stairs, one flight of 4–6 steps with handrailper flight$480per flight$935$1,850
Concrete footing, dug and poured, with post baseper footing$145per footing$255$370
Building permit, plan review and inspectionsper permit$98per permit$335$770
Tear out and haul away an old 12 × 16 deckper deck$565per deck$1,150$2,250
Deck repair: replace boards, re-fasten railing, small jobper job$285per job$825$2,300
Clean and stain or seal a 12 × 16 deck, no sandingper deck$330per deck$540$905
Sand and refinish a 12 × 16 deck (strip, sand, stain)per deck$565per deck$995$1,650
Pergola over a deck, 12 × 12 to 12 × 16, installedper pergola$2,400per pergola$5,200$9,450
Roof over a 12 × 16 deck (covered deck, shingled, open sides)per deck$3,850per deck$7,500$13,150
Deck inspection (safety or pre-sale)per inspection$120per inspection$225$405
Bigger deck jobs in Arlington: what they costPer deck, low to high with the typical price marked. Every line is in the table above.
Build a 20 × 20 ft (400 sq ft) pressure-treated deck with railing $13,600$9,150–$19.8K
Build a 12 × 16 ft composite deck (Trex or TimberTech class) with composite railing $11,900$8,250–$16.6K
Build a 16 × 20 ft (320 sq ft) pressure-treated deck with railing $10,800$7,250–$16.4K
Roof over a 12 × 16 deck (covered deck, shingled, open sides) $7,500$3,850–$13.2K
Build a 12 × 16 ft (192 sq ft) pressure-treated wood deck, attached, with railing $7,050$4,650–$10.3K
Smaller deck jobs and repairs in ArlingtonPer deck, low to high with the typical price marked. Every line is in the table above.
Tear out and haul away an old 12 × 16 deck $1,150$565–$2,250
Sand and refinish a 12 × 16 deck (strip, sand, stain) $995$565–$1,650
Clean and stain or seal a 12 × 16 deck, no sanding $540$330–$905
Already got a quote?
Check it against these Arlington prices — free, no sign-up.
$

Got it as a PDF or photo? Upload up to 3 quotes and compare →

Free quotes

Get free quotes from up to 2 local deck builders in Arlington

Free · No obligation · About a minute

  1. 1The job
  2. 2Budget
  3. 3Your details
Casey · LocalGoingRate

What kind of deck job is it?

Tap one to start.

Prices verified November 2026 · Cross-referenced against 18+ American pricing sources · See methodology

Prices cover the Arlington metro. Outlying towns can run a little lower; tight lots and older houses in Downtown Arlington & UTA and East Arlington sit at the top of each range for access and ledger work.

How deck costs vary across Arlington

Deck prices across Arlington

Where you live changes the labor and the access, not the lumber. Tight lots in Downtown Arlington & UTA take the longest; decks in Downtown Arlington & UTA tend to come in at or under the city typical.

Deck prices across ArlingtonTypical range by part of the metro, per deck. The line marks the Arlington typical.
Downtown Arlington & UTA2–4% below $4,450–$10.2Kper deck
East ArlingtonStandard to 5% above $4,750–$10.8Kper deck
Grand Prairie & MansfieldStandard pricing $4,650–$10.3Kper deck
Hurst, Euless & BedfordStandard; bigger decks, HOA review $4,650–$10.8Kper deck

Downtown Arlington & UTA

2–4% below
Downtown Arlington, UT Arlington, Entertainment District
12 × 16 treated deck
$4,450–$10,150 per deck
Composite deck
$7,900–$16,300 / 12 × 16 composite deck

Rental-heavy streets where small repairs and board replacements outnumber new builds. Rates run at or just under the city average.

East Arlington

Standard to 5% above
East Arlington, Lake Arlington
12 × 16 treated deck
$4,750–$10,850 per deck
Composite deck
$8,400–$17,500 / 12 × 16 composite deck

A remodel-heavy area where many jobs are rebuilds of a rotted deck on an old house. Ask for the demolition and disposal as its own line, and expect surprises at the ledger.

Grand Prairie & Mansfield

Standard pricing
Grand Prairie, Mansfield, Kennedale
12 × 16 treated deck
$4,650–$10,350 per deck
Composite deck
$8,250–$16,650 / 12 × 16 composite deck

Settled neighborhoods with room to stage lumber and a dumpster. Expect average rates and plenty of straightforward attached decks.

Hurst, Euless & Bedford

Standard; bigger decks, HOA review
Hurst, Euless, Bedford, Pantego
12 × 16 treated deck
$4,650–$10,850 per deck
Composite deck
$8,250–$17,500 / 12 × 16 composite deck

Newer homes with easy access and room for a crew, so rates sit near the city average. The decks are bigger, and some builders add a trip charge for distance.

What you'll actually pay — job by job

Real-World Deck Costs in Arlington

Here's what common deck jobs cost in Arlington in 2026, footings, frame, decking, basic railing and hardware included.

12 × 16 pressure-treated deck, one step off the ground — 3 to 5 days

$4,650–$7,050

Six footings, a treated frame bolted to the house, 192 sq ft of 5/4 boards and a wood railing. Most Arlington decks on a one-story house land here; a dark stain, picture-frame border or a short stair run pushes the bill toward $10,350.

Same deck in composite with composite railing

$8,250–$16,650

The frame is still treated lumber; the boards and rails are composite. About $4,850 more than wood on a 12 × 16 in Arlington, and the saving is the stain job you never pay for: $330–$905 every two or three years on wood.

Replace a rotted 12 × 16 deck, like for like — 4 to 6 days

$5,215–$12,600

Tear-out and disposal ($565–$2,250) plus the new deck ($7,050 typical). Builders often find the ledger board or the rim joist rotted behind the old deck; budget for new flashing and a few feet of siding repair.

Walkout deck a story up, 12 × 16, with stairs — 1 to 2 weeks

$6,680–$17,600

Taller 6 × 6 posts, a bigger beam, 6 deeper footings and a flight of stairs ($480–$1,850). Elevated work adds $8–$28 a square foot in Arlington, and the city will want to see the ledger bolts and the guard height at inspection.

20 × 20 pressure-treated deck for a big backyard — 1 to 2 weeks

$9,150–$19,750

Twice the boards of a 12 × 16 but not twice the price: $13,600 typical against $7,050. The permit ($98–$770) is the same, and 9 footings instead of 6. Composite at this size runs $15,600–$30,400.

How much does a deck cost in Arlington?

A 12 × 16 pressure-treated deck in Arlington costs $4,650 to $10,350. The middle of the market, about $7,050, buys 6 poured footings, a 2 × 8 treated frame with joist hangers, 5/4 deck boards, a 36-inch wood railing and a permit pulled by the builder. Composite boards ($39–$76 a square foot) and stairs ($480–$1,850) are the common upgrades.

If the deck sits a story up, add $8–$28 a square foot for taller posts, bigger beams and the stair run: a 12 × 16 walkout deck is $6,200–$15,750 here before the stairs. Figures re-checked against 18 sources in November 2026.

Deck prices in Arlington (2026): by size, material and extras

A 12 × 16 pressure-treated deck costs $4,650–$10,350, the same deck in composite $8,250–$16,650, and a 20 × 20 wood deck $9,150–$19,750.

Line on the quoteLowTypicalHigh
12 × 16 pressure-treated deck with railing$4,650$7,050$10,350
12 × 16 composite deck with composite railing$8,250$11,900$16,650
20 × 20 pressure-treated deck with railing$9,150$13,600$19,750
Composite decking, per sq ft installed$39$55$76
Deck stairs, one flight with handrail$480$935$1,850
Building permit$98$335$770
Tear out and haul away a 12 × 16 deck$565$1,150$2,250
Clean and stain a 12 × 16 deck$330$540$905

Per square foot, the big deck wins: a 20 × 20 at $13,600 typical is $34 a square foot in Arlington, against $37 for a 12 × 16. Footings, the ledger, the permit and setup cost about the same whatever the size.

What moves a deck quote in Arlington:

  • Boards — treated wood is $24–$52 a square foot installed; cedar $29–$57; composite $39–$76; PVC $44–$86. The frame underneath is treated lumber either way.
  • Height — a deck more than 30 inches off the ground needs a 36-inch railing; a walkout a story up adds $8–$28 a square foot for posts, beams and stairs.
  • Railing — about 40 linear ft on a 12 × 16: $960–$2,250 in wood, $1,750–$4,600 in aluminum, $2,300–$6,400 in composite, $3,900–$8,600 in cable.
  • Footings and ground — $145–$370 a footing, 6 of them on a 12 × 16. Rock, roots, slopes and deep frost lines add digging time.
  • Permit and tear-out — $98–$770 for the permit and inspections; $565–$2,250 to remove and dispose of the old deck first.

Ask every Arlington deck builder the same five things: the footing type and depth, how the ledger is bolted and flashed, the fastener hardware, whether stairs, railing, permit and disposal are in the price, and the board brand and line. Compare those, not the headline price. Get a quote for your deck job →

Deck Cost in Arlington by Size

Quick answer

12 × 16 ft (192 sq ft) in treated wood: $4,650–$10,350. 16 × 20 ft (320 sq ft): $7,250–$16,450. 20 × 20 ft (400 sq ft): $9,150–$19,750. In composite, a 12 × 16 is $8,250–$16,650 and a 20 × 20 about $15,600–$30,400.

Worked example: a Arlington 12 × 16 treated deck is about $7,050. Add a flight of stairs at $935, swap the wood rail for aluminum (about $1,400 more on 40 ft) and the job is roughly $9,385, about 33% more, which is why two quotes for the same deck can look nothing alike until you line up what each one includes.

Height matters more than the extra 8 feet of length: a 20 × 20 is $13,600 typical against $7,050 for a 12 × 16, but lifting that 12 × 16 a story up adds $1,550–$5,400 on its own for posts, beams, bracing and deeper footings, and the stairs on top.

Arlington Deck Costs by Material and Type

Material or typeCostBest for
Pressure-treated wood deck$24–$52 per sq ftThe cheapest deck to build. Needs cleaning and a stain or seal every 2–3 years ($330–$905 for a 12 × 16), lasts 10–25 years.
Cedar or redwood deck$29–$57 per sq ftNaturally rot-resistant, lighter and better looking than treated pine. Still needs staining; redwood is cheapest on the West Coast.
Ipe or tropical hardwood deck$39–$76 per sq ftVery dense and long-lived, but heavy, hard to cut and slow to install. Oil it yearly or let it silver.
Composite deck (Trex, TimberTech, Fiberon)$39–$76 per sq ftWood-plastic boards on a treated frame. No staining, 25–50 year life; costs 40–80% more than wood up front.
PVC deck (AZEK, TimberTech Advanced PVC)$44–$86 per sq ftAll-plastic boards: lightest, coolest underfoot, best for docks, pools and shade-free yards. The top of the price list.
Elevated or second-story deck+$8–$28 per sq ftWalkout and upper-floor decks need taller posts, bigger beams, stairs and often a structural review. Add this to any material above.
Deck railing$24–$56 wood; $44–$115 aluminum; $58–$160 composite; $98–$215 cable, per linear ftRequired on any deck more than 30 in off the ground. A 12 × 16 attached deck has about 40 linear ft of it.
Stairs, footings and permit$480–$1,850 per flight; $145–$370 per footing; $98–$770 permitThe lines a cheap quote leaves out. Footings must reach below the frost line; stairs need a handrail and their own footing.
Deck repair, staining and refinishing$285–$2,300 repair; $330–$905 stain; $565–$1,650 sand and refinishKeeping a wood deck alive. A full tear-out and haul-away is $565–$2,250 when repair stops making sense.
Covered deck, pergola or roof$2,400–$9,450 pergola; $3,850–$13,150 roof over a 12 × 16Shade and rain cover. A roof ties into the house roof or wall and needs its own permit; a pergola is the cheaper, open version.
Cost by material or type in ArlingtonTypical range, per sq ft.
Pressure-treated wood deck $24–$52per sq ft
Cedar or redwood deck $29–$57per sq ft
Ipe or tropical hardwood deck $39–$76per sq ft
Composite deck (Trex, TimberTech, Fiberon) $39–$76per sq ft
PVC deck (AZEK, TimberTech Advanced PVC) $44–$86per sq ft
Elevated or second-story deck $8–$28per sq ft
Arlington tip: if the old deck is being replaced, have the builder check the ledger board and rim joist before quoting a rebuild on the existing frame. Rot behind the ledger is the most common surprise, and the cheapest time to fix it is with the deck off.

Materials vs. labor — the Arlington deck bill

Materials for a 12 × 16 pressure-treated deck run $2,700–$5,400 at the lumber yard ($14–$28 a square foot for framing, boards, railing, hardware and concrete). The treated boards alone are $2–$5 a square foot; composite boards $5–$16. The rest of a $4,650–$10,350 job in Arlington is a two-person crew for three to five days, the permit, the dump run and the builder's overhead.

Labor is about half of a wood deck's price and less than half of a composite one, which is why composite prices differ less between cities than wood prices do. Where carpenters earn more, a wood deck costs more; the boards cost about the same in Arlington as anywhere else.

What's included in an Arlington deck quote (and what costs extra)

A standard 12 × 16 price covers layout, 6 footings, a treated frame bolted and flashed to the house, the decking, a 36-inch railing, hardware and cleanup. The headline price often leaves out:

  • Stairs — $480–$1,850 per flight of 4–6 steps with handrail, plus a footing
  • Permit and inspections — $98–$770, usually passed through at cost
  • Tear-out of the old deck — $565–$2,250 for a 12 × 16, including the dump run
  • Upgraded railing — aluminum $44–$115, composite $58–$160 or cable $98–$215 a linear foot instead of wood at $24–$56

Ask for the board brand and line, the footing type and depth, and the fastener hardware in writing, and for proof of liability insurance.

What Affects Deck Costs in Arlington

Size and shape

A 12 × 16 is $4,650–$10,350 in Arlington; a 16 × 20 $7,250–$16,450; a 20 × 20 $9,150–$19,750. Rectangles are cheapest. Angles, curves, a picture-frame border or a diagonal board pattern add 15–20% for cutting and waste.

Decking material

Per square foot installed: treated wood $24–$52, cedar or redwood $29–$57, tropical hardwood $39–$76, composite $39–$76, PVC $44–$86. Composite and PVC cost more now and nothing to stain later.

Height off the ground

Anything over 30 inches needs a 36-inch guard and, in practice, stairs. A deck a story up adds $8–$28 a square foot for 6 × 6 posts, a bigger beam, bracing and deeper footings — $6,200–$15,750 for a 12 × 16 in Arlington before the stairs.

Railing and stairs

Wood railing is $24–$56 a linear foot, aluminum $44–$115, composite $58–$160 and cable $98–$215. A flight of stairs with a handrail is $480–$1,850. Together they can be a third of the bill on a small deck.

Local rules and permits

Texas has no state license for general or deck contractors and no dollar limit, but most cities require contractors to register before pulling a permit, and an attached deck needs one.

Labor rates in Arlington

Carpenters in the Dallas-Fort Worth-Arlington, TX metro earn a median $48,740 a year in federal wage data, about 20% below the US median. Labor is about half of a wood deck, so Arlington prices land about 6% below the US typical of $7,500 for a 12 × 16.

Season and site

Spring and early summer are the busy months, when quotes run highest and good builders book out weeks ahead; fall and winter work can be 5–15% cheaper where the ground allows digging. A sloped yard, rock, tree roots or a backyard the crew can only reach through a gate adds 10–20% to labor.

How to Save Money on a Deck in Arlington
  1. Keep it a rectangle, keep it low.A ground-hugging 12 × 16 rectangle is the cheapest deck in Arlington at $4,650–$10,350. Every angle, level change and foot of height adds cutting, posts and railing.
  2. Go bigger per square foot, not smaller.Footings, the ledger, the permit and setup cost about the same at any size, so a 20 × 20 ($34 a square foot) costs less per foot than a 12 × 16 ($37). Build the size you will actually use once.
  3. Book the off-season.Deck builders in Arlington are busiest from spring to early summer. Fall and winter slots, where the ground allows digging, run 5–15% cheaper and the deck is ready for the first warm weekend.
  4. Spend on the boards, save on the rail.Composite boards with an aluminum railing ($44–$115 a linear foot) cost less than matching composite rails ($58–$160) and look sharper. Wood railing ($24–$56) is cheapest but needs the most upkeep.
  5. Do the demolition and staining yourself.Tearing out an old deck is $565–$2,250 in Arlington and mostly labor and dump fees; cleaning and staining a new wood deck is $330–$905 every two or three years. Both are weekend jobs for a homeowner with a truck.
  6. Get the footings and hardware in writing.Two quotes can be $2,400 apart on the same deck because one uses precast blocks instead of $145–$370 poured footings, or nails instead of structural screws and hangers. Make both quotes name the footing type, depth and hardware.
Deck Cost in Arlington: What the Quote Should Include

Arlington deck builders quote by the job, usually from a drawing. Before you pay a deposit, get these in writing:

  • The finished deck size and height off the ground, with a sketch showing stairs and railing runs
  • Decking named by species or brand and line (5/4 treated pine, cedar, Trex Enhance, TimberTech Prime+), with the fastener type
  • The frame: joist size and spacing, beam size, post size, and how the ledger is bolted and flashed to the house
  • Footings: type, number and depth, and who digs if rock or roots turn up
  • Railing material, height and style, and stairs as their own line with the number of steps
  • Who pulls the permit, its cost, and that the price includes passing the inspections
  • Old deck removal and disposal as its own line
  • Start and finish dates, payment stages, the workmanship warranty, the board maker's warranty, and the builder's license or registration number and insurance
Frequently asked questions — Deck cost in Arlington
How much does it cost to build a deck in Arlington?

$4,650–$10,350 for a 12 × 16 pressure-treated deck attached to the house with railing, and $7,050 is typical. In composite the same deck is $8,250–$16,650.

How much is a deck per square foot in Arlington?

$24–$52 a square foot installed for treated wood, $29–$57 for cedar or redwood, $39–$76 for composite and $44–$86 for PVC. A deck a story up adds $8–$28 a square foot.

How much does a Trex or composite deck cost in Arlington?

$8,250–$16,650 for a 12 × 16 with composite railing, or $39–$76 a square foot installed. That is about $4,850 more than treated wood on a 12 × 16, with no staining afterward.

How much does a 20 × 20 deck cost in Arlington?

$9,150–$19,750 in pressure-treated wood with railing, and about $15,600–$30,400 in composite. A 16 × 20 is $7,250–$16,450.

Do I need a permit to build a deck in Arlington?

Almost always for an attached deck. Under the model code, only a deck of 200 sq ft or less, under 30 inches off the ground, not attached to the house and not at an exit door is exempt. A permit here runs $98–$770 and the builder normally pulls it. Texas has no state license for general or deck contractors and no dollar limit, but most cities require contractors to register before pulling a permit, and an attached deck needs one.

How much does it cost to replace a deck in Arlington?

$5,215–$12,600 for a 12 × 16 in treated wood: $565–$2,250 to tear out and haul away the old one, plus the new deck. In composite it is $8,815–$18,900.

How much do deck stairs and railing cost in Arlington?

A flight of 4–6 steps with handrail is $480–$1,850. Railing is $24–$56 a linear foot in treated wood, $44–$115 in aluminum, $58–$160 in composite and $98–$215 in cable; a 12 × 16 attached deck has about 40 ft.

How much does it cost to stain or repair a deck in Arlington?

Cleaning and staining a 12 × 16 deck is $330–$905; sanding and refinishing $565–$1,650. Small repairs — a few boards, a loose railing — run $285–$2,300, and a safety inspection $120–$405.

How long does it take to build a deck?

Three to five working days for a 12 × 16 deck on a one-story house once the permit is in hand, plus a day or two for the footing inspection to be scheduled. An elevated deck with stairs takes one to two weeks. Permit review adds anywhere from a day to several weeks depending on the city.

What's included in an Arlington deck quote?

Footings, the treated frame, decking, a 36-inch railing, hardware and cleanup. Often extra: stairs ($480–$1,850), the permit ($98–$770), tear-out of the old deck ($565–$2,250) and any railing upgrade.

Prices verified November 2026 · Cross-referenced against 18+ American pricing sources · See methodology

Prices for the Arlington metro area, November 2026. Outer suburbs may vary.

Our methodology
These are independent estimates built from public cost guides, manufacturer and lumber-yard prices, dated local price pages, city permit schedules and federal wage data. No deck builder can pay to change them, so always get two or three quotes. Last reviewed November 2026. Read our full methodology →

Get a fair deck quote in Arlington

Local deck builders · Free quotes · No obligation, no spam.

Get quotes in Arlington →Max 2 deck builders will contact you
Get quotes in ArlingtonMax 2 deck builders · free · no spam→