Stucco vs vinyl vs fiber cement siding: cost per square foot compared
By Our research team · Last verified · Methodology
Three-coat stucco
Most homes. Scratch, brown and finish coats about 7/8 inch thick over paper and metal lath. Lasts 50 years or more and takes paint or color coat well.
Vinyl siding
The cheapest cladding to install. Lasts 20–40 years, no painting, but it fades, cracks in hail and melts near heat.
Fiber cement
Wet and freeze-thaw climates where stucco struggles. A long-life cladding that needs repainting on about the same cycle as stucco.
Three-coat stucco runs $6–$13 per sq ft, vinyl siding runs $3–$11 per sq ft and fiber cement runs $7–$14 per sq ft in the US (November 2026). Three-coat stucco at $8.50 per sq ft typical suits most homes. See prices for your city ↓
Prices verified November 2026 · Cross-referenced against 98+ American pricing sources · See methodology
Three-Coat, One-Coat, EIFS and Finishes: Stucco Costs by System
Traditional three-coat stucco costs $6–$13 per sq ft installed. One-coat is a little less, synthetic (EIFS) more, and a re-dash or color coat over sound stucco far less. Vinyl and fiber cement are shown for comparison.
| Stucco system | Cost | Best for |
|---|---|---|
| Traditional three-coat stucco | $6–$13 per sq ft | Most homes. Scratch, brown and finish coats about 7/8 inch thick over paper and metal lath. Lasts 50 years or more and takes paint or color coat well. |
| One-coat (fiber-reinforced) system | $5–$10 per sq ft | Faster, thinner (about 3/8 to 1/2 inch) base over foam or paper, then a finish. Common on tract homes in the Southwest; less forgiving of poor flashing. |
| Synthetic stucco (EIFS) | $8–$18 per sq ft | Foam board, mesh and an acrylic finish. Best insulation and crack resistance, but repairs cost two to four times as much and it needs a drainage layer and careful flashing. |
| Acrylic finish or color coat | $1.50–$5 per sq ft | Sound stucco that just looks tired. Colored acrylic or cement finish bonded to the old surface; no repainting for 15–20 years. |
| Re-dash or resurface | $3–$7 per sq ft | Hairline-cracked or patched walls with a dry wall behind them. New base and finish coat over the old stucco, keeping the lath and paper. |
| Smooth (Santa Barbara) finish, three-coat | $7–$19 per sq ft | The high-end look, $1–$6 per sq ft more than a dash or lace texture. Slower, more skilled troweling, and it shows hairline cracks more. |
| Stucco over brick or block | $5–$10 per sq ft | Masonry homes, Florida block houses and chimneys. Often two coats bonded straight to the masonry, no lath, so it costs less per square foot. |
| Painted stucco (elastomeric or acrylic paint) | $1.50–$4 per sq ft | Refreshing color every 7–15 years. Elastomeric bridges hairline cracks; acrylic breathes better. |
| Venetian plaster (interior) | $10–$30 per sq ft | Polished interior walls and accent walls. Several thin lime or acrylic coats burnished to a marble-like sheen. |
| Vinyl siding (for comparison) | $3–$11 per sq ft | The cheapest cladding to install. Lasts 20–40 years, no painting, but it fades, cracks in hail and melts near heat. |
| Fiber cement siding (for comparison) | $7–$14 per sq ft | Wet and freeze-thaw climates where stucco struggles. A long-life cladding that needs repainting on about the same cycle as stucco. |
Which one: three-coat for most framed homes ($8.50 per sq ft typical), direct-applied stucco on block homes ($7), EIFS where insulation and crack resistance matter and the budget allows ($12). If your stucco is sound, skip all three and re-dash ($4.50) or color-coat ($3) instead.
Traditional Stucco vs Synthetic (EIFS) vs Fiber Cement Siding
Three-coat stucco at $8.50 per sq ft typical suits most homes. EIFS at $12 insulates best; fiber cement at $10 is the safer pick in wet, freeze-thaw climates.
| Factor | Traditional three-coat stucco | Synthetic stucco (EIFS) | Fiber cement siding |
|---|---|---|---|
| Installed price per sq ft | $6–$13 | $8–$18 | $7–$14 |
| 2,000 sq ft home | $12,000–$26,000 | $16,000–$36,000 | $14,000–$28,000 |
| Lifespan | 50–100 years | Decades if the drainage layer and flashing are right; 1990s barrier systems failed early | Long-life; makers back it with multi-decade warranties |
| Upkeep | Paint every 7–15 years or color coat every 15–20; seal cracks | Wash; recoat finish every 15–20 years | Repaint every 7–15 years; re-caulk joints |
| Repair cost | $8–$30 per sq ft for cracks | $30–$50 per sq ft | Replace planks; moderate |
| Best when | Dry and mild climates; block homes; matching the neighborhood | New builds wanting insulation; crack-prone soils | Wet or freeze-thaw climates; wood-sided neighborhoods |
| Watch out for | Missing weep screed or second paper layer; painting too soon | Barrier EIFS with no drainage; insurer questions; costly repairs | Unpainted cut edges; cheap installers skipping flashing |
Removal is the swing cost when you switch: $1–$3 per sq ft to strip siding before stucco, $1.50–$6 to strip stucco before siding. The guides we checked put stucco's resale return near 70%, in the same band as siding replacement.
Stucco vs siding: prices in the largest US cities
Local installed prices for each option, November 2026. Open a city for its full price list and a free quote.
| City | Three-coat stucco | Vinyl siding | Fiber cement |
|---|---|---|---|
| New York, NY | $11–$23.50 per sq ft | $4.50–$16.50 per sq ft | $10.50–$21 per sq ft |
| Los Angeles, CA | $7.25–$16 per sq ft | $3.50–$12.50 per sq ft | $8–$16 per sq ft |
| Chicago, IL | $7.50–$16.50 per sq ft | $3.50–$12.50 per sq ft | $8–$16 per sq ft |
| Dallas, TX | $5.50–$12 per sq ft | $2.75–$10.50 per sq ft | $6.75–$13.50 per sq ft |
| Houston, TX | $5.50–$12 per sq ft | $2.75–$10.50 per sq ft | $6.50–$13 per sq ft |
| Washington, DC | $6.50–$14.50 per sq ft | $3.25–$11.50 per sq ft | $7.50–$15 per sq ft |
| Atlanta, GA | $5.75–$12.50 per sq ft | $3–$10.50 per sq ft | $6.75–$13.50 per sq ft |
| Philadelphia, PA | $6.50–$14 per sq ft | $3.25–$11.50 per sq ft | $7.25–$14.50 per sq ft |
| Miami, FL | $5.50–$12 per sq ft | $3–$10.50 per sq ft | $6.75–$13.50 per sq ft |
| Phoenix, AZ | $5.75–$12.50 per sq ft | $3–$10.50 per sq ft | $6.75–$13.50 per sq ft |
| Boston, MA | $6–$13 per sq ft | $3–$11 per sq ft | $7–$14 per sq ft |
| San Francisco, CA | $8–$17 per sq ft | $3.50–$13 per sq ft | $8.25–$16.50 per sq ft |
| Riverside, CA | $5.75–$12.50 per sq ft | $3–$10.50 per sq ft | $6.75–$13.50 per sq ft |
| Detroit, MI | $6.50–$14 per sq ft | $3.25–$11.50 per sq ft | $7.25–$14.50 per sq ft |
| Seattle, WA | $6.25–$13.50 per sq ft | $3–$11.50 per sq ft | $7.25–$14.50 per sq ft |
| Minneapolis, MN | $6.25–$13.50 per sq ft | $3–$11 per sq ft | $7–$14 per sq ft |
| San Diego, CA | $6.50–$14 per sq ft | $3.25–$11.50 per sq ft | $7.25–$14.50 per sq ft |
| Tampa, FL | $5.50–$12 per sq ft | $2.75–$10.50 per sq ft | $6.75–$13.50 per sq ft |
| Orange County, CA | $6–$13 per sq ft | $3–$11 per sq ft | $7–$14 per sq ft |
| Denver, CO | $6–$13 per sq ft | $3–$11 per sq ft | $7–$14 per sq ft |
| Oakland, CA | $6.75–$14.50 per sq ft | $3.25–$11.50 per sq ft | $7.50–$15 per sq ft |
| Charlotte, NC | $6–$13 per sq ft | $3–$11 per sq ft | $7–$14 per sq ft |
| Baltimore, MD | $5.75–$12.50 per sq ft | $3–$10.50 per sq ft | $6.75–$13.50 per sq ft |
| St. Louis, MO | $7–$15.50 per sq ft | $3.25–$12 per sq ft | $7.75–$15.50 per sq ft |
| Orlando, FL | $5–$11 per sq ft | $2.75–$10 per sq ft | $6.25–$12.50 per sq ft |
Get two real stucco quotes
Local licensed pros · free · max 2 will contact you · no spam.
- New York, NY →$21,750–$47,100 per 2,000 sq ft
- Los Angeles, CA →$14,750–$31,950 per 2,000 sq ft
- Chicago, IL →$15,100–$32,750 per 2,000 sq ft
- Dallas, TX →$11,100–$24,050 per 2,000 sq ft
- Houston, TX →$10,950–$23,650 per 2,000 sq ft
- Washington, DC →$13,150–$28,550 per 2,000 sq ft
- Atlanta, GA →$11,450–$24,750 per 2,000 sq ft
- Philadelphia, PA →$13,050–$28,300 per 2,000 sq ft
- Stucco cost: full US guide →