Skip to content
Independent United States Cost GuidesPrices verified November 2026 · 39 trades · 195 US cities · 221+ sources For pros →
Get a fair quote

Cost guides

Plumbing & water4 trades
Electrical & energy5 trades
Renovation8 trades
Structural7 trades
Outdoor & yard7 trades
Cleaning & maintenance8 trades

More

Get a fair quote
Cost guide

How much does stucco cost in Richmond?

By Our research team · Last verified · Methodology

Updated November 2026Independently researched11 min read
Stucco cost

Stucco costs in Richmond

Richmond, VAChange location
Get free quotesFree · no obligation · max 2 pros
Normal range for Richmond, VA
$11,900–$25,750per 2,000 sq ft

Stuccoing a 2,000 sq ft home in Richmond costs $11,900–$25,750 for a traditional three-coat system, labor and materials, with $16,850 the typical bill. That is $6–$13 per square foot of wall; a re-dash over sound stucco runs $3–$7.

How we get this data
Typical
$16,850
Low end
$7,950
High end
$37,650
2,000 sq ft home
$11,900–$25,750
Three-coat per sq ft
$6–$13
Small repair
$250–$895
Paint 2,000 sq ft
$3,000–$8,000

Want an exact price for your job?

Tell us the job. Casey checks it by text, then up to 2 local stucco contractors send you a real quote. Free, no obligation.

Get my fair quote →
Typical stucco price: Richmond vs nearby citiesTypical price, per 2,000 sq ft. The line marks the US typical.
Washington, DC $18,650
Richmond, VAThis guide $16,850
Durham, NC $16,600
Norfolk, VA $16,350
Baltimore, MD $16,150
Greenville, NC $15,600

The typical Richmond price is $16,850, in line with the US typical of $17,000.

Where Richmond sits among 195 US metrosNumber of metros at each typical stucco price, per 2,000 sq ft.

Richmond's price band

Richmond is pricier than 62% of the 195 US metros we price for stucco work.

Expect $6–$13 per sq ft for three-coat stucco in Richmond, $1.50–$5 for an acrylic color coat over sound walls, $1.50–$4 to paint, and $15–$50 per sq ft to tear out and remediate water-damaged stucco. A moisture inspection alone is $395–$1,500.

Richmond is a large metro with mid-range stucco prices. A three-coat job here is in line with the US typical of $17,000 for a 2,000 sq ft home, and most of the gap is labor: cement, sand, lath and paper cost about the same everywhere.

In Richmond's humid climate the details matter more than the coats: a weep screed at the bottom, kickout flashing where roofs meet walls, and sealed window edges. Ask every bidder to list those items; they are what keeps water out of the wall.

Comparing cities, or after the US-wide picture? See the national guide: Stucco cost in the USA.

Quick answer

$11,900–$25,750 to stucco a 2,000 sq ft home in Richmond with a traditional three-coat system, labor and materials — typically $16,850. That works out to $6–$13 per sq ft; a small repair is $250–$895 and painting $1.50–$4 per sq ft. Verified November 2026. Get free Richmond quotes →

  • Stucco a 2,000 sq ft home: $11,900–$25,750 ($16,850 typical)
  • Three-coat $6–$13 per sq ft; one-coat $5–$10; EIFS $8–$18
  • Small repair $250–$895; re-dash $3–$7 per sq ft; remediation $15–$50
  • Paint $1.50–$4 per sq ft; color coat $1.50–$5; inspection $395–$1,500
  • Priciest area to work in: Downtown, Jackson Ward & Scott's Addition; lowest quotes: Chesterfield & the suburbs

Prices verified November 2026 · Cross-referenced against 98+ American pricing sources · See methodology

Detailed pricing — Stucco cost in Richmond 2026

Installed prices with labor and materials; whole-home rows assume about 2,000 sq ft of wall for a 2,000 sq ft home. Richmond metro, re-verified November 2026.

ServiceLowTypicalHigh
Stucco a 2,000 sq ft home, traditional three-coat, installedper 2,000 sq ft$11,900per 2,000 sq ft$16,850$25,750
Stucco a 1,500 sq ft single-story home, three-coatper home$8,900per home$12,650$19,350
Stucco a 3,000 sq ft two-story home, three-coat, with scaffoldingper home$19,050per home$28,250$44,600
Traditional three-coat stucco (per sq ft of wall)per sq ft$6per sq ft$8.50$13
One-coat (fiber-reinforced) stucco systemper sq ft$5per sq ft$7$10
Synthetic stucco (EIFS) with foam insulation boardper sq ft$8per sq ft$12$18
Acrylic finish or color coat over sound stuccoper sq ft$1.50per sq ft$3$5
Re-dash or resurface existing stucco (new base and finish coat)per sq ft$3per sq ft$4.50$7
Paint stucco exterior, two coatsper sq ft$1.50per sq ft$2.50$4
Remove old stucco down to the sheathingper sq ft$1.50per sq ft$3$6
Remove old siding before stuccoper sq ft$1per sq ft$1.50$3
Lath, two layers of building paper and weep screed, installedper sq ft$1.50per sq ft$2.25$3.50
Stucco over brick or concrete blockper sq ft$5per sq ft$7$10
Crack repair and patching (per sq ft of repair)per sq ft$8per sq ft$15$30
Small repair: hairline cracks or one hole, under 10 sq ftper job$250per job$495$895
Replace a damaged section, 50–200 sq ftper job$2,500per job$3,950$5,950
Water-damage remediation: tear off, fix sheathing, re-lath, re-stuccoper sq ft$15per sq ft$30$50
Stucco moisture inspection with probe testingper inspection$395per inspection$845$1,500
Scaffolding for a two-story home (rent, set up, take down)per job$1,200per job$3,000$5,950
Stucco mason labor/hr$45/hr$65$95
Venetian plaster, interior wallsper sq ft$10per sq ft$18$30
Interior plaster or stucco accent wall, about 100 sq ftper wall$990per wall$1,800$3,000
Building permit for new stucco or re-lath (where required)per permit$100per permit$300$500
Bigger stucco jobs in Richmond: what they costPer sq ft, low to high with the typical price marked. Every line is in the table above.
Water-damage remediation: tear off, fix sheathing, re-lath, re-stucco $30$15–$50
Venetian plaster, interior walls $18$10–$30
Crack repair and patching (per sq ft of repair) $15$8–$30
Synthetic stucco (EIFS) with foam insulation board $12$8–$18
Traditional three-coat stucco (per sq ft of wall) $8$6–$13
One-coat (fiber-reinforced) stucco system $7$5–$10
Stucco over brick or concrete block $7$5–$10
Re-dash or resurface existing stucco (new base and finish coat) $4$3–$7
Smaller stucco jobs and repairs in RichmondPer sq ft, low to high with the typical price marked. Every line is in the table above.
Acrylic finish or color coat over sound stucco $3$2–$5
Remove old stucco down to the sheathing $3$2–$6
Paint stucco exterior, two coats $2$2–$4
Lath, two layers of building paper and weep screed, installed $2$2–$4
Already got a quote?
Check it against these Richmond prices — free, no sign-up.
$

Got it as a PDF or photo? Upload up to 3 quotes and compare →

Free quotes

Get free quotes from up to 2 local stucco contractors in Richmond

Free · No obligation · About a minute

  1. 1The job
  2. 2Budget
  3. 3Your details
Casey · LocalGoingRate

What do you need a price on?

Tap one to start.

Prices verified November 2026 · Cross-referenced against 98+ American pricing sources · See methodology

Prices cover the Richmond metro. Outlying towns can run 5–10% lower; older homes in Downtown, Jackson Ward & Scott's Addition sit at the top of each range.

How stucco costs vary across Richmond

Stucco prices across Richmond

Where you live in the metro changes the labor and the access, not the materials. Older homes in Downtown, Jackson Ward & Scott's Addition take the longest; jobs in Chesterfield & the suburbs tend to come in at or under the city typical.

Stucco prices across RichmondTypical range by part of the metro, per 2,000 sq ft. The line marks the Richmond typical.
Downtown, Jackson Ward & Scott's Addition10–15% above the city average $12.8K–$28.9Kper 2,000 sq ft
Southside & ManchesterStandard to 5% above $12.2K–$27.3Kper 2,000 sq ft
Northside & HenricoStandard pricing $11.9K–$25.8Kper 2,000 sq ft
Chesterfield & the suburbsStandard; bigger two-story homes $11.9K–$27.1Kper 2,000 sq ft

Downtown, Jackson Ward & Scott's Addition

10–15% above the city average
Downtown, Jackson Ward, Scott's Addition, Church Hill
Three-coat, 2,000 sq ft
$12,850–$28,850 per 2,000 sq ft
Small repair
$455–$640 / small repair

The priciest part of the metro for exterior work: narrow side yards, permit parking and historic-review streets add days. Expect quotes at the top of each range.

Southside & Manchester

Standard to 5% above
Manchester, Southside, Midlothian
Three-coat, 2,000 sq ft
$12,250–$27,300 per 2,000 sq ft
Small repair
$435–$605 / small repair

Older homes next to new builds. Re-dash and color-coat jobs price at the standard rate; tear-off jobs on pre-1960s homes run higher.

Northside & Henrico

Standard pricing
Northside, Highland Park, Henrico
Three-coat, 2,000 sq ft
$11,900–$25,750 per 2,000 sq ft
Small repair
$420–$570 / small repair

Established neighborhoods with single-story and two-story homes. Most jobs here price at the city's going rate.

Chesterfield & the suburbs

Standard; bigger two-story homes
Chesterfield, Short Pump, Petersburg
Three-coat, 2,000 sq ft
$11,900–$27,050 per 2,000 sq ft
Small repair
$420–$600 / small repair

Newer tract homes with stucco already on them. Color coats, re-dash and repair work are the common jobs; two-story homes need scaffolding.

What you'll actually pay — job by job

Real-World Stucco Costs in Richmond

Here's what common stucco jobs cost in Richmond in 2026, labor, paper, lath and three coats on a 2,000 sq ft home.

Stucco a 2,000 sq ft single-story home, three-coat — 2–3 weeks

$11,900–$16,850

Paper and lath, then scratch, brown and finish coats with a lace or sand texture. Most Richmond jobs land here; a smooth finish or lots of windows and corners can reach $25,750.

Patch a hole and a few cracks — half a day

$250–$895

Cut back loose stucco, patch the paper, re-mesh and float in a matching texture. One hole alone is $250–$445; cracks run $8–$30 per sq ft of repair. Expect a visible patch until the wall is painted or color-coated.

Re-dash a tired but dry 2,000 sq ft house — 3–5 days

$6,000–$14,000

A bonding coat and new finish over the old stucco, keeping the lath and paper. At $3–$7 per sq ft it is the cheapest way to make old stucco look new. An acrylic color coat instead runs $3,000–$10,000.

Water damage under a window, 100 sq ft remediated

$1,500–$5,000

Tear off the stucco, replace rotted sheathing, new paper, flashing and lath, then three coats. $15–$50 per sq ft; a moisture inspection first ($395–$1,500) tells you how far it has spread.

Tear off and re-stucco a 2,000 sq ft home — 3–4 weeks

$14,900–$37,750

Removal ($1.50–$6 per sq ft) plus a full three-coat system. Only worth it when the paper or lath has failed across the house; a two-story home adds scaffolding at $1,200–$5,950.

How much does stucco cost in Richmond?

A three-coat stucco job on a 2,000 sq ft Richmond home costs $11,900 to $25,750. The middle of the market, about $16,850, buys scratch, brown and finish coats over new paper and lath with a standard texture. Smooth finishes and two-story scaffolding cost more.

Smaller jobs cost less. A re-dash over sound stucco is $6,000–$14,000 on the same house, an acrylic color coat $3,000–$10,000, and painting $3,000–$8,000. Prices re-checked against 98 sources in November 2026.

Stucco prices in Richmond (2026): per square foot and per home

Three-coat stucco costs $6–$13 per sq ft installed, a re-dash $3–$7, and painting $1.50–$4. Whole-home figures below are for about 2,000 sq ft of wall.

Line on the quoteLowTypicalHigh
Traditional three-coat stucco (per sq ft of wall)$6$8.50$13
One-coat (fiber-reinforced) stucco system (per sq ft)$5$7$10
Synthetic stucco (EIFS) with foam insulation board (per sq ft)$8$12$18
Re-dash existing stucco, per sq ft$3$4.50$7
Acrylic color coat, per sq ft$1.50$3$5
Paint a 2,000 sq ft stucco home$3,000$5,000$8,000
Small repair: hairline cracks or one hole, under 10 sq ft$250$495$895
Remediate water damage, per sq ft$15$30$50

Repair or re-stucco in Richmond: a $495 patch or a $9,000 re-dash fixes most tired walls. A full three-coat job at $16,850 only pays when the paper or lath behind the stucco has failed.

What moves a stucco quote in Richmond:

  • System — three-coat $6–$13 per sq ft; one-coat $5–$10; synthetic (EIFS) $8–$18.
  • Stories and access — a two-story home adds scaffolding at $1,200–$5,950 and slower work at height.
  • What is under the old stucco — tear-off ($1.50–$6 per sq ft) and water-damage remediation ($15–$50) are where quotes grow.
  • Finish — smooth (Santa Barbara) finishes add $1–$6 per sq ft over a lace or dash texture.
  • Painting or color coat — $1.50–$4 per sq ft to paint; $1.50–$5 for an acrylic color coat that needs no paint for years.

Ask every Richmond bidder for the same six things: the measured wall area, the system (three-coat, one-coat or EIFS) and its thickness, the paper and lath spec, how the finish coat is colored, scaffolding and permit as separate lines, and the warranty. Compare those, not the headline price. Get a quote for your stucco job →

Stucco Cost in Richmond by Home Size

Quick answer

1,500 sq ft single-story: $8,900–$19,350. 2,000 sq ft: $11,900–$25,750. 3,000 sq ft two-story, scaffolding included: $19,050–$44,600. All three-coat, installed.

Worked example: a Richmond 2,000 sq ft single-story home with sound stucco that looks tired. A re-dash at $9,000 plus a few crack repairs at $495 comes to about $9,495, with no paint needed if the finish is colored.

The same house with failed paper under two walls: remediating 300 sq ft at $9,000 plus a re-dash of the rest to blend the look ($7,650) is about $16,650. Tearing everything off and starting again would be $22,850.

Richmond Stucco Costs by System and Finish

Stucco systemCostBest for
Traditional three-coat stucco$6–$13 per sq ftMost homes. Scratch, brown and finish coats about 7/8 inch thick over paper and metal lath. Lasts 50 years or more and takes paint or color coat well.
One-coat (fiber-reinforced) system$5–$10 per sq ftFaster, thinner (about 3/8 to 1/2 inch) base over foam or paper, then a finish. Common on tract homes in the Southwest; less forgiving of poor flashing.
Synthetic stucco (EIFS)$8–$18 per sq ftFoam board, mesh and an acrylic finish. Best insulation and crack resistance, but repairs cost two to four times as much and it needs a drainage layer and careful flashing.
Acrylic finish or color coat$1.50–$5 per sq ftSound stucco that just looks tired. Colored acrylic or cement finish bonded to the old surface; no repainting for 15–20 years.
Re-dash or resurface$3–$7 per sq ftHairline-cracked or patched walls with a dry wall behind them. New base and finish coat over the old stucco, keeping the lath and paper.
Smooth (Santa Barbara) finish, three-coat$7–$19 per sq ftThe high-end look, $1–$6 per sq ft more than a dash or lace texture. Slower, more skilled troweling, and it shows hairline cracks more.
Stucco over brick or block$5–$10 per sq ftMasonry homes, Florida block houses and chimneys. Often two coats bonded straight to the masonry, no lath, so it costs less per square foot.
Painted stucco (elastomeric or acrylic paint)$1.50–$4 per sq ftRefreshing color every 7–15 years. Elastomeric bridges hairline cracks; acrylic breathes better.
Venetian plaster (interior)$10–$30 per sq ftPolished interior walls and accent walls. Several thin lime or acrylic coats burnished to a marble-like sheen.
Vinyl siding (for comparison)$3–$11 per sq ftThe cheapest cladding to install. Lasts 20–40 years, no painting, but it fades, cracks in hail and melts near heat.
Fiber cement siding (for comparison)$7–$14 per sq ftWet and freeze-thaw climates where stucco struggles. A long-life cladding that needs repainting on about the same cycle as stucco.
Cost by stucco system in RichmondTypical range, per sq ft.
Traditional three-coat stucco $6–$13per sq ft
One-coat (fiber-reinforced) system $5–$10per sq ft
Synthetic stucco (EIFS) $8–$18per sq ft
Acrylic finish or color coat $2–$5per sq ft
Re-dash or resurface $3–$7per sq ft
Smooth (Santa Barbara) finish, three-coat $7–$19per sq ft
Stucco over brick or block $5–$10per sq ft
Painted stucco (elastomeric or acrylic paint) $2–$4per sq ft
Venetian plaster (interior) $10–$30per sq ft
Vinyl siding (for comparison) $3–$11per sq ft
Fiber cement siding (for comparison) $7–$14per sq ft
Richmond tip: if a quote is far under $11,900 for a whole house, check for the paper and lath lines. Skipping the second layer of paper or the weep screed is how cheap stucco fails in five years.

Material cost vs. what you pay — the Richmond stucco bill

Cement, sand, lath and paper for a 2,000 sq ft home cost about $4,000–$8,000, and a bag of base coat is under $30. The installed price in Richmond, $11,900–$25,750, pays for a crew of plasterers for one to three weeks, three separate coats with curing time between them, scaffolding, cleanup and a warranty on the work.

Labor is the part that moves with the city. Richmond is a large metro with mid-range stucco prices, so a three-coat job here is in line with the US typical of $17,000. Stucco crews bill $45–$95 an hour when they bill by the hour, but almost every whole-house job is quoted by the square foot of wall.

What's included in a Richmond stucco quote (and what costs extra)

A standard three-coat price covers paper, lath, weep screed, corner beads, the three coats, a standard texture and cleanup. The headline price often leaves out:

  • Scaffolding — $1,200–$5,950 on a two-story home, often a separate line
  • Tear-off of old stucco or siding — $1.50–$6 per sq ft for stucco, $1–$3 for siding, plus disposal
  • Painting or color coat — $1.50–$4 per sq ft to paint; $1.50–$5 for an acrylic color coat
  • Permit and inspection — $100–$500 where the city requires one for new stucco or re-lathing

Ask how long the warranty on the work lasts and whether it covers cracking; good companies put it in writing.

What Affects Stucco Costs in Richmond

Three-coat, one-coat or synthetic

Three-coat stucco costs $6–$13 per sq ft in Richmond; a one-coat system $5–$10; synthetic stucco (EIFS) $8–$18. EIFS insulates best but costs the most to repair.

Wall area, not floor area

A 2,000 sq ft single-story home has roughly 2,000 sq ft of wall; a two-story home of the same floor area has far more. The 1,500 sq ft home in the table runs $8,900–$19,350; a 3,000 sq ft two-story home $19,050–$44,600 with scaffolding.

What is behind the old stucco

A re-dash over sound stucco is $3–$7 per sq ft. If the paper or lath has failed, tear-off ($1.50–$6) and remediation ($15–$50 per sq ft) apply, and the quote can double.

Finish and texture

Dash, lace and sand finishes are the standard price. A smooth Santa Barbara finish adds $1–$6 per sq ft and shows hairline cracks more. Integral color in the finish coat saves the $1.50–$4 per sq ft paint job.

Local rules

Most cities need a building permit for new stucco or re-lathing ($100–$500) but not for patching. Ask your Richmond contractor who pulls it and whether the inspection is included.

Labor rates in Richmond

Labor is most of the bill. Richmond is a large metro with mid-range stucco prices, so a three-coat job is in line with the US typical of $17,000. Crews bill about $45–$95 an hour; a whole house is quoted by the square foot.

Season and weather

Cement coats need 40–90°F and 48 hours of misting after the brown coat, then about a week before the finish. Rain, frost or desert heat stretch a Richmond job, and many crews offer better prices in their slow months.

How to Save Money on Stucco in Richmond
  1. Re-dash instead of re-stucco.If the wall behind is dry, a new finish coat at $3–$7 per sq ft ($9,000 on 2,000 sq ft) costs far less than a full $16,850 three-coat job.
  2. Color the finish coat.Integral color or an acrylic color coat ($1.50–$5 per sq ft) means no $3,000–$8,000 paint job now and none for 15–20 years.
  3. Get the wall measured.Quotes should be per square foot of wall, measured on site, minus windows and doors. A quote off the home's floor area can be 10–30% high.
  4. Bundle the small jobs.A crew already on site patches cracks for far less than a separate $250–$895 call. Have every wall checked while the scaffolding is up.
  5. Book the slow season.Crews in Richmond quote lower when their calendar is thin. Spring and fall give the best curing weather; ask about off-peak dates.
  6. Inspect before you buy or sell.A $395–$1,500 moisture inspection finds hidden water damage before it becomes $15–$50-per-sq-ft remediation. Worth it on any stucco home built in the 1990s or 2000s.
Stucco Cost in Richmond: What the Quote Should Include

Richmond stucco companies often quote off a quick walk-around. Before you agree to the work, get these in writing:

  • The wall area measured on site, in square feet, with windows and doors taken out
  • The system: three-coat, one-coat or EIFS, and the finished thickness
  • Paper (two layers over wood sheathing), lath type, weep screed and corner beads
  • Flashing and kickouts at windows, doors and roof-to-wall joints
  • The finish texture and how it is colored: integral, color coat or paint
  • Scaffolding, tear-off, disposal and permit as separate lines
  • Curing: misting after the brown coat and the wait before the finish
  • Warranty on cracking and water intrusion, in years
Frequently asked questions — Stucco cost in Richmond
How much does it cost to stucco a house in Richmond?

$11,900–$25,750 for a 2,000 sq ft home with a traditional three-coat system, labor and materials, and $16,850 is typical. That is $6–$13 per sq ft of wall.

How much is stucco per square foot in Richmond?

$6–$13 per sq ft installed for three-coat stucco, $5–$10 for a one-coat system and $8–$18 for synthetic stucco (EIFS). A re-dash over sound stucco is $3–$7.

How much does stucco repair cost in Richmond?

$250–$895 for a small patch of cracks or one hole, about $495 typical. Replacing a 50–200 sq ft section is $2,500–$5,950; water-damage remediation $15–$50 per sq ft.

How much does it cost to paint a stucco house in Richmond?

$3,000–$8,000 for a 2,000 sq ft home, or $1.50–$4 per sq ft, two coats. An acrylic color coat instead runs $3,000–$10,000 and skips repainting for 15–20 years.

Can I stucco my house myself?

The materials are cheap ($4–$8 per sq ft with paper and lath) but three-coat stucco is a skilled, timed job: each coat has to go on wet-edge to wet-edge in one go and cure right. Most DIY jobs crack. Patching a small hole is a fair DIY task; a wall is not.

How much does it cost to re-stucco a house in Richmond?

$6,000–$14,000 to re-dash a 2,000 sq ft home over sound stucco. Tearing the old stucco off first and doing a full three-coat job is $14,900–$37,750.

Do I need a permit for stucco in Richmond?

Usually for new stucco or re-lathing, not for patching or a finish coat. Permits run about $100–$500; your contractor should pull it. Check with the city building department before work starts.

Should I repair or replace my stucco?

Repair it if the wall behind is dry: patches are $250–$895 and a re-dash $3–$7 per sq ft. Replace it when the paper or lath has failed, the stucco is hollow over large areas, or more than a quarter of a wall is damaged. Full replacement is $11,900–$25,750.

How long does stucco last?

50–100 years when installed right and kept sealed. Paint lasts 7–15 years; an acrylic color coat 15–20. Hairline cracks are normal; cracks you can fit a dime in need a look.

What's included in a Richmond stucco quote?

Paper, lath, weep screed, three coats, a standard texture and cleanup. Often extra: scaffolding ($1,200–$5,950), tear-off ($1.50–$6 per sq ft), painting or color coat, and the permit ($100–$500).

Prices verified November 2026 · Cross-referenced against 98+ American pricing sources · See methodology

Prices for the Richmond metro area, November 2026. Outer suburbs may vary.

Our methodology
These are independent estimates built from public cost guides, 2026 contractor and city price pages, manufacturer and material data, permit schedules and federal wage data. No stucco company can pay to change them, so always get a couple of quotes. Last reviewed November 2026. Read our full methodology →

Get a fair stucco quote in Richmond

Local stucco contractors · Free quotes · No obligation, no spam.

Get quotes in Richmond →Max 2 stucco contractors will contact you
Get quotes in RichmondMax 2 stucco contractors · free · no spam→