Skip to content
Independent United States Cost GuidesPrices verified November 2026 · 39 trades · 195 US cities · 221+ sources For pros →
Get a fair quote

Cost guides

Plumbing & water4 trades
Electrical & energy5 trades
Renovation8 trades
Structural7 trades
Outdoor & yard7 trades
Cleaning & maintenance8 trades

More

Get a fair quote
Cost guide

How much does stucco cost in Fresno?

By Our research team · Last verified · Methodology

Updated November 2026Independently researched12 min read
Stucco cost

Stucco costs in Fresno

Fresno, CAChange location
Get free quotesFree · no obligation · max 2 pros
Normal range for Fresno, CA
$12,100–$26,200per 2,000 sq ft

Stuccoing a 2,000 sq ft home in Fresno costs $12,100–$26,200 installed, three coats over paper and lath. Most homeowners here pay about $17,150. A small crack or hole repair is $250–$905; painting the whole house $3,000–$8,000.

How we get this data
Typical
$17,150
Low end
$8,050
High end
$38,300
2,000 sq ft home
$12,100–$26,200
Three-coat per sq ft
$6–$13
Small repair
$250–$905
Paint 2,000 sq ft
$3,000–$8,000

Want an exact price for your job?

Tell us the job. Casey checks it by text, then up to 2 local stucco contractors send you a real quote. Free, no obligation.

Get my fair quote →
Typical stucco price: Fresno vs nearby citiesTypical price, per 2,000 sq ft. The line marks the US typical.
San Jose, CA $19,100
Stockton, CA $17,200
Fresno, CAThis guide $17,150
Salinas, CA $16,900
Modesto, CA $16,850
Bakersfield, CA $16,500
Visalia, CA $14,750

The typical Fresno price is $17,150, in line with the US typical of $17,000.

Where Fresno sits among 195 US metrosNumber of metros at each typical stucco price, per 2,000 sq ft.

Fresno's price band

Fresno is pricier than 74% of the 195 US metros we price for stucco work.

Traditional three-coat stucco costs $6–$13 per square foot installed in Fresno, a one-coat system $5–$10, and synthetic stucco (EIFS) $8–$18. Re-dashing sound stucco is $3–$7 per sq ft, and a small crack or hole repair $250–$905.

Fresno plasterers earn a median $60,990, a little above the US figure for the trade, and stucco is the default cladding on Central Valley tract homes, so re-dash and color-coat crews compete hard for work. In California any stucco job of $1,000 or more, labor and materials together, needs a contractor licensed by the state board, normally with the C-35 lathing and plastering classification, and a re-stucco or re-lath job needs a building permit.

Prices on this page include labor, paper, lath and three coats unless the row says otherwise. Get three bids in Fresno, and ask each to measure the wall area on site; a quote worked off the home's floor area can run 10–30% high on a tall, narrow house.

Comparing cities, or after the US-wide picture? See the national guide: Stucco cost in the USA.

Quick answer

$12,100–$26,200 to stucco a 2,000 sq ft home in Fresno with a traditional three-coat system, labor and materials — typically $17,150. That works out to $6–$13 per sq ft; a small repair is $250–$905 and painting $1.50–$4 per sq ft. Verified November 2026. Get free Fresno quotes →

  • Stucco a 2,000 sq ft home: $12,100–$26,200 ($17,150 typical)
  • Three-coat $6–$13 per sq ft; one-coat $5–$10; EIFS $8–$18
  • Small repair $250–$905; re-dash $3–$7 per sq ft; remediation $15–$50
  • Paint $1.50–$4 per sq ft; color coat $1.50–$5; inspection $405–$1,500
  • Priciest area to work in: Downtown & Tower District; lowest quotes: Clovis & the north

Prices verified November 2026 · Cross-referenced against 98+ American pricing sources · See methodology

Detailed pricing — Stucco cost in Fresno 2026

Installed prices with labor and materials; whole-home rows assume about 2,000 sq ft of wall for a 2,000 sq ft home. Fresno metro, re-verified November 2026.

ServiceLowTypicalHigh
Stucco a 2,000 sq ft home, traditional three-coat, installedper 2,000 sq ft$12,100per 2,000 sq ft$17,150$26,200
Stucco a 1,500 sq ft single-story home, three-coatper home$9,050per home$12,850$19,650
Stucco a 3,000 sq ft two-story home, three-coat, with scaffoldingper home$19,350per home$28,750$45,350
Traditional three-coat stucco (per sq ft of wall)per sq ft$6per sq ft$8.50$13
One-coat (fiber-reinforced) stucco systemper sq ft$5per sq ft$7$10
Synthetic stucco (EIFS) with foam insulation boardper sq ft$8per sq ft$12$18
Acrylic finish or color coat over sound stuccoper sq ft$1.50per sq ft$3$5
Re-dash or resurface existing stucco (new base and finish coat)per sq ft$3per sq ft$4.50$7
Paint stucco exterior, two coatsper sq ft$1.50per sq ft$2.50$4
Remove old stucco down to the sheathingper sq ft$1.50per sq ft$3$6
Remove old siding before stuccoper sq ft$1per sq ft$1.50$3
Lath, two layers of building paper and weep screed, installedper sq ft$1.50per sq ft$2.25$3.50
Stucco over brick or concrete blockper sq ft$5per sq ft$7$10
Crack repair and patching (per sq ft of repair)per sq ft$8per sq ft$15$30
Small repair: hairline cracks or one hole, under 10 sq ftper job$250per job$505$905
Replace a damaged section, 50–200 sq ftper job$2,500per job$4,050$6,050
Water-damage remediation: tear off, fix sheathing, re-lath, re-stuccoper sq ft$15per sq ft$30$50
Stucco moisture inspection with probe testingper inspection$405per inspection$855$1,500
Scaffolding for a two-story home (rent, set up, take down)per job$1,200per job$3,000$6,050
Stucco mason labor/hr$45/hr$65$95
Venetian plaster, interior wallsper sq ft$10per sq ft$18$30
Interior plaster or stucco accent wall, about 100 sq ftper wall$1,000per wall$1,800$3,000
Building permit for new stucco or re-lath (where required)per permit$100per permit$300$500
Bigger stucco jobs in Fresno: what they costPer sq ft, low to high with the typical price marked. Every line is in the table above.
Water-damage remediation: tear off, fix sheathing, re-lath, re-stucco $30$15–$50
Venetian plaster, interior walls $18$10–$30
Crack repair and patching (per sq ft of repair) $15$8–$30
Synthetic stucco (EIFS) with foam insulation board $12$8–$18
Traditional three-coat stucco (per sq ft of wall) $8$6–$13
One-coat (fiber-reinforced) stucco system $7$5–$10
Stucco over brick or concrete block $7$5–$10
Re-dash or resurface existing stucco (new base and finish coat) $4$3–$7
Smaller stucco jobs and repairs in FresnoPer sq ft, low to high with the typical price marked. Every line is in the table above.
Acrylic finish or color coat over sound stucco $3$2–$5
Remove old stucco down to the sheathing $3$2–$6
Paint stucco exterior, two coats $2$2–$4
Lath, two layers of building paper and weep screed, installed $2$2–$4
Already got a quote?
Check it against these Fresno prices — free, no sign-up.
$

Got it as a PDF or photo? Upload up to 3 quotes and compare →

Free quotes

Get free quotes from up to 2 local stucco contractors in Fresno

Free · No obligation · About a minute

  1. 1The job
  2. 2Budget
  3. 3Your details
Casey · LocalGoingRate

What do you need a price on?

Tap one to start.

Prices verified November 2026 · Cross-referenced against 98+ American pricing sources · See methodology

Figures are for the Fresno metro area. Trip fees can apply on the far edges; tight lots in Downtown & Tower District cost the most to work on.

How stucco costs vary across Fresno

Stucco prices across Fresno

Where you live in the metro changes the labor and the access, not the materials. Older homes in Downtown & Tower District take the longest; jobs in Clovis & the north tend to come in at or under the city typical.

Stucco prices across FresnoTypical range by part of the metro, per 2,000 sq ft. The line marks the Fresno typical.
Downtown & Tower District10–15% above the city average $13.1K–$29.4Kper 2,000 sq ft
Southwest & Southeast FresnoStandard to 5% above $12.4K–$27.8Kper 2,000 sq ft
Central & Northeast FresnoStandard pricing $12.1K–$26.2Kper 2,000 sq ft
Clovis & the northStandard; bigger two-story homes $12.1K–$27.5Kper 2,000 sq ft

Downtown & Tower District

10–15% above the city average
Downtown, Tower District, Chinatown
Three-coat, 2,000 sq ft
$13,050–$29,350 per 2,000 sq ft
Small repair
$465–$650 / small repair

Tight lots, street parking and older homes slow the crew. Many homes here have original stucco with decades of paint on it, so tear-off and lead-safe work add to the bill.

Southwest & Southeast Fresno

Standard to 5% above
Southwest Fresno, Southeast Fresno, Calwa
Three-coat, 2,000 sq ft
$12,450–$27,750 per 2,000 sq ft
Small repair
$440–$615 / small repair

A mix of older homes and new infill. Older stucco here often hides failed paper or rusted lath, so a repair quote can grow once the crew opens a wall.

Central & Northeast Fresno

Standard pricing
Central Fresno, Fresno High, Northeast
Three-coat, 2,000 sq ft
$12,100–$26,200 per 2,000 sq ft
Small repair
$430–$580 / small repair

Mostly houses with easy access. Quotes cluster around the city typical.

Clovis & the north

Standard; bigger two-story homes
Clovis, North Fresno, Madera
Three-coat, 2,000 sq ft
$12,100–$27,500 per 2,000 sq ft
Small repair
$430–$610 / small repair

Two-story homes are the norm here. Expect standard per-square-foot rates, but more square feet and a scaffolding line on the quote.

What you'll actually pay — job by job

Real-World Stucco Costs in Fresno

Here's what common stucco jobs cost in Fresno in 2026, labor, paper, lath and three coats on a 2,000 sq ft home.

Stucco a 2,000 sq ft single-story home, three-coat — 2–3 weeks

$12,100–$17,150

Paper and lath, then scratch, brown and finish coats with a lace or sand texture. Most Fresno jobs land here; a smooth finish or lots of windows and corners can reach $26,200.

Patch a hole and a few cracks — half a day

$250–$905

Cut back loose stucco, patch the paper, re-mesh and float in a matching texture. One hole alone is $250–$455; cracks run $8–$30 per sq ft of repair. Expect a visible patch until the wall is painted or color-coated.

Re-dash a tired but dry 2,000 sq ft house — 3–5 days

$6,000–$14,000

A bonding coat and new finish over the old stucco, keeping the lath and paper. At $3–$7 per sq ft it is the cheapest way to make old stucco look new. An acrylic color coat instead runs $3,000–$10,000.

Water damage under a window, 100 sq ft remediated

$1,500–$5,000

Tear off the stucco, replace rotted sheathing, new paper, flashing and lath, then three coats. $15–$50 per sq ft; a moisture inspection first ($405–$1,500) tells you how far it has spread.

Tear off and re-stucco a 2,000 sq ft home — 3–4 weeks

$15,100–$38,200

Removal ($1.50–$6 per sq ft) plus a full three-coat system. Only worth it when the paper or lath has failed across the house; a two-story home adds scaffolding at $1,200–$6,050.

How much does stucco cost in Fresno?

$12,100–$26,200, with $17,150 typical. A single-story home with a dash or lace texture sits at the low end; a two-story home, a smooth finish or tear-off of old stucco pushes the bill toward $26,200. Quotes above that usually include new lath and paper on every wall.

If the old stucco is sound, you rarely need a full re-stucco. A new finish coat ($3–$7 per sq ft) or color coat ($1.50–$5) fixes the look for a third of the price. Figures re-checked against 98 sources in November 2026.

Stucco prices in Fresno (2026): per square foot and per home

Three-coat stucco costs $6–$13 per sq ft installed, a re-dash $3–$7, and painting $1.50–$4. Whole-home figures below are for about 2,000 sq ft of wall.

Line on the quoteLowTypicalHigh
Traditional three-coat stucco (per sq ft of wall)$6$8.50$13
One-coat (fiber-reinforced) stucco system (per sq ft)$5$7$10
Synthetic stucco (EIFS) with foam insulation board (per sq ft)$8$12$18
Re-dash existing stucco, per sq ft$3$4.50$7
Acrylic color coat, per sq ft$1.50$3$5
Paint a 2,000 sq ft stucco home$3,000$5,000$8,000
Small repair: hairline cracks or one hole, under 10 sq ft$250$505$905
Remediate water damage, per sq ft$15$30$50

The material is the cheap bit. Cement, sand, paper and lath for a 2,000 sq ft home run $4,000–$8,000; the Fresno price of $12,100–$26,200 is mostly skilled hands, time between coats and scaffolding.

What moves a stucco quote in Fresno:

  • System — three-coat $6–$13 per sq ft; one-coat $5–$10; synthetic (EIFS) $8–$18.
  • Stories and access — a two-story home adds scaffolding at $1,200–$6,050 and slower work at height.
  • What is under the old stucco — tear-off ($1.50–$6 per sq ft) and water-damage remediation ($15–$50) are where quotes grow.
  • Finish — smooth (Santa Barbara) finishes add $1–$6 per sq ft over a lace or dash texture.
  • Painting or color coat — $1.50–$4 per sq ft to paint; $1.50–$5 for an acrylic color coat that needs no paint for years.

Ask every Fresno bidder for the same six things: the measured wall area, the system (three-coat, one-coat or EIFS) and its thickness, the paper and lath spec, how the finish coat is colored, scaffolding and permit as separate lines, and the warranty. Compare those, not the headline price. Get a quote for your stucco job →

Stucco Cost in Fresno by Home Size

Quick answer

1,500 sq ft single-story: $9,050–$19,650. 2,000 sq ft: $12,100–$26,200. 3,000 sq ft two-story, scaffolding included: $19,350–$45,350. All three-coat, installed.

Worked example: a Fresno 2,000 sq ft single-story home with sound stucco that looks tired. A re-dash at $9,000 plus a few crack repairs at $505 comes to about $9,505, with no paint needed if the finish is colored.

The same house with failed paper under two walls: remediating 300 sq ft at $9,000 plus a re-dash of the rest to blend the look ($7,650) is about $16,650. Tearing everything off and starting again would be $23,150.

Fresno Stucco Costs by System and Finish

Stucco systemCostBest for
Traditional three-coat stucco$6–$13 per sq ftMost homes. Scratch, brown and finish coats about 7/8 inch thick over paper and metal lath. Lasts 50 years or more and takes paint or color coat well.
One-coat (fiber-reinforced) system$5–$10 per sq ftFaster, thinner (about 3/8 to 1/2 inch) base over foam or paper, then a finish. Common on tract homes in the Southwest; less forgiving of poor flashing.
Synthetic stucco (EIFS)$8–$18 per sq ftFoam board, mesh and an acrylic finish. Best insulation and crack resistance, but repairs cost two to four times as much and it needs a drainage layer and careful flashing.
Acrylic finish or color coat$1.50–$5 per sq ftSound stucco that just looks tired. Colored acrylic or cement finish bonded to the old surface; no repainting for 15–20 years.
Re-dash or resurface$3–$7 per sq ftHairline-cracked or patched walls with a dry wall behind them. New base and finish coat over the old stucco, keeping the lath and paper.
Smooth (Santa Barbara) finish, three-coat$7–$19 per sq ftThe high-end look, $1–$6 per sq ft more than a dash or lace texture. Slower, more skilled troweling, and it shows hairline cracks more.
Stucco over brick or block$5–$10 per sq ftMasonry homes, Florida block houses and chimneys. Often two coats bonded straight to the masonry, no lath, so it costs less per square foot.
Painted stucco (elastomeric or acrylic paint)$1.50–$4 per sq ftRefreshing color every 7–15 years. Elastomeric bridges hairline cracks; acrylic breathes better.
Venetian plaster (interior)$10–$30 per sq ftPolished interior walls and accent walls. Several thin lime or acrylic coats burnished to a marble-like sheen.
Vinyl siding (for comparison)$3–$11 per sq ftThe cheapest cladding to install. Lasts 20–40 years, no painting, but it fades, cracks in hail and melts near heat.
Fiber cement siding (for comparison)$7–$14 per sq ftWet and freeze-thaw climates where stucco struggles. A long-life cladding that needs repainting on about the same cycle as stucco.
Cost by stucco system in FresnoTypical range, per sq ft.
Traditional three-coat stucco $6–$13per sq ft
One-coat (fiber-reinforced) system $5–$10per sq ft
Synthetic stucco (EIFS) $8–$18per sq ft
Acrylic finish or color coat $2–$5per sq ft
Re-dash or resurface $3–$7per sq ft
Smooth (Santa Barbara) finish, three-coat $7–$19per sq ft
Stucco over brick or block $5–$10per sq ft
Painted stucco (elastomeric or acrylic paint) $2–$4per sq ft
Venetian plaster (interior) $10–$30per sq ft
Vinyl siding (for comparison) $3–$11per sq ft
Fiber cement siding (for comparison) $7–$14per sq ft
Fresno tip: if a quote is far under $12,100 for a whole house, check for the paper and lath lines. Skipping the second layer of paper or the weep screed is how cheap stucco fails in five years.

Material cost vs. what you pay — the Fresno stucco bill

Cement, sand, lath and paper for a 2,000 sq ft home cost about $4,000–$8,000, and a bag of base coat is under $30. The installed price in Fresno, $12,100–$26,200, pays for a crew of plasterers for one to three weeks, three separate coats with curing time between them, scaffolding, cleanup and a warranty on the work.

Labor is the part that moves with the city. Fresno is a mid-size market, so a three-coat job here is in line with the US typical of $17,000. Stucco crews bill $45–$95 an hour when they bill by the hour, but almost every whole-house job is quoted by the square foot of wall.

What's included in a Fresno stucco quote (and what costs extra)

A standard three-coat price covers paper, lath, weep screed, corner beads, the three coats, a standard texture and cleanup. The headline price often leaves out:

  • Scaffolding — $1,200–$6,050 on a two-story home, often a separate line
  • Tear-off of old stucco or siding — $1.50–$6 per sq ft for stucco, $1–$3 for siding, plus disposal
  • Painting or color coat — $1.50–$4 per sq ft to paint; $1.50–$5 for an acrylic color coat
  • Permit and inspection — $100–$500 where the city requires one for new stucco or re-lathing

Ask how long the warranty on the work lasts and whether it covers cracking; good companies put it in writing.

What Affects Stucco Costs in Fresno

Three-coat, one-coat or synthetic

Three-coat stucco costs $6–$13 per sq ft in Fresno; a one-coat system $5–$10; synthetic stucco (EIFS) $8–$18. EIFS insulates best but costs the most to repair.

Wall area, not floor area

A 2,000 sq ft single-story home has roughly 2,000 sq ft of wall; a two-story home of the same floor area has far more. The 1,500 sq ft home in the table runs $9,050–$19,650; a 3,000 sq ft two-story home $19,350–$45,350 with scaffolding.

What is behind the old stucco

A re-dash over sound stucco is $3–$7 per sq ft. If the paper or lath has failed, tear-off ($1.50–$6) and remediation ($15–$50 per sq ft) apply, and the quote can double.

Texture choice

Dash, lace and sand finishes are the standard price. A smooth Santa Barbara finish adds $1–$6 per sq ft and shows hairline cracks more. Integral color in the finish coat saves the $1.50–$4 per sq ft paint job.

Local rules

Any stucco job of $1,000 or more in Fresno, labor and materials together, needs a contractor licensed by the state board, normally with the C-35 lathing and plastering classification. Re-stucco and re-lath work usually needs a building permit ($100–$500).

Labor rates in Fresno

Labor is most of the bill. Fresno is a mid-size market, so a three-coat job is in line with the US typical of $17,000. Crews bill about $45–$95 an hour; a whole house is quoted by the square foot.

Season and weather

Cement coats need 40–90°F and 48 hours of misting after the brown coat, then about a week before the finish. Rain, frost or desert heat stretch a Fresno job, and many crews offer better prices in their slow months.

How to Save Money on Stucco in Fresno
  1. Re-dash instead of re-stucco.If the wall behind is dry, a new finish coat at $3–$7 per sq ft ($9,000 on 2,000 sq ft) costs far less than a full $17,150 three-coat job.
  2. Color the finish coat.Integral color or an acrylic color coat ($1.50–$5 per sq ft) means no $3,000–$8,000 paint job now and none for 15–20 years.
  3. Get the wall measured.Quotes should be per square foot of wall, measured on site, minus windows and doors. A quote off the home's floor area can be 10–30% high.
  4. Bundle the small jobs.A crew already on site patches cracks for far less than a separate $250–$905 call. Have every wall checked while the scaffolding is up.
  5. Book the slow season.Crews in Fresno quote lower when their calendar is thin. Spring and fall give the best curing weather; ask about off-peak dates.
  6. Inspect before you buy or sell.A $405–$1,500 moisture inspection finds hidden water damage before it becomes $15–$50-per-sq-ft remediation. Worth it on any stucco home built in the 1990s or 2000s.
Stucco Cost in Fresno: What the Quote Should Include

Fresno stucco companies often quote off a quick walk-around. Before you agree to the work, get these in writing:

  • The wall area measured on site, in square feet, with windows and doors taken out
  • The system: three-coat, one-coat or EIFS, and the finished thickness
  • Paper (two layers over wood sheathing), lath type, weep screed and corner beads
  • Flashing and kickouts at windows, doors and roof-to-wall joints
  • The finish texture and how it is colored: integral, color coat or paint
  • Scaffolding, tear-off, disposal and permit as separate lines
  • Curing: misting after the brown coat and the wait before the finish
  • Warranty on cracking and water intrusion, in years
Frequently asked questions — Stucco cost in Fresno
How much does it cost to stucco a house in Fresno?

$12,100–$26,200 for a 2,000 sq ft home with a traditional three-coat system, labor and materials, and $17,150 is typical. That is $6–$13 per sq ft of wall.

How much is stucco per square foot in Fresno?

$6–$13 per sq ft installed for three-coat stucco, $5–$10 for a one-coat system and $8–$18 for synthetic stucco (EIFS). A re-dash over sound stucco is $3–$7.

How much does stucco repair cost in Fresno?

$250–$905 for a small patch of cracks or one hole, about $505 typical. Replacing a 50–200 sq ft section is $2,500–$6,050; water-damage remediation $15–$50 per sq ft.

How much does it cost to paint a stucco house in Fresno?

$3,000–$8,000 for a 2,000 sq ft home, or $1.50–$4 per sq ft, two coats. An acrylic color coat instead runs $3,000–$10,000 and skips repainting for 15–20 years.

Can I stucco my house myself?

The materials are cheap ($4–$8 per sq ft with paper and lath) but three-coat stucco is a skilled, timed job: each coat has to go on wet-edge to wet-edge in one go and cure right. Most DIY jobs crack. Patching a small hole is a fair DIY task; a wall is not.

How much does it cost to re-stucco a house in Fresno?

$6,000–$14,000 to re-dash a 2,000 sq ft home over sound stucco. Tearing the old stucco off first and doing a full three-coat job is $15,100–$38,200.

Do I need a permit for stucco in Fresno?

Usually for new stucco or re-lathing, not for patching or a finish coat. Permits run about $100–$500; your contractor should pull it. Check with the city building department before work starts.

Should I repair or replace my stucco?

Repair it if the wall behind is dry: patches are $250–$905 and a re-dash $3–$7 per sq ft. Replace it when the paper or lath has failed, the stucco is hollow over large areas, or more than a quarter of a wall is damaged. Full replacement is $12,100–$26,200.

How long does stucco last?

50–100 years when installed right and kept sealed. Paint lasts 7–15 years; an acrylic color coat 15–20. Hairline cracks are normal; cracks you can fit a dime in need a look.

What's included in a Fresno stucco quote?

Paper, lath, weep screed, three coats, a standard texture and cleanup. Often extra: scaffolding ($1,200–$6,050), tear-off ($1.50–$6 per sq ft), painting or color coat, and the permit ($100–$500).

Prices verified November 2026 · Cross-referenced against 98+ American pricing sources · See methodology

Prices for the Fresno metro area, November 2026. Outer suburbs may vary.

Our methodology
These are independent estimates built from public cost guides, 2026 contractor and city price pages, manufacturer and material data, permit schedules and federal wage data. No stucco company can pay to change them, so always get a couple of quotes. Last reviewed November 2026. Read our full methodology →

Get a fair stucco quote in Fresno

Local stucco contractors · Free quotes · No obligation, no spam.

Get quotes in Fresno →Max 2 stucco contractors will contact you
Get quotes in FresnoMax 2 stucco contractors · free · no spam→