Skip to content
Independent United States Cost GuidesPrices verified November 2026 · 39 trades · 195 US cities · 221+ sources For pros →
Get a fair quote

Cost guides

Plumbing & water4 trades
Electrical & energy5 trades
Renovation8 trades
Structural7 trades
Outdoor & yard7 trades
Cleaning & maintenance8 trades

More

Get a fair quote
Cost guide

How much does a carpenter cost in Tampa?

By Our research team · Last verified · Methodology

Updated November 2026Independently researched12 min read
Carpenter cost

Carpenter costs in Tampa

Get free quotesFree · no obligation · max 2 pros
Normal range for Tampa, FL
$40–$115per hour

Most carpenters in Tampa charge $40–$115/hr with $70/hr typical. Expect a $95–$360 minimum for a small job, $7–$15 a foot for crown molding and $2,400–$7,550 for a 10 × 12 pergola.

How we get this data
Typical
$70/hr
Low end
$25/hr
High end
$180/hr
Hourly rate
$40–$115
Day rate (8 hrs)
$320–$920
Hang a pre-hung door
$140–$500
Baseboard, per ft
$4–$11

Want an exact price for your job?

Tell us the job. Casey checks it by text, then up to 2 local carpenters send you a real quote. Free, no obligation.

Get my fair quote →
Typical carpenter price: Tampa vs nearby citiesTypical price, per hour. The line marks the US typical.
Tampa, FLThis guide $70/hr
Sarasota, FL $65/hr
Orlando, FL $65/hr
Lakeland, FL $60/hr
Palm Bay, FL $60/hr

The typical Tampa price is $70/hr, 7% below the US typical of $75/hr.

Where Tampa sits among 195 US metrosNumber of metros at each typical carpenter price, per hour.

Tampa's price band

Tampa is cheaper than 46% of the 195 US metros we price for carpenter work.

A carpenter in Tampa charges $40–$115 an hour, and $70/hr is typical. A full day runs $320–$920. Most jobs are quoted flat instead: $140–$500 to hang a pre-hung interior door, $4–$11 a foot for baseboard installed, and $875–$3,600 for a reach-in closet build-out.

Tampa is a large metro with mid-range labor prices. Carpenters in the Tampa-St. Petersburg-Clearwater metro earn a median $52,130 a year in federal wage data, about 14% below the US median of $60,580, and since an hourly rate is almost all labor, the going rate here lands about 7% below the US typical of $75/hr.

Check your state contractor board for the dollar line above which a carpenter must hold a contractor license or registration, and ask your city building department whether the job needs a permit — framing, decks, stairs and structural repair usually do; trim, doors and closets usually do not. This is general information, not legal advice.

Comparing cities, or after the US-wide picture? See the national guide: Carpenter cost in the USA.

Quick answer

$40–$115/hr for a carpenter in Tampa — typically $70/hr, or $320–$920 for a full day. Hanging a pre-hung door is $140–$500, baseboard $4–$11 a foot installed, and a reach-in closet build-out $875–$3,600. Verified November 2026. Get free Tampa quotes →

  • Carpenter: $40–$115/hr ($70/hr typical); day rate $320–$920
  • Finish carpenter $55–$145/hr; framer $40–$80/hr; minimum $95–$360
  • Baseboard $4–$11/ft; crown molding $7–$15/ft installed
  • Hang a pre-hung door $140–$500; exterior entry door $580–$2,400 installed
  • Reach-in closet $875–$3,600; built-ins $240–$930/linear ft; pergola $2,400–$7,550

Prices verified November 2026 · Cross-referenced against 24+ American pricing sources · See methodology

Detailed pricing — Carpenter cost in Tampa 2026

Labor with fasteners and basic supplies included; rows marked installed include standard paint-grade material. Tampa metro, re-verified November 2026. Painting new trim, permits and premium hardwood are extra.

ServiceLowTypicalHigh
Carpenter hourly rate (labor, standard hours)/hr$40/hr$70$115
Carpenter day rate (8 hours, one carpenter)per day$320per day$560$920
Baseboard, installed (labor and primed MDF or pine), per linear ftper linear ft$4per linear ft$6$11
Door and window casing, installed, per linear ftper linear ft$4per linear ft$6$11
Crown molding, installed, per linear ftper linear ft$7per linear ft$10$15
Wainscoting or board-and-batten, installed, per sq ft of wallper sq ft$10per sq ft$18$35
Hang a pre-hung interior door (labor only, your door)per door$140per door$275$500
Interior door, installed, mid-range pre-hung door includedper door$240per door$425$800
Exterior entry door, installed (steel or fiberglass door included)per door$580per door$1,250$2,400
Door repair or rehang (sticking, sagging, loose frame)per job$95per job$180$365
Wood window repair (sash, sill or rotted trim)per job$145per job$300$600
Framing, labor and lumber, per sq ft of floor area (walls, not roof)per sq ft$7per sq ft$11$19
Deck building labor, per sq ft (framing and decking, materials extra)per sq ft$8per sq ft$14$25
Deck repair (replace boards, a joist or a railing section)per job$285per job$835$2,300
Stair repair (squeaky or loose tread, baluster, newel)per job$140per job$365$1,150
Stair handrail or railing, installed, per linear ftper linear ft$19per linear ft$35$85
Reach-in closet build-out (shelves, rods and drawers, installed)per closet$875per closet$1,700$3,600
Walk-in closet system, installedper closet$2,450per closet$4,750$9,500
Closet doors (bifold or bypass), replacedper opening$195per opening$375$800
Extra drawer unit in a closet or built-inper drawer$95per drawer$165$240
Custom built-ins (bookcase, entertainment wall), installed, per linear ftper linear ft$240per linear ft$465$930
Shelving installation (floating or wall shelves, a few)per job$140per job$320$730
Rot or structural repair (sill plate, rim joist, fascia or post)per job$480per job$1,400$3,700
Pergola, 10 × 12 ft wood, built on siteper pergola$2,400per pergola$4,250$7,550
carpenter jobs in Tampa: what they costPer job, low to high with the typical price marked. Every line is in the table above.
Rot or structural repair (sill plate, rim joist, fascia or post) $1,400$480–$3,700
Deck repair (replace boards, a joist or a railing section) $835$285–$2,300
Stair repair (squeaky or loose tread, baluster, newel) $365$140–$1,150
Shelving installation (floating or wall shelves, a few) $320$140–$730
Wood window repair (sash, sill or rotted trim) $300$145–$600
Door repair or rehang (sticking, sagging, loose frame) $180$95–$365
Already got a quote?
Check it against these Tampa prices — free, no sign-up.
$

Got it as a PDF or photo? Upload up to 3 quotes and compare →

Free quotes

Get free quotes from up to 2 local carpenters in Tampa

Free · No obligation · About a minute

  1. 1The job
  2. 2Budget
  3. 3Your details
Casey · LocalGoingRate

What do you need a carpenter for?

Tap one to start.

Prices verified November 2026 · Cross-referenced against 24+ American pricing sources · See methodology

Prices cover the Tampa metro. Outlying towns can run a little lower; older homes in Downtown, Ybor & Seminole Heights and East Tampa & Brandon sit at the top of each range for odd sizes and plaster.

How carpenter costs vary across Tampa

Carpenter rates across Tampa

Where you live changes the labor, not the lumber. Older homes in Downtown, Ybor & Seminole Heights take the longest; rates in Carrollwood, Wesley Chapel & the suburbs sit near the city typical, with bigger jobs.

Carpenter prices across TampaTypical range by part of the metro, per hour. The line marks the Tampa typical.
Downtown, Ybor & Seminole Heights8–12% above the city average $45–$130
East Tampa & BrandonStandard pricing $40–$115
St. Petersburg & ClearwaterStandard to 6% above $40–$120
Carrollwood, Wesley Chapel & the suburbsStandard; bigger jobs, more driving $40–$120

Downtown, Ybor & Seminole Heights

8–12% above the city average
Downtown, Ybor City, Seminole Heights
Hourly
$45–$130/hr
Day rate
$345–$1,050 / day rate

The priciest part of the metro for a carpenter's visit: parking, elevators to book and out-of-square old walls that make every piece of trim a custom cut.

East Tampa & Brandon

Standard pricing
East Tampa, Brandon, Riverview
Hourly
$40–$115/hr
Day rate
$320–$920 / day rate

Residential streets with average pricing. Bundling several small jobs into one visit is the easiest way to save here.

St. Petersburg & Clearwater

Standard to 6% above
St. Petersburg, Clearwater, Pinellas Park
Hourly
$40–$120/hr
Day rate
$330–$975 / day rate

Lots of fix-and-flip and whole-house remodels, so finish carpenters are busy here. Quotes vary widely; get two, and make sure both say who paints and fills the trim.

Carrollwood, Wesley Chapel & the suburbs

Standard; bigger jobs, more driving
Carrollwood, Wesley Chapel, Town 'n' Country
Hourly
$40–$120/hr
Day rate
$320–$950 / day rate

Mostly newer drywall homes with standard-size doors and openings, which keeps jobs quick. Expect average rates plus more square feet per job.

What you'll actually pay — job by job

Real-world carpentry costs in Tampa

Here's what common carpenter jobs cost in Tampa in 2026, labor, fasteners and basic supplies included.

One quick fix — a sticking or sagging door

$95–$365

Planing an edge, shimming a hinge or resetting a strike plate takes under an hour, but most Tampa carpenters charge a minimum of $95–$360. Priced as a flat job it is $95–$365. Add a second small job to the same visit and the minimum stops hurting.

Trim out a 12 × 12 bedroom — baseboard, crown, one door and one window

$700–$1,630

About 45 ft of baseboard ($180–$495), 48 ft of crown ($335–$720), casing on the door ($70–$185) and the window ($115–$230) comes to $700–$1,630 in Tampa, with primed MDF or pine. Filling, caulking and painting the trim is usually a separate line or a painter's job.

Replace three interior doors and fix a fourth

$815–$2,765

Three mid-range pre-hung doors installed at $425 each plus one repair at $180 is about $1,455. If the old doors are odd sizes — common in homes built before 1950 — the carpenter may have to trim or build out jambs, which pushes each door toward $800.

Reach-in closet build-out with two extra drawers

$1,065–$4,080

Shelves, a double hanging rod and a shoe rack in a standard 6–8 ft reach-in run $875–$3,600 in Tampa; two drawer units add $165 each, for about $2,030. A walk-in closet system is $2,450–$9,500.

Rotted rim joist and a deck repair

$765–$6,000

Cutting out a rotted sill or rim joist and sistering new lumber is $480–$3,700 depending on how far the rot runs; replacing a few deck boards and a railing section is $285–$2,300. Together about $2,235. Anything load-bearing may need a permit in Tampa, and the carpenter should say so before starting.

How much does a carpenter cost in Tampa?

$40–$115/hr, and $70/hr is the number most Tampa homeowners see. On small jobs the minimum matters more than the rate: a $180 minimum decides the bill for a 30-minute door fix, which is why most carpenters quote flat prices for doors, trim and closets instead.

By the job, Tampa carpenters charge $140–$500 to hang a pre-hung door, $4–$11 a foot for baseboard and $7–$15 a foot for crown molding, so trimming out a 12 × 12 bedroom runs $700–$1,630. Figures re-checked against 24 sources in November 2026.

Carpenter rates and fees in Tampa (2026)

Standard rates run $40–$115/hr, a full day $320–$920, and the minimum charge for a small job $95–$360.

Line on the quoteLowTypicalHigh
Standard hourly rate (general carpenter)$40$70$115
Finish or trim carpenter, hourly$55$85$145
Framing carpenter, hourly$40$55$80
Master carpenter, hourly$75$110$180
Minimum charge for a small job$95$180$360
Service call (1–1.5 hours of the rate)$40$90$175
Half day (4 × the hourly rate)$160$280$460
Full day (8 × the hourly rate)$320$560$920

One visit vs one day in Tampa: a single quick fix costs the $95–$360 minimum, while $320–$920 buys eight hours. If your list has four or five jobs on it, price the day.

What moves a carpentry quote in Tampa:

  • Finish or rough — framing bills $40–$80/hr and is priced per square foot; finish work bills $55–$145/hr because every joint shows.
  • The minimum — most carpenters charge $95–$360 for any visit, so a 30-minute door fix costs far more per minute than a day of trim.
  • Materials — paint-grade MDF or finger-joint pine is the cheap case; stain-grade oak, poplar or hardwood trim can double the material line, plus a 10–20% markup if the carpenter buys it.
  • The age of the house — out-of-square openings, plaster walls and odd-size doors in East Tampa & Brandon add hours; new construction in Carrollwood, Wesley Chapel & the suburbs goes fast.
  • Permits — trim, doors and closets need none; framing, load-bearing changes, decks and stairs usually do, and the permit plus any structural drawings add $50–$500 and up.

Ask every Tampa carpenter the same five things: hourly or flat, the minimum charge, who buys the lumber and at what markup, whether filling, caulking and painting are included, and who pulls the permit if one is needed. Get a quote for your carpentry job →

Carpenter cost in Tampa by job size

Quick answer

One small fix is $95–$360 (the minimum charge), a half day $160–$460, a full day $320–$920. A whole-room trim package is $700–$1,630, a reach-in closet $875–$3,600, a pergola $2,400–$7,550.

Worked example: trimming out a 12 × 12 bedroom in Tampa. About 45 ft of baseboard at $6 a foot ($270), 48 ft of crown at $10 ($480), casing on one door ($100) and one window ($160) comes to about $1,010 with primed material, before paint.

A bigger job: framing the walls of a 12 × 12 room at $11 a square foot with lumber is about $1,600, and a 10 × 12 wood pergola is $4,250 typical. The pergola costs more per hour of work because the lumber, hardware and footings are in the price; framing is mostly labor.

Who to hire in Tampa and what each carpenter costs

Who to hireCostBest for
General carpenter (journeyman)$45–$90/hrDoors, trim, decks, repairs and most everyday jobs. The rate most homeowners see.
Finish or trim carpenter$55–$145/hrBaseboard, casing, crown molding, wainscoting and stairs where the joints show. Slower and neater than a framer.
Framing (rough) carpenter$40–$80/hrWalls, floors, decks and additions, usually priced per square foot ($7–$19) rather than by the hour.
Cabinetmaker or built-ins specialist$70–$115/hrCustom bookcases, entertainment walls and closets, usually quoted per linear foot ($240–$930).
Master carpenter$75–$180/hrComplex stairs, curved work, historic trim profiles and jobs where nothing is standard.
Apprentice or helper$35–$50/hrBilled alongside a lead carpenter on bigger jobs. A two-person framing crew runs $75–$135/hr.
Handyman doing carpentry$40–$90/hrRehanging a door, a few feet of baseboard, a loose railing. Not for structural work or anything that needs a permit.
Day rate (8 hours, one carpenter)$320–$920 per dayA list of small jobs, a trim package or a two-day build. Cheaper than several separate visits.
Cost by who to hire in TampaTypical range, per hour.
General carpenter (journeyman) $45–$90
Finish or trim carpenter $55–$145
Framing (rough) carpenter $40–$80
Cabinetmaker or built-ins specialist $70–$115
Master carpenter $75–$180
Apprentice or helper $35–$50
Handyman doing carpentry $40–$90
Tampa tip: for trim, stairs and built-ins, pay the finish carpenter's rate ($55–$145/hr). For walls, decks and framing, a framer at $40–$80/hr is the right hire.

Hourly rate vs what you actually pay — the Tampa carpentry bill

A $70/hr rate rarely shows up as $70 on the invoice. Most Tampa carpenters charge a $95–$360 minimum, so fixing one door costs $95–$365 as a flat job. Trim is priced by the foot — $4–$11 for baseboard, $7–$15 for crown — and the per-foot price already includes the material, the cuts, the nailing and the drive, which is why it works out to more than the hourly rate alone.

Compare flat prices, not hourly headlines. Two quotes for a 12 × 12 bedroom's trim ($700–$1,630 here) can differ by a third depending on whether one includes the material, the filling and caulking, and hauling the old trim away. Ask what is in each line before you compare the totals.

What's included in a Tampa carpenter's quote (and what costs extra)

A standard carpentry quote covers labor, fasteners, glue and shims, cutting and fitting, and cleanup of the work area. Often left out:

  • Materials — lumber, trim, doors and hardware, plus a 10–20% markup if the carpenter buys them
  • Filling, caulking and painting — new trim usually arrives primed; painting it is $1–$4 a foot extra or a painter's job
  • Service call and the minimum — a service call is billed as $40–$175; $95–$360 minimum on a short visit
  • Permits and drawings — $50–$500 for a permit on framing, decks or stairs; $250–$1,000 for structural drawings on a load-bearing change

Ask for the price in writing before work starts, and for proof of liability insurance.

What affects carpenter costs in Tampa

Finish or rough work

Framing carpenters in Tampa bill $40–$80/hr, or $7–$19 a square foot with lumber. Finish carpenters bill $55–$145/hr because trim, stairs and built-ins show every cut.

Minimums and travel

Most carpenters charge a $95–$360 minimum, and a service call is billed as $40–$175 — one to one and a half hours of the rate — before the work starts.

Materials and markup

Primed MDF baseboard costs a few dollars a foot; stain-grade hardwood several times that. If the carpenter buys the lumber, expect the receipt plus a 10–20% markup. An interior door itself runs $30–$350 at the home center before labor.

Who does the work

A handyman doing light carpentry bills $40–$90/hr; a journeyman carpenter $45–$90/hr; a master $75–$180/hr. Pay for the skill the job needs — a sagging door does not need a master, a curved stair does.

Licensing and permits

Check your state contractor board for the dollar line above which a carpenter must hold a contractor license or registration, and ask your city building department whether the job needs a permit — framing, decks, stairs and structural repair usually do; trim, doors and closets usually do not.

Labor rates in Tampa

Carpenters in the Tampa-St. Petersburg-Clearwater metro earn a median $52,130 a year in federal wage data, about 14% below the US median. An hourly rate is almost all labor, so Tampa prices land about 7% below the US typical of $75/hr.

The age of the house

Homes built before 1950 rarely have square openings or standard door sizes, and plaster walls crack when trim is nailed. Expect more hours in East Tampa & Brandon and Downtown, Ybor & Seminole Heights; newer homes in Carrollwood, Wesley Chapel & the suburbs go faster.

How to save on a carpenter in Tampa
  1. Batch small jobs into one visit.One $180 minimum can cover a door fix, a loose railing and a few feet of trim. Write a list before the carpenter arrives.
  2. Book a day rate for long lists.A full day in Tampa is $320–$920. A trim package or four or five small jobs often costs less this way than flat prices one at a time.
  3. Choose paint-grade trim.Primed MDF or finger-joint pine baseboard costs a fraction of stain-grade oak and installs faster. Baseboard runs $4–$11 a foot installed here; hardwood can double the material line.
  4. Buy the doors and hardware yourself.An interior door costs $30–$350 at the home center. Supplying it skips the markup and the store run; labor to hang a pre-hung door is $140–$500.
  5. Get the finish line in writing.Ask whether filling nail holes, caulking and painting the trim are in the price. Many carpenters leave trim primed and unpainted, and a painter charges extra to finish it.
  6. Keep structural work permitted.Don't pay a carpenter to skip a permit on framing, a deck or a stair in Florida. A failed inspection or an insurance denial costs more than the permit.
What a carpenter's quote in Tampa should include

Tampa carpenters quote by the hour, by the foot or by the job. Before you pay a deposit, get these in writing:

  • The carpenter's name, business name and proof of liability insurance
  • Hourly rate plus the minimum charge, or a flat price per job
  • Each job on its own line — doors, trim per foot, closets, repairs
  • Materials: species and grade (paint-grade MDF, pine, poplar, oak), who buys them and at what markup
  • Whether filling, caulking and painting the trim are included
  • Removal and disposal of old trim, doors or rotted lumber
  • Whether the job needs a permit, and who pulls it
  • Start and finish dates, payment stages and the warranty on the work
Frequently asked questions — Carpenter cost in Tampa
How much does a carpenter cost per hour in Tampa?

$40–$115/hr, and $70/hr is typical. Framers bill $40–$80/hr, finish carpenters $55–$145/hr, and most charge a $95–$360 minimum.

What is a carpenter's day rate in Tampa?

About $320–$920 for 8 hours, before materials. It is the cheapest way to clear a list of small jobs or a trim package; a single service call is billed as $40–$175.

How much does it cost to install baseboard or crown molding in Tampa?

Baseboard is $4–$11 a linear foot installed with primed material, crown molding $7–$15. A 12 × 12 room's baseboard runs $180–$495; its crown $335–$720.

How much does it cost to hang a door in Tampa?

$140–$500 labor to hang a pre-hung interior door you supply, or $240–$800 with a mid-range door included. An exterior entry door installed is $580–$2,400.

How much is framing per square foot in Tampa?

$7–$19 per square foot of floor area with lumber, for walls. Framing a 12 × 12 room is about $1,000–$2,750; a single interior wall with drywall $960–$4,650.

How much do custom closets and built-ins cost in Tampa?

A reach-in closet build-out is $875–$3,600, a walk-in system $2,450–$9,500, and custom built-ins $240–$930 per linear foot installed.

Do I need a licensed carpenter in Florida?

Check your state contractor board for the dollar line above which a carpenter must hold a contractor license or registration, and ask your city building department whether the job needs a permit — framing, decks, stairs and structural repair usually do; trim, doors and closets usually do not.

Do I need a permit for carpentry work?

Not for trim, doors, closets, shelving or like-for-like repairs. Framing, moving or removing a wall, new window or door openings, decks over a small size, stairs and structural rot repair usually need a building permit, and a load-bearing change may need drawings from a licensed structural engineer. Ask the carpenter who pulls it. This is general information, not legal advice.

Is it cheaper to pay a carpenter by the hour or by the job?

For one clear job — a door, a run of trim, a closet — a flat price is usually cheaper and safer. For a long list, a day rate ($320–$920) costs less than paying $95–$360 minimums one visit at a time.

Does a carpenter supply the lumber and doors?

Most will, at cost plus a 10–20% markup, and some charge for the trip. You can save by buying doors ($30–$350 each for the door itself) and hardware yourself; let the carpenter pick the trim stock so the profiles match.

Prices verified November 2026 · Cross-referenced against 24+ American pricing sources · See methodology

Prices for the Tampa metro area, November 2026. Outer suburbs may vary.

Our methodology
These are independent estimates built from published cost guides, platform price data, dated city price pages, home-center material prices and federal wage data. No carpenter can pay to change them, so always get two or three quotes. Last reviewed November 2026. Read our full methodology →

Get a fair carpenter quote in Tampa

Local carpenters · Free quotes · No obligation, no spam.

Get quotes in Tampa →Max 2 carpenters will contact you
Get quotes in TampaMax 2 carpenters · free · no spam→