Skip to content
Independent United States Cost GuidesPrices verified November 2026 · 39 trades · 195 US cities · 221+ sources For pros →
Get a fair quote

Cost guides

Plumbing & water4 trades
Electrical & energy5 trades
Renovation8 trades
Structural7 trades
Outdoor & yard7 trades
Cleaning & maintenance8 trades

More

Get a fair quote
Cost guide

How much does drywall cost in Tampa?

By Our research team · Last verified · Methodology

Updated November 2026Independently researched12 min read
Drywall cost

Drywall costs in Tampa

Get free quotesFree · no obligation · max 2 pros
Normal range for Tampa, FL
$735–$1,750per room

Drywalling a 12×12 room in Tampa costs $735–$1,750 including board, mud, tape and a paint-ready finish. $1,150 is the going rate; by the sheet it's $45–$95 hung and finished.

How we get this data
Typical
$1,150
Low end
$505
High end
$2,750
Per 12×12 room
$735–$1,750
Per sq ft (hang + finish)
$1.40–$3.00
Small hole patch
$70–$230
Water-damage repair
$275–$1,850

Want an exact price for your job?

Tell us the job. Casey checks it by text, then up to 2 local drywall contractors send you a real quote. Free, no obligation.

Get my fair quote →
Typical drywall price: Tampa vs nearby citiesTypical price, per room. The line marks the US typical.
Orlando, FL $1,200
Tampa, FLThis guide $1,150
Sarasota, FL $1,150
Lakeland, FL $1,100
Palm Bay, FL $1,100

The typical Tampa price is $1,150, 8% below the US typical of $1,250.

Where Tampa sits among 195 US metrosNumber of metros at each typical drywall price, per room.

Tampa's price band

Tampa is cheaper than 54% of the 195 US metros we price for drywall work.

Hanging and finishing drywall costs $1.40–$3.00 per sq ft in Tampa, or $45–$95 a sheet. A small hole patch is $70–$230, a large one $140–$415, and water-damage repair $275–$1,850. Skim-coating a room's walls smooth runs $365–$735.

Angi's 2026 Tampa figure for a drywall installation project is $1,933 on average ($873–$3,035), or $0.75–$2 per sq ft. Florida's contractor licensing law defines no drywall category, so drywall contractors are not state-licensed here; check the company's insurance and any county or city registration, and ask for moisture- or mold-resistant board in bathrooms, garages and any room that has flooded.

Installed prices include materials and labor to a paint-ready finish. Patches, water stains and ceilings are the jobs most Tampa homeowners call about; new drywall for a whole room or house is priced by the square foot.

Comparing cities, or after the US-wide picture? See the national guide: Drywall cost in the USA.

Quick answer

$735–$1,750 to hang and finish drywall in one 12×12 room in Tampa, labor and materials — typically $1,150. That's $1.40–$3.00 per sq ft or $45–$95 a sheet; a small hole patch is $70–$230 and water-damage repair $275–$1,850. Verified November 2026. Get free Tampa quotes →

  • One 12×12 room hung and finished: $735–$1,750 ($1,150 typical)
  • Per sq ft $1.40–$3.00; per sheet $45–$95
  • Small hole $70–$230; large hole $140–$415; water damage $275–$1,850
  • Skim coat $0.90–$2.75 per sq ft; popcorn removal $140–$415 per 100 sq ft
  • Priciest area to work in: Downtown, Ybor & Seminole Heights; lowest quotes: Carrollwood, Wesley Chapel & the suburbs

Prices verified November 2026 · Cross-referenced against 83+ American pricing sources · See methodology

Detailed pricing — Drywall cost in Tampa 2026

Installed prices include labor and materials to a paint-ready finish; repairs are per job including the visit. Tampa metro, re-verified November 2026.

ServiceLowTypicalHigh
Hang and finish drywall, one 12×12 room (walls and ceiling, about 500 sq ft)per room$735per room$1,150$1,750
Drywall contractor hourly rate/hr$40/hr$65$90
Hang and finish, standard Level 4 finish, per 100 sq ft (labor and materials)per 100 sq ft$140per 100 sq ft$210$300
Level 5 smooth finish on new drywall, per 100 sq ftper 100 sq ft$165per 100 sq ft$255$325
One 4×8 sheet of 1/2-inch drywall, hung and finishedper sheet$45per sheet$65$95
Small hole or dent repair (under 4 in.), one visitper job$70per job$140$230
Large hole repair (6–12 in., new piece let in and finished)per job$140per job$255$415
Cracks, nail pops and seam repairper job$90per job$185$365
Water-damaged drywall: cut out, replace and finishper job$275per job$825$1,850
Ceiling drywall repair (sag, stain or hole)per job$230per job$550$1,100
Replace a 12×12 room ceiling: tear out, new drywall, finishedper room$465per room$835$1,400
Skim coat existing walls to a smooth finish, per 100 sq ftper 100 sq ft$90per 100 sq ft$120$275
Skim coat one 12×12 room, walls onlyper room$365per room$505$735
Wall texture (orange peel, knockdown, skip trowel), per 100 sq ftper 100 sq ft$75per 100 sq ft$120$185
Popcorn ceiling removal and re-skim (no asbestos), per 100 sq ftper 100 sq ft$140per 100 sq ft$230$415
Corner bead repair or replacement (one damaged outside corner)per corner$70per corner$140$275
New partition wall, framed and drywalled both sides (8 ft high), per linear ftper linear ft$25per linear ft$40$75
Soundproof drywall (QuietRock or double 5/8-inch layer), per 100 sq ft installedper 100 sq ft$335per 100 sq ft$500$715
Moisture- and mold-resistant drywall (green or purple board), per 100 sq ft installedper 100 sq ft$165per 100 sq ft$235$325
Drywall a 2-car garage, walls and ceiling (5/8-inch fire-rated where code requires)per garage$1,100per garage$2,050$3,550
Drywall a whole 2,000 sq ft house (about 7,000 sq ft of board), hung and finishedper house$8,400per house$14,000$26,150
Remove and dispose of old drywall, per 100 sq ftper 100 sq ft$45per 100 sq ft$95$185
Plaster wall or ceiling repair (cracks, holes, loose plaster)per job$140per job$365$1,100
Drywall crew day rate (two people, materials extra)per day$645per day$1,000$1,450
drywall jobs in Tampa: what they costPer 100 sq ft, low to high with the typical price marked. Every line is in the table above.
Soundproof drywall (QuietRock or double 5/8-inch layer), per 100 sq ft installed $500$335–$715
Level 5 smooth finish on new drywall, per 100 sq ft $255$165–$325
Moisture- and mold-resistant drywall (green or purple board), per 100 sq ft installed $235$165–$325
Popcorn ceiling removal and re-skim (no asbestos), per 100 sq ft $230$140–$415
Hang and finish, standard Level 4 finish, per 100 sq ft (labor and materials) $210$140–$300
Skim coat existing walls to a smooth finish, per 100 sq ft $120$90–$275
Wall texture (orange peel, knockdown, skip trowel), per 100 sq ft $120$75–$185
Remove and dispose of old drywall, per 100 sq ft $95$45–$185
Already got a quote?
Check it against these Tampa prices — free, no sign-up.
$

Got it as a PDF or photo? Upload up to 3 quotes and compare →

Free quotes

Get free quotes from up to 2 local drywall contractors in Tampa

Free · No obligation · About a minute

  1. 1The job
  2. 2Budget
  3. 3Your details
Casey · LocalGoingRate

What do you need a price on?

Tap one to start.

Prices verified November 2026 · Cross-referenced against 83+ American pricing sources · See methodology

Prices cover the Tampa metro. Outlying towns can run 5–10% lower; older homes in Downtown, Ybor & Seminole Heights sit at the top of each range.

How drywall costs vary across Tampa

Drywall prices across Tampa

Where you live in the metro changes the labor, not the board. Older homes in Downtown, Ybor & Seminole Heights take the longest; jobs in Carrollwood, Wesley Chapel & the suburbs tend to come in at or under the city typical.

Drywall prices across TampaTypical range by part of the metro, per room. The line marks the Tampa typical.
Downtown, Ybor & Seminole Heights8–12% above the city average $795–$1,950per room
East Tampa & BrandonStandard pricing $735–$1,750per room
St. Petersburg & ClearwaterStandard to 6% above $755–$1,850per room
Carrollwood, Wesley Chapel & the suburbsStandard; bigger rooms common $735–$1,800per room

Downtown, Ybor & Seminole Heights

8–12% above the city average
Downtown, Ybor City, Seminole Heights
Per 12×12 room
$795–$1,950 per room
Typical repair
$150–$465 / large hole patch

The priciest part of the metro for drywall work: tight access, building rules on dust and noise, and older walls that need more prep.

East Tampa & Brandon

Standard pricing
East Tampa, Brandon, Riverview
Per 12×12 room
$735–$1,750 per room
Typical repair
$140–$415 / large hole patch

Mostly post-war houses with drywall throughout, so repairs are quick and quotes cluster around the city typical.

St. Petersburg & Clearwater

Standard to 6% above
St. Petersburg, Clearwater, Pinellas Park
Per 12×12 room
$755–$1,850 per room
Typical repair
$145–$440 / large hole patch

Renovated older homes next to new builds. Standard rates for new drywall; repairs in the older stock often turn into skim coats.

Carrollwood, Wesley Chapel & the suburbs

Standard; bigger rooms common
Carrollwood, Wesley Chapel, Town 'n' Country
Per 12×12 room
$735–$1,800 per room
Typical repair
$140–$425 / large hole patch

Newer homes with easy access and drywall throughout. Visits are quick; the bigger bills are garages, additions and whole-house repaints after a skim coat.

What you'll actually pay — job by job

Real-World Drywall Costs in Tampa

Here's what common drywall jobs cost in Tampa in 2026, labor and materials to a paint-ready finish.

Doorknob hole in a bedroom wall — 1 visit, 1–2 hours

$70–$230

Cut a clean square, screw in a backer, let in a patch, tape and mud in two or three coats, sand. Most Tampa companies charge their $115–$185 minimum for a single patch, so add other holes to the same visit.

Ceiling stain and sag after a bathroom leak

$505–$2,950

Water-damaged board cut out and replaced ($275–$1,850) plus the ceiling repair and texture match ($230–$1,100). Fix the leak first; the drywall company won't warranty a patch under a live drip.

Drywall one 12×12 room (garage conversion, addition or basement) — 2–4 days

$735–$1,750

Walls and ceiling hung and finished to Level 4 for $1,150 typical, about 15 sheets. Moisture-resistant board for a bathroom or basement adds about $25 per 100 sq ft; paint is separate.

Scrape a popcorn ceiling in a living room (about 300 sq ft)

$420–$1,245

Scrape, skim smooth and prime at $140–$415 per 100 sq ft. In a home built before 1980, a lab test ($30–$75) comes first; if it's positive, abatement is a different trade at a much higher price.

Skim coat a textured bedroom smooth

$365–$735

Two thin coats of compound over the walls of a 12×12 room, sanded to Level 5, at $0.90–$2.75 per sq ft. The ceiling adds $100–$150 per 100 sq ft, and new paint is a must afterwards.

How much does drywall cost in Tampa?

$735–$1,750, with $1,150 typical. A room with a plain ceiling and few corners sits at the low end; a Level 5 smooth finish ($1.65–$3.25 per sq ft), a vaulted ceiling or lots of windows and closets lands near the top. Quotes above $1,750 usually mean a bigger room, demolition or texture.

Repairs are priced by the job, not the foot: $70–$230 for a small hole, $140–$415 for a large one, $275–$1,850 for water damage. Most Tampa companies have a $115–$185 minimum, so bundle small fixes into one visit. Prices re-checked against 83 sources in November 2026.

Drywall prices in Tampa (2026): new board, repairs and finishes

Hang and finish costs $1.40–$3.00 per sq ft in Tampa, a small hole patch $70–$230, and a skim coat $0.90–$2.75 per sq ft.

Line on the quoteLowTypicalHigh
Hang and finish, standard Level 4 finish, per 100 sq ft (labor and materials)$140$210$300
One 4×8 sheet of 1/2-inch drywall, hung and finished$45$65$95
Small hole or dent repair (under 4 in.), one visit$70$140$230
Large hole repair (6–12 in., new piece let in and finished)$140$255$415
Water-damaged drywall: cut out, replace and finish$275$825$1,850
Replace a 12×12 room ceiling: tear out, new drywall, finished$465$835$1,400
Skim coat existing walls to a smooth finish, per 100 sq ft$90$120$275
Popcorn ceiling removal and re-skim (no asbestos), per 100 sq ft$140$230$415

Repair or replace in Tampa: a wall with a few holes is a $140–$415 patch job; a wall with old texture or dozens of nail pops is a $0.90–$2.75 per sq ft skim coat; only a wall that is crumbling, moldy or wet through needs new board at $1.40–$3.00 per sq ft.

What moves a drywall quote in Tampa:

  • Finish level — Level 4 for painted walls is $1.40–$3.00 per sq ft; a Level 5 smooth finish $1.65–$3.25.
  • Ceilings and height — ceiling board is slower to hang; rooms over 8–10 ft add about 10–30%.
  • Board type — moisture-resistant board is $165–$325 per 100 sq ft installed; soundproof $335–$715.
  • Texture — matching orange peel or knockdown adds $75–$185 per 100 sq ft; scraping popcorn $140–$415.
  • Minimum charge — a single small patch costs $70–$230 because most companies charge a $115–$185 minimum visit.

Ask every Tampa company for the same five things: the finish level by number, whether primer is included, who hauls the debris, how texture will be matched, and the minimum charge. Compare those, not the headline price. Get a quote for your drywall job →

Drywall Cost in Tampa by Room and Project Size

Quick answer

One 12×12 room: $735–$1,750. Two-car garage, walls and ceiling: $1,100–$3,550. Whole 2,000 sq ft house: $8,400–$26,150. Per sheet: $45–$95 hung and finished.

Worked example: a Tampa living room of about 300 sq ft of wall with a popcorn ceiling. Scraping and re-skimming the ceiling at $230 per 100 sq ft is about $690, and skim-coating the walls smooth at $120 per 100 sq ft about $360, so roughly $1,050 before paint. A lab test for asbestos ($30–$75) comes first in a home built before 1980.

Whole-house math: a 2,000 sq ft house has about 7,000 sq ft of wall and ceiling. At $1.40–$3.00 per sq ft that is $8,400–$26,150 hung and finished, which is why a gut remodel's drywall line is one of its biggest. Booking the drywall and paint crews back to back saves a second round of floor protection and cleanup.

Tampa Drywall Costs by Board and Finish Type

Board or finish typeCostBest for
Standard 1/2-inch drywall$140–$300 per 100 sq ftWalls in living rooms, bedrooms and hallways. The sheet itself is $10–$20; most of the price is hanging and finishing.
5/8-inch Type X fire-rated$13–$30 per sheet (board only)Required on a garage ceiling under living space; common on the garage wall shared with the house (the code minimum there is 1/2-inch) and in furnace rooms. Heavier and stiffer, so it also resists sag on ceilings.
Moisture- and mold-resistant (green or purple board)$165–$325 per 100 sq ft installedBathrooms, laundry rooms, basements and garages. Not a tile backer inside a shower; that needs cement board.
Soundproof (QuietRock or double layer)$335–$715 per 100 sq ft installedBedroom walls next to a living room, home offices, shared walls in a duplex. The sheet alone is $30–$100.
Lightweight 1/2-inch (UltraLight)$140–$300 per 100 sq ftCeilings and DIY jobs: lighter than regular 1/2-inch board at the same price, so it is easier to lift overhead.
Level 5 smooth finish$165–$325 per 100 sq ftWalls that get glossy paint, dark colors or raking light from big windows. A thin skim coat over the whole sheet hides every joint.
Skim coat over existing walls$90–$275 per 100 sq ftSmoothing textured or damaged walls without tearing them out. Cheaper than new drywall when the old board is sound.
Plaster (repair or veneer)$140–$1,100 per repairPre-1950 homes with plaster-and-lath walls. Patching plaster costs more per square foot than drywall; replacing it with drywall is a bigger job.
Cost by board or finish type in TampaTypical range, per 100 sq ft.
Standard 1/2-inch drywall $140–$300per 100 sq ft
Lightweight 1/2-inch (UltraLight) $140–$300per 100 sq ft
Level 5 smooth finish $165–$325per 100 sq ft
Skim coat over existing walls $90–$275per 100 sq ft
Tampa tip: for a basement or bathroom, ask for moisture- and mold-resistant board ($165–$325 per 100 sq ft installed). It costs little more than standard board and saves a $275–$1,850 repair after the first leak.

Board price vs. what you pay — the Tampa drywall bill

A 4×8 sheet of 1/2-inch drywall costs $10–$20 at the store, and all the materials for a 12×12 room run $200–$400, but the room hung and finished in Tampa is $735–$1,750. The difference pays for a hanger, a finisher who comes back two or three times as coats dry, sanding, cleanup and a warranty on cracks.

Hanging board is the easy half and the one DIYers can do; a $40-a-day lift rental makes ceilings possible. Taping and finishing is the skilled half: a poor Level 4 job shows every joint once the paint goes on. If you do anything yourself, hang it and hire the finish at about $0.50–$1.50 per sq ft.

What's included in a Tampa drywall quote (and what costs extra)

A standard installed price covers the board, screws, tape, corner bead and joint compound, hanging, taping, three coats of mud, sanding to the finish level named, and a sweep-out. The headline price often leaves out:

  • Primer and paint — a separate trade in most Tampa quotes; even a bare-minimum coat of primer is extra unless listed
  • Debris haul-away — $300–$500 to dispose of old drywall from a room, or $45–$185 per 100 sq ft to tear out and remove
  • Texture — $75–$185 per 100 sq ft to apply or match; a Level 5 skim is $1.65–$3.25 per sq ft
  • Asbestos or lead testing — $30–$75 for a mail-in texture sample, $250–$850 for a professional survey, in homes built before 1980

Ask how long the company warranties cracks and nail pops; good finishers put a year in writing.

What Affects Drywall Costs in Tampa

Finish level

Level 4, the standard for painted walls, is $1.40–$3.00 per sq ft in Tampa; Level 5, a full skim coat for glossy paint or strong light, is $1.65–$3.25. Level 3 is only for heavy texture. Get the level written on the quote.

Ceilings, height and access

Ceiling board is heavier to hang and slower to finish; a 12×12 ceiling replaced runs $465–$1,400. Rooms over 8–10 ft add about 10–30%, and stairwells need scaffolding.

Repair size and count

A small hole is $70–$230, a large one $140–$415, cracks and nail pops $90–$365. Several small repairs on one visit cost far less than three separate calls at the $115–$185 minimum.

Water damage and mold

Cutting out wet board and replacing it is $275–$1,850. If mold has set in behind the wall, remediation is a separate trade at $1,500–$3,000 per 100 sq ft, and the leak has to be fixed first.

Local rules

Florida does not license drywall contractors at state level, so check your county or city license and the company's insurance before work starts in Tampa. The garage side of a wall shared with the house needs gypsum board under the building code, and a garage ceiling under living space 5/8-inch fire-rated board; bathrooms and flood-prone rooms should get moisture-resistant board ($165–$325 per 100 sq ft).

Labor rates in Tampa

Labor is about 70% of the bill. Tampa is a large metro with mid-range construction prices; a room of drywall here is about 8% below the US typical of $1,250. Drywall contractors here charge about $40–$90 an hour, with a $115–$185 minimum for small repairs.

Texture and old finishes

Matching texture adds $75–$185 per 100 sq ft; scraping popcorn $140–$415. Plaster walls in older Tampa homes cost more to patch ($140–$1,100) than drywall, and a full skim coat over them is $0.90–$2.75 per sq ft.

How to Save Money on Drywall in Tampa
  1. Bundle the small repairs.Most Tampa companies charge a $115–$185 minimum. One visit for five holes costs about the same as one visit for one hole.
  2. Specify Level 4, not Level 5.Level 4 ($1.40–$3.00 per sq ft) is right for flat and eggshell paint. Pay for Level 5 ($1.65–$3.25) only where glossy paint or raking light will show joints.
  3. Skim instead of replacing.Sound walls with ugly texture or lots of nail pops can be skim-coated for $0.90–$2.75 per sq ft, about half the price of new board, and with no demolition dust.
  4. Hang it yourself, hire the finish.Materials for a 12×12 room are $200–$400 and a lift rents for about $40 a day. Then pay a finisher about $0.50–$1.50 per sq ft for the part that shows.
  5. Fix the leak before the drywall.A $275–$1,850 water-damage repair under a live leak will be back in a month. Plumber or roofer first, drywall second, and keep the repair receipts for insurance.
  6. Get the finish level and extras in writing.Primer, texture matching, debris haul-away and moving furniture are the usual add-ons. A quote that lists them is cheaper to compare and harder to pad later.
Drywall Cost in Tampa: What the Quote Should Include

Tampa drywall companies often quote by the sheet or the square foot over the phone. Before you agree to the work, get these in writing:

  • The finish level by number (Level 4 for paint; Level 5 for smooth or glossy walls)
  • Board type and thickness for each room: 1/2-inch, 5/8-inch fire-rated, moisture-resistant, soundproof
  • Square footage or sheet count the price is based on
  • Whether primer is included, and who paints
  • Texture: match existing, apply new, or leave smooth
  • Demolition, debris haul-away and floor protection
  • Minimum charge and the number of visits (hanging, coats, sanding)
  • Warranty on cracks, nail pops and seams
Frequently asked questions — Drywall cost in Tampa
How much does drywall cost in Tampa?

$735–$1,750 to hang and finish one 12×12 room, labor and materials, and $1,150 is typical. That's $1.40–$3.00 per sq ft, or $45–$95 a sheet.

How much does drywall repair cost in Tampa?

$70–$230 for a small hole, $140–$415 for a large one, $90–$365 for cracks and nail pops, and $275–$1,850 for water damage. Most companies charge a $115–$185 minimum per visit.

What does drywall cost per square foot in Tampa?

$1.40–$3.00 per sq ft hung and finished to Level 4, labor and materials. Level 5 smooth is $1.65–$3.25; skim-coating existing walls $0.90–$2.75.

How much does it cost to fix a ceiling in Tampa?

$230–$1,100 for a sag, stain or hole, and $465–$1,400 to tear out and replace a whole 12×12 room ceiling. Water damage with the repair runs $505–$2,950.

Can I hang drywall myself?

Hanging, yes: materials for a room are $200–$400 and a lift rents for about $40 a day. Finishing is the skilled part; most DIYers hire it out at about $0.50–$1.50 per sq ft.

How much does it cost to remove a popcorn ceiling in Tampa?

$140–$415 per 100 sq ft to scrape, skim and prime an asbestos-free ceiling. Test first in any home built before 1980 ($30–$75 by mail); asbestos abatement costs far more.

How much is a skim coat in Tampa?

$0.90–$2.75 per sq ft, or $365–$735 for the walls of a 12×12 room. It smooths texture and small damage without new board, but the room must be repainted after.

Do I need a permit for drywall?

Florida does not license drywall contractors at state level, so check your county or city license and the company's insurance before work starts in Tampa. The garage side of a wall shared with the house needs gypsum board under the building code, and a garage ceiling under living space 5/8-inch fire-rated board; bathrooms and flood-prone rooms should get moisture-resistant board ($165–$325 per 100 sq ft).

How much does it cost to drywall a garage or a whole house in Tampa?

$1,100–$3,550 for a two-car garage, walls and ceiling, with fire-rated board where the code requires it. A whole 2,000 sq ft house is $8,400–$26,150 hung and finished.

What's included in a Tampa drywall quote?

Board, tape, mud, hanging, finishing to the level named, and cleanup. Often extra: primer and paint, debris haul-away ($300–$500), texture ($75–$185 per 100 sq ft) and asbestos testing in older homes.

Prices verified November 2026 · Cross-referenced against 83+ American pricing sources · See methodology

Prices for the Tampa metro area, November 2026. Outer suburbs may vary.

Our methodology
These are independent estimates built from public cost guides, dated city price pages, contractor and retailer price lists, federal producer-price and wage data. No drywall company can pay to change them, so always get a couple of quotes. Last reviewed November 2026. Read our full methodology →

Get a fair drywall quote in Tampa

Local drywall contractors · Free quotes · No obligation, no spam.

Get quotes in Tampa →Max 2 drywall contractors will contact you
Get quotes in TampaMax 2 drywall contractors · free · no spam→