Skip to content
Independent United States Cost GuidesPrices verified November 2026 · 39 trades · 195 US cities · 221+ sources For pros →
Get a fair quote

Cost guides

Plumbing & water4 trades
Electrical & energy5 trades
Renovation8 trades
Structural7 trades
Outdoor & yard7 trades
Cleaning & maintenance8 trades

More

Get a fair quote
Cost guide

How much does a carpenter cost in Palm Bay?

By Our research team · Last verified · Methodology

Updated November 2026Independently researched13 min read
Carpenter cost

Carpenter costs in Palm Bay

Palm Bay, FLChange location
Get free quotesFree · no obligation · max 2 pros
Normal range for Palm Bay, FL
$40–$105per hour

Most carpenters in Palm Bay charge $40–$105/hr and $60/hr is what most homeowners pay. Finish carpenters bill $55–$130/hr; a reach-in closet build-out costs $850–$3,450.

How we get this data
Typical
$60/hr
Low end
$25/hr
High end
$165/hr
Hourly rate
$40–$105
Day rate (8 hrs)
$320–$840
Hang a pre-hung door
$135–$460
Baseboard, per ft
$4–$10

Want an exact price for your job?

Tell us the job. Casey checks it by text, then up to 2 local carpenters send you a real quote. Free, no obligation.

Get my fair quote →
Typical carpenter price: Palm Bay vs nearby citiesTypical price, per hour. The line marks the US typical.
Tampa, FL $70/hr
Orlando, FL $65/hr
Palm Bay, FLThis guide $60/hr
Lakeland, FL $60/hr

The typical Palm Bay price is $60/hr, 20% below the US typical of $75/hr.

Where Palm Bay sits among 195 US metrosNumber of metros at each typical carpenter price, per hour.

Palm Bay's price band

Palm Bay is cheaper than 84% of the 195 US metros we price for carpenter work.

Expect $40–$105/hr for a carpenter in Palm Bay, with $60/hr the going rate. Finish work costs more per hour than framing: a trim carpenter bills $55–$130/hr, a framer $35–$75/hr. By the job, crown molding is $6–$14 a foot and an exterior entry door $570–$2,300 installed.

Palm Bay is a smaller market. Carpenters in the Palm Bay-Melbourne-Titusville metro earn a median $47,770 a year in federal wage data, about 21% below the US median of $60,580, and since an hourly rate is almost all labor, the going rate here lands about 20% below the US typical of $75/hr.

Check your state contractor board for the dollar line above which a carpenter must hold a contractor license or registration, and ask your city building department whether the job needs a permit — framing, decks, stairs and structural repair usually do; trim, doors and closets usually do not. This is general information, not legal advice.

Comparing cities, or after the US-wide picture? See the national guide: Carpenter cost in the USA.

Quick answer

$40–$105/hr for a carpenter in Palm Bay — typically $60/hr, or $320–$840 for a full day. Hanging a pre-hung door is $135–$460, baseboard $4–$10 a foot installed, and a reach-in closet build-out $850–$3,450. Verified November 2026. Get free Palm Bay quotes →

  • Carpenter: $40–$105/hr ($60/hr typical); day rate $320–$840
  • Finish carpenter $55–$130/hr; framer $35–$75/hr; minimum $90–$330
  • Baseboard $4–$10/ft; crown molding $6–$14/ft installed
  • Hang a pre-hung door $135–$460; exterior entry door $570–$2,300 installed
  • Reach-in closet $850–$3,450; built-ins $230–$875/linear ft; pergola $2,350–$7,200

Prices verified November 2026 · Cross-referenced against 24+ American pricing sources · See methodology

Detailed pricing — Carpenter cost in Palm Bay 2026

Labor with fasteners and basic supplies included; rows marked installed include standard paint-grade material. Palm Bay metro, re-verified November 2026. Painting new trim, permits and premium hardwood are extra.

ServiceLowTypicalHigh
Carpenter hourly rate (labor, standard hours)/hr$40/hr$60$105
Carpenter day rate (8 hours, one carpenter)per day$320per day$480$840
Baseboard, installed (labor and primed MDF or pine), per linear ftper linear ft$4per linear ft$6$10
Door and window casing, installed, per linear ftper linear ft$4per linear ft$6$10
Crown molding, installed, per linear ftper linear ft$6per linear ft$9$14
Wainscoting or board-and-batten, installed, per sq ft of wallper sq ft$9per sq ft$17$35
Hang a pre-hung interior door (labor only, your door)per door$135per door$250$460
Interior door, installed, mid-range pre-hung door includedper door$235per door$400$760
Exterior entry door, installed (steel or fiberglass door included)per door$570per door$1,200$2,300
Door repair or rehang (sticking, sagging, loose frame)per job$90per job$170$335
Wood window repair (sash, sill or rotted trim)per job$135per job$280$555
Framing, labor and lumber, per sq ft of floor area (walls, not roof)per sq ft$7per sq ft$11$18
Deck building labor, per sq ft (framing and decking, materials extra)per sq ft$7per sq ft$12$20
Deck repair (replace boards, a joist or a railing section)per job$275per job$780$2,150
Stair repair (squeaky or loose tread, baluster, newel)per job$135per job$335$1,050
Stair handrail or railing, installed, per linear ftper linear ft$18per linear ft$35$80
Reach-in closet build-out (shelves, rods and drawers, installed)per closet$850per closet$1,650$3,450
Walk-in closet system, installedper closet$2,350per closet$4,550$9,100
Closet doors (bifold or bypass), replacedper opening$185per opening$355$760
Extra drawer unit in a closet or built-inper drawer$95per drawer$160$230
Custom built-ins (bookcase, entertainment wall), installed, per linear ftper linear ft$230per linear ft$435$875
Shelving installation (floating or wall shelves, a few)per job$135per job$295$680
Rot or structural repair (sill plate, rim joist, fascia or post)per job$460per job$1,300$3,500
Pergola, 10 × 12 ft wood, built on siteper pergola$2,350per pergola$4,050$7,200
carpenter jobs in Palm Bay: what they costPer job, low to high with the typical price marked. Every line is in the table above.
Rot or structural repair (sill plate, rim joist, fascia or post) $1,300$460–$3,500
Deck repair (replace boards, a joist or a railing section) $780$275–$2,150
Stair repair (squeaky or loose tread, baluster, newel) $335$135–$1,050
Shelving installation (floating or wall shelves, a few) $295$135–$680
Wood window repair (sash, sill or rotted trim) $280$135–$555
Door repair or rehang (sticking, sagging, loose frame) $170$90–$335
Already got a quote?
Check it against these Palm Bay prices — free, no sign-up.
$

Got it as a PDF or photo? Upload up to 3 quotes and compare →

Free quotes

Get free quotes from up to 2 local carpenters in Palm Bay

Free · No obligation · About a minute

  1. 1The job
  2. 2Budget
  3. 3Your details
Casey · LocalGoingRate

What do you need a carpenter for?

Tap one to start.

Prices verified November 2026 · Cross-referenced against 24+ American pricing sources · See methodology

Figures are for the Palm Bay metro area. Trip charges can apply on the far edges; parking and old, out-of-square buildings in Melbourne — Downtown & Eau Gallie cost the most.

How carpenter costs vary across Palm Bay

Carpenter rates across Palm Bay

Where you live changes the labor, not the lumber. Older homes in Melbourne — Downtown & Eau Gallie take the longest; rates in Titusville & Vero Beach sit near the city typical, with bigger jobs.

Carpenter prices across Palm BayTypical range by part of the metro, per hour. The line marks the Palm Bay typical.
Melbourne — Downtown & Eau Gallie8–12% above the city average $45–$120
Palm BayStandard pricing $40–$105
Cocoa & RockledgeStandard to 6% above $40–$110
Titusville & Vero BeachStandard; bigger jobs, more driving $40–$110

Melbourne — Downtown & Eau Gallie

8–12% above the city average
Downtown Melbourne, Eau Gallie, Indialantic
Hourly
$45–$120/hr
Day rate
$345–$940 / day rate

The priciest part of the metro for a carpenter's visit: parking, elevators to book and out-of-square old walls that make every piece of trim a custom cut.

Palm Bay

Standard pricing
Palm Bay, Port Malabar, Bayside Lakes
Hourly
$40–$105/hr
Day rate
$320–$840 / day rate

Residential streets with average pricing. Bundling several small jobs into one visit is the easiest way to save here.

Cocoa & Rockledge

Standard to 6% above
Cocoa, Rockledge, Merritt Island
Hourly
$40–$110/hr
Day rate
$330–$890 / day rate

Lots of fix-and-flip and whole-house remodels, so finish carpenters are busy here. Quotes vary widely; get two, and make sure both say who paints and fills the trim.

Titusville & Vero Beach

Standard; bigger jobs, more driving
Titusville, Vero Beach, Sebastian
Hourly
$40–$110/hr
Day rate
$320–$865 / day rate

Mostly single-family homes with garages, decks and bigger closets. Trim packages, built-ins, pergolas and deck repairs are the common jobs, and some carpenters add a trip fee for distance.

What you'll actually pay — job by job

Real-world carpentry costs in Palm Bay

Here's what common carpenter jobs cost in Palm Bay in 2026, labor, fasteners and basic supplies included.

One quick fix — a sticking or sagging door

$90–$335

Planing an edge, shimming a hinge or resetting a strike plate takes under an hour, but most Palm Bay carpenters charge a minimum of $90–$330. Priced as a flat job it is $90–$335. Add a second small job to the same visit and the minimum stops hurting.

Trim out a 12 × 12 bedroom — baseboard, crown, one door and one window

$650–$1,500

About 45 ft of baseboard ($180–$450), 48 ft of crown ($290–$670), casing on the door ($70–$170) and the window ($110–$210) comes to $650–$1,500 in Palm Bay, with primed MDF or pine. Filling, caulking and painting the trim is usually a separate line or a painter's job.

Replace three interior doors and fix a fourth

$795–$2,615

Three mid-range pre-hung doors installed at $400 each plus one repair at $170 is about $1,370. If the old doors are odd sizes — common in homes built before 1950 — the carpenter may have to trim or build out jambs, which pushes each door toward $760.

Reach-in closet build-out with two extra drawers

$1,040–$3,910

Shelves, a double hanging rod and a shoe rack in a standard 6–8 ft reach-in run $850–$3,450 in Palm Bay; two drawer units add $160 each, for about $1,970. A walk-in closet system is $2,350–$9,100.

Rotted rim joist and a deck repair

$735–$5,650

Cutting out a rotted sill or rim joist and sistering new lumber is $460–$3,500 depending on how far the rot runs; replacing a few deck boards and a railing section is $275–$2,150. Together about $2,080. Anything load-bearing may need a permit in Palm Bay, and the carpenter should say so before starting.

How much does a carpenter cost in Palm Bay?

$40–$105/hr, and $60/hr is the number most Palm Bay homeowners see. On small jobs the minimum matters more than the rate: a $165 minimum decides the bill for a 30-minute door fix, which is why most carpenters quote flat prices for doors, trim and closets instead.

By the job, Palm Bay carpenters charge $135–$460 to hang a pre-hung door, $4–$10 a foot for baseboard and $6–$14 a foot for crown molding, so trimming out a 12 × 12 bedroom runs $650–$1,500. Figures re-checked against 24 sources in November 2026.

Carpenter rates and fees in Palm Bay (2026)

Standard rates run $40–$105/hr, a full day $320–$840, and the minimum charge for a small job $90–$330.

Line on the quoteLowTypicalHigh
Standard hourly rate (general carpenter)$40$60$105
Finish or trim carpenter, hourly$55$80$130
Framing carpenter, hourly$35$50$75
Master carpenter, hourly$70$100$165
Minimum charge for a small job$90$165$330
Service call (1–1.5 hours of the rate)$40$75$160
Half day (4 × the hourly rate)$160$240$420
Full day (8 × the hourly rate)$320$480$840

One visit vs one day in Palm Bay: a single quick fix costs the $90–$330 minimum, while $320–$840 buys eight hours. If your list has four or five jobs on it, price the day.

What moves a carpentry quote in Palm Bay:

  • Finish or rough — framing bills $35–$75/hr and is priced per square foot; finish work bills $55–$130/hr because every joint shows.
  • The minimum — most carpenters charge $90–$330 for any visit, so a 30-minute door fix costs far more per minute than a day of trim.
  • Materials — paint-grade MDF or finger-joint pine is the cheap case; stain-grade oak, poplar or hardwood trim can double the material line, plus a 10–20% markup if the carpenter buys it.
  • The age of the house — out-of-square openings, plaster walls and odd-size doors in Palm Bay add hours; new construction in Titusville & Vero Beach goes fast.
  • Permits — trim, doors and closets need none; framing, load-bearing changes, decks and stairs usually do, and the permit plus any structural drawings add $50–$500 and up.

Ask every Palm Bay carpenter the same five things: hourly or flat, the minimum charge, who buys the lumber and at what markup, whether filling, caulking and painting are included, and who pulls the permit if one is needed. Get a quote for your carpentry job →

Carpenter cost in Palm Bay by job size

Quick answer

One small fix is $90–$330 (the minimum charge), a half day $160–$420, a full day $320–$840. A whole-room trim package is $650–$1,500, a reach-in closet $850–$3,450, a pergola $2,350–$7,200.

Worked example: trimming out a 12 × 12 bedroom in Palm Bay. About 45 ft of baseboard at $6 a foot ($270), 48 ft of crown at $9 ($430), casing on one door ($100) and one window ($150) comes to about $950 with primed material, before paint.

A bigger job: framing the walls of a 12 × 12 room at $11 a square foot with lumber is about $1,600, and a 10 × 12 wood pergola is $4,050 typical. The pergola costs more per hour of work because the lumber, hardware and footings are in the price; framing is mostly labor.

Who to hire in Palm Bay and what each carpenter costs

Who to hireCostBest for
General carpenter (journeyman)$45–$80/hrDoors, trim, decks, repairs and most everyday jobs. The rate most homeowners see.
Finish or trim carpenter$55–$130/hrBaseboard, casing, crown molding, wainscoting and stairs where the joints show. Slower and neater than a framer.
Framing (rough) carpenter$35–$75/hrWalls, floors, decks and additions, usually priced per square foot ($7–$18) rather than by the hour.
Cabinetmaker or built-ins specialist$65–$105/hrCustom bookcases, entertainment walls and closets, usually quoted per linear foot ($230–$875).
Master carpenter$70–$165/hrComplex stairs, curved work, historic trim profiles and jobs where nothing is standard.
Apprentice or helper$30–$45/hrBilled alongside a lead carpenter on bigger jobs. A two-person framing crew runs $70–$125/hr.
Handyman doing carpentry$40–$80/hrRehanging a door, a few feet of baseboard, a loose railing. Not for structural work or anything that needs a permit.
Day rate (8 hours, one carpenter)$320–$840 per dayA list of small jobs, a trim package or a two-day build. Cheaper than several separate visits.
Cost by who to hire in Palm BayTypical range, per hour.
General carpenter (journeyman) $45–$80
Finish or trim carpenter $55–$130
Framing (rough) carpenter $35–$75
Cabinetmaker or built-ins specialist $65–$105
Master carpenter $70–$165
Apprentice or helper $30–$45
Handyman doing carpentry $40–$80
Palm Bay tip: for trim, stairs and built-ins, pay the finish carpenter's rate ($55–$130/hr). For walls, decks and framing, a framer at $35–$75/hr is the right hire.

Hourly rate vs what you actually pay — the Palm Bay carpentry bill

A $60/hr rate rarely shows up as $60 on the invoice. Most Palm Bay carpenters charge a $90–$330 minimum, so fixing one door costs $90–$335 as a flat job. Trim is priced by the foot — $4–$10 for baseboard, $6–$14 for crown — and the per-foot price already includes the material, the cuts, the nailing and the drive, which is why it works out to more than the hourly rate alone.

Compare flat prices, not hourly headlines. Two quotes for a 12 × 12 bedroom's trim ($650–$1,500 here) can differ by a third depending on whether one includes the material, the filling and caulking, and hauling the old trim away. Ask what is in each line before you compare the totals.

What's included in a Palm Bay carpenter's quote (and what costs extra)

A standard carpentry quote covers labor, fasteners, glue and shims, cutting and fitting, and cleanup of the work area. Often left out:

  • Materials — lumber, trim, doors and hardware, plus a 10–20% markup if the carpenter buys them
  • Filling, caulking and painting — new trim usually arrives primed; painting it is $1–$4 a foot extra or a painter's job
  • Service call and the minimum — a service call is billed as $40–$160; $90–$330 minimum on a short visit
  • Permits and drawings — $50–$500 for a permit on framing, decks or stairs; $250–$1,000 for structural drawings on a load-bearing change

Ask for the price in writing before work starts, and for proof of liability insurance.

What affects carpenter costs in Palm Bay

Finish or rough work

Framing carpenters in Palm Bay bill $35–$75/hr, or $7–$18 a square foot with lumber. Finish carpenters bill $55–$130/hr because trim, stairs and built-ins show every cut.

Minimums and travel

Most carpenters charge a $90–$330 minimum, and a service call is billed as $40–$160 — one to one and a half hours of the rate — before the work starts.

Materials and markup

Primed MDF baseboard costs a few dollars a foot; stain-grade hardwood several times that. If the carpenter buys the lumber, expect the receipt plus a 10–20% markup. An interior door itself runs $30–$350 at the home center before labor.

Who does the work

A handyman doing light carpentry bills $40–$80/hr; a journeyman carpenter $45–$80/hr; a master $70–$165/hr. Pay for the skill the job needs — a sagging door does not need a master, a curved stair does.

Licensing and permits

Check your state contractor board for the dollar line above which a carpenter must hold a contractor license or registration, and ask your city building department whether the job needs a permit — framing, decks, stairs and structural repair usually do; trim, doors and closets usually do not.

Labor rates in Palm Bay

Carpenters in the Palm Bay-Melbourne-Titusville metro earn a median $47,770 a year in federal wage data, about 21% below the US median. An hourly rate is almost all labor, so Palm Bay prices land about 20% below the US typical of $75/hr.

The age of the house

Homes built before 1950 rarely have square openings or standard door sizes, and plaster walls crack when trim is nailed. Expect more hours in Palm Bay and Melbourne — Downtown & Eau Gallie; newer homes in Titusville & Vero Beach go faster.

How to save on a carpenter in Palm Bay
  1. Batch small jobs into one visit.One $165 minimum can cover a door fix, a loose railing and a few feet of trim. Write a list before the carpenter arrives.
  2. Book a day rate for long lists.A full day in Palm Bay is $320–$840. A trim package or four or five small jobs often costs less this way than flat prices one at a time.
  3. Choose paint-grade trim.Primed MDF or finger-joint pine baseboard costs a fraction of stain-grade oak and installs faster. Baseboard runs $4–$10 a foot installed here; hardwood can double the material line.
  4. Buy the doors and hardware yourself.An interior door costs $30–$350 at the home center. Supplying it skips the markup and the store run; labor to hang a pre-hung door is $135–$460.
  5. Get the finish line in writing.Ask whether filling nail holes, caulking and painting the trim are in the price. Many carpenters leave trim primed and unpainted, and a painter charges extra to finish it.
  6. Keep structural work permitted.Don't pay a carpenter to skip a permit on framing, a deck or a stair in Florida. A failed inspection or an insurance denial costs more than the permit.
What a carpenter's quote in Palm Bay should include

Palm Bay carpenters quote by the hour, by the foot or by the job. Before you pay a deposit, get these in writing:

  • The carpenter's name, business name and proof of liability insurance
  • Hourly rate plus the minimum charge, or a flat price per job
  • Each job on its own line — doors, trim per foot, closets, repairs
  • Materials: species and grade (paint-grade MDF, pine, poplar, oak), who buys them and at what markup
  • Whether filling, caulking and painting the trim are included
  • Removal and disposal of old trim, doors or rotted lumber
  • Whether the job needs a permit, and who pulls it
  • Start and finish dates, payment stages and the warranty on the work
Frequently asked questions — Carpenter cost in Palm Bay
How much does a carpenter cost per hour in Palm Bay?

$40–$105/hr, and $60/hr is typical. Framers bill $35–$75/hr, finish carpenters $55–$130/hr, and most charge a $90–$330 minimum.

What is a carpenter's day rate in Palm Bay?

About $320–$840 for 8 hours, before materials. It is the cheapest way to clear a list of small jobs or a trim package; a single service call is billed as $40–$160.

How much does it cost to install baseboard or crown molding in Palm Bay?

Baseboard is $4–$10 a linear foot installed with primed material, crown molding $6–$14. A 12 × 12 room's baseboard runs $180–$450; its crown $290–$670.

How much does it cost to hang a door in Palm Bay?

$135–$460 labor to hang a pre-hung interior door you supply, or $235–$760 with a mid-range door included. An exterior entry door installed is $570–$2,300.

How much is framing per square foot in Palm Bay?

$7–$18 per square foot of floor area with lumber, for walls. Framing a 12 × 12 room is about $1,000–$2,600; a single interior wall with drywall $925–$4,350.

How much do custom closets and built-ins cost in Palm Bay?

A reach-in closet build-out is $850–$3,450, a walk-in system $2,350–$9,100, and custom built-ins $230–$875 per linear foot installed.

Do I need a licensed carpenter in Florida?

Check your state contractor board for the dollar line above which a carpenter must hold a contractor license or registration, and ask your city building department whether the job needs a permit — framing, decks, stairs and structural repair usually do; trim, doors and closets usually do not.

Do I need a permit for carpentry work?

Not for trim, doors, closets, shelving or like-for-like repairs. Framing, moving or removing a wall, new window or door openings, decks over a small size, stairs and structural rot repair usually need a building permit, and a load-bearing change may need drawings from a licensed structural engineer. Ask the carpenter who pulls it. This is general information, not legal advice.

Is it cheaper to pay a carpenter by the hour or by the job?

For one clear job — a door, a run of trim, a closet — a flat price is usually cheaper and safer. For a long list, a day rate ($320–$840) costs less than paying $90–$330 minimums one visit at a time.

Does a carpenter supply the lumber and doors?

Most will, at cost plus a 10–20% markup, and some charge for the trip. You can save by buying doors ($30–$350 each for the door itself) and hardware yourself; let the carpenter pick the trim stock so the profiles match.

Prices verified November 2026 · Cross-referenced against 24+ American pricing sources · See methodology

Prices for the Palm Bay metro area, November 2026. Outer suburbs may vary.

Our methodology
These are independent estimates built from published cost guides, platform price data, dated city price pages, home-center material prices and federal wage data. No carpenter can pay to change them, so always get two or three quotes. Last reviewed November 2026. Read our full methodology →

Get a fair carpenter quote in Palm Bay

Local carpenters · Free quotes · No obligation, no spam.

Get quotes in Palm Bay →Max 2 carpenters will contact you
Get quotes in Palm BayMax 2 carpenters · free · no spam→