Skip to content
Independent United States Cost GuidesPrices verified November 2026 · 39 trades · 195 US cities · 221+ sources For pros →
Get a fair quote

Cost guides

Plumbing & water4 trades
Electrical & energy5 trades
Renovation8 trades
Structural7 trades
Outdoor & yard7 trades
Cleaning & maintenance8 trades

More

Get a fair quote
Cost guide

How much does drywall cost in Myrtle Beach?

By Our research team · Last verified · Methodology

Updated November 2026Independently researched11 min read
Drywall cost

Drywall costs in Myrtle Beach

Myrtle Beach, SCChange location
Get free quotesFree · no obligation · max 2 pros
Normal range for Myrtle Beach, SC
$690–$1,650per room

Drywalling a 12×12 room in Myrtle Beach costs $690–$1,650 per room, walls and ceiling. Most homeowners here pay about $1,050. A small patch is $65–$215; water-damage repair $260–$1,700.

How we get this data
Typical
$1,050
Low end
$475
High end
$2,600
Per 12×12 room
$690–$1,650
Per sq ft (hang + finish)
$1.35–$2.85
Small hole patch
$65–$215
Water-damage repair
$260–$1,700

Want an exact price for your job?

Tell us the job. Casey checks it by text, then up to 2 local drywall contractors send you a real quote. Free, no obligation.

Get my fair quote →
Typical drywall price: Myrtle Beach vs nearby citiesTypical price, per room. The line marks the US typical.
Raleigh, NC $1,150
Columbia, SC $1,100
Myrtle Beach, SCThis guide $1,050
Charlotte, NC $1,000

The typical Myrtle Beach price is $1,050, 16% below the US typical of $1,250.

Where Myrtle Beach sits among 195 US metrosNumber of metros at each typical drywall price, per room.

Myrtle Beach's price band

Myrtle Beach is cheaper than 91% of the 195 US metros we price for drywall work.

Drywalling one 12×12 room in Myrtle Beach costs $690–$1,650, and $1,050 is what most homeowners pay. Repairs are the most common call: $65–$215 for a small hole, $215–$1,050 for a ceiling stain or sag. A whole 2,000 sq ft house runs $8,000–$24,850.

Myrtle Beach is a smaller market. Board, mud and tape cost about the same everywhere; what changes here is the hourly rate, how busy local crews are and how many old plaster walls they run into.

Every installed price here covers board, hanging, taping, mud and sanding to a Level 4 finish. Painting is a separate trade, and repairs under about $170 usually hit a company's minimum charge.

Comparing cities, or after the US-wide picture? See the national guide: Drywall cost in the USA.

Quick answer

$690–$1,650 to hang and finish drywall in one 12×12 room in Myrtle Beach, labor and materials — typically $1,050. That's $1.35–$2.85 per sq ft or $45–$90 a sheet; a small hole patch is $65–$215 and water-damage repair $260–$1,700. Verified November 2026. Get free Myrtle Beach quotes →

  • One 12×12 room hung and finished: $690–$1,650 ($1,050 typical)
  • Per sq ft $1.35–$2.85; per sheet $45–$90
  • Small hole $65–$215; large hole $130–$385; water damage $260–$1,700
  • Skim coat $0.85–$2.60 per sq ft; popcorn removal $130–$385 per 100 sq ft
  • Priciest area to work in: Downtown Myrtle Beach & the Boardwalk; lowest quotes: Conway

Prices verified November 2026 · Cross-referenced against 83+ American pricing sources · See methodology

Detailed pricing — Drywall cost in Myrtle Beach 2026

Installed prices include labor and materials to a paint-ready finish; repairs are per job including the visit. Myrtle Beach metro, re-verified November 2026.

ServiceLowTypicalHigh
Hang and finish drywall, one 12×12 room (walls and ceiling, about 500 sq ft)per room$690per room$1,050$1,650
Drywall contractor hourly rate/hr$40/hr$60$85
Hang and finish, standard Level 4 finish, per 100 sq ft (labor and materials)per 100 sq ft$135per 100 sq ft$200$285
Level 5 smooth finish on new drywall, per 100 sq ftper 100 sq ft$155per 100 sq ft$245$310
One 4×8 sheet of 1/2-inch drywall, hung and finishedper sheet$45per sheet$60$90
Small hole or dent repair (under 4 in.), one visitper job$65per job$130$215
Large hole repair (6–12 in., new piece let in and finished)per job$130per job$235$385
Cracks, nail pops and seam repairper job$85per job$170$345
Water-damaged drywall: cut out, replace and finishper job$260per job$775$1,700
Ceiling drywall repair (sag, stain or hole)per job$215per job$515$1,050
Replace a 12×12 room ceiling: tear out, new drywall, finishedper room$435per room$785$1,300
Skim coat existing walls to a smooth finish, per 100 sq ftper 100 sq ft$85per 100 sq ft$110$260
Skim coat one 12×12 room, walls onlyper room$345per room$475$690
Wall texture (orange peel, knockdown, skip trowel), per 100 sq ftper 100 sq ft$70per 100 sq ft$115$175
Popcorn ceiling removal and re-skim (no asbestos), per 100 sq ftper 100 sq ft$130per 100 sq ft$215$385
Corner bead repair or replacement (one damaged outside corner)per corner$65per corner$130$260
New partition wall, framed and drywalled both sides (8 ft high), per linear ftper linear ft$20per linear ft$40$70
Soundproof drywall (QuietRock or double 5/8-inch layer), per 100 sq ft installedper 100 sq ft$320per 100 sq ft$480$685
Moisture- and mold-resistant drywall (green or purple board), per 100 sq ft installedper 100 sq ft$155per 100 sq ft$220$310
Drywall a 2-car garage, walls and ceiling (5/8-inch fire-rated where code requires)per garage$1,050per garage$1,950$3,350
Drywall a whole 2,000 sq ft house (about 7,000 sq ft of board), hung and finishedper house$8,000per house$13,300$24,850
Remove and dispose of old drywall, per 100 sq ftper 100 sq ft$45per 100 sq ft$85$175
Plaster wall or ceiling repair (cracks, holes, loose plaster)per job$130per job$345$1,050
Drywall crew day rate (two people, materials extra)per day$600per day$945$1,400
drywall jobs in Myrtle Beach: what they costPer 100 sq ft, low to high with the typical price marked. Every line is in the table above.
Soundproof drywall (QuietRock or double 5/8-inch layer), per 100 sq ft installed $480$320–$685
Level 5 smooth finish on new drywall, per 100 sq ft $245$155–$310
Moisture- and mold-resistant drywall (green or purple board), per 100 sq ft installed $220$155–$310
Popcorn ceiling removal and re-skim (no asbestos), per 100 sq ft $215$130–$385
Hang and finish, standard Level 4 finish, per 100 sq ft (labor and materials) $200$135–$285
Wall texture (orange peel, knockdown, skip trowel), per 100 sq ft $115$70–$175
Skim coat existing walls to a smooth finish, per 100 sq ft $110$85–$260
Remove and dispose of old drywall, per 100 sq ft $85$45–$175
Already got a quote?
Check it against these Myrtle Beach prices — free, no sign-up.
$

Got it as a PDF or photo? Upload up to 3 quotes and compare →

Free quotes

Get free quotes from up to 2 local drywall contractors in Myrtle Beach

Free · No obligation · About a minute

  1. 1The job
  2. 2Budget
  3. 3Your details
Casey · LocalGoingRate

What do you need a price on?

Tap one to start.

Prices verified November 2026 · Cross-referenced against 83+ American pricing sources · See methodology

Figures are for the Myrtle Beach metro area. Trip fees can apply on the far edges; apartments and pre-war buildings in Downtown Myrtle Beach & the Boardwalk cost the most to work in.

How drywall costs vary across Myrtle Beach

Drywall prices across Myrtle Beach

Same sheets, four price bands. Parking, access and older walls push Downtown Myrtle Beach & the Boardwalk to the top; Conway sits at or below the city typical.

Drywall prices across Myrtle BeachTypical range by part of the metro, per room. The line marks the Myrtle Beach typical.
Downtown Myrtle Beach & the Boardwalk8–12% above the city average $745–$1,850per room
Conway3–5% below $655–$1,600per room
North Myrtle Beach & Carolina ForestStandard pricing $690–$1,650per room
Surfside, Murrells Inlet & GeorgetownStandard; bigger rooms common $690–$1,700per room

Downtown Myrtle Beach & the Boardwalk

8–12% above the city average
Downtown, Boardwalk, Arts & Innovation District
Per 12×12 room
$745–$1,850 per room
Typical repair
$140–$430 / large hole patch

Older buildings, parking and elevators slow every visit, and where the walls are plaster rather than drywall, patches take longer and cost more.

Conway

3–5% below
Conway, Coastal Carolina University
Per 12×12 room
$655–$1,600 per room
Typical repair
$125–$375 / large hole patch

Lots of rental housing and turnover repairs: holes, nail pops and repaints. Simple jobs keep most quotes at or below the city typical.

North Myrtle Beach & Carolina Forest

Standard pricing
North Myrtle Beach, Carolina Forest, Socastee
Per 12×12 room
$690–$1,650 per room
Typical repair
$130–$385 / large hole patch

Established neighborhoods of single-family homes. Most calls are a patch, a water stain or one room at the city's going rate.

Surfside, Murrells Inlet & Georgetown

Standard; bigger rooms common
Surfside Beach, Murrells Inlet, Georgetown, Pawleys Island
Per 12×12 room
$690–$1,700 per room
Typical repair
$130–$395 / large hole patch

Newer homes with easy access and drywall throughout. Visits are quick; the bigger bills are garages, additions and whole-house repaints after a skim coat.

What you'll actually pay — job by job

Real-World Drywall Costs in Myrtle Beach

Here's what common drywall jobs cost in Myrtle Beach in 2026, labor and materials to a paint-ready finish.

Doorknob hole in a bedroom wall — 1 visit, 1–2 hours

$65–$215

Cut a clean square, screw in a backer, let in a patch, tape and mud in two or three coats, sand. Most Myrtle Beach companies charge their $105–$170 minimum for a single patch, so add other holes to the same visit.

Ceiling stain and sag after a bathroom leak

$475–$2,750

Water-damaged board cut out and replaced ($260–$1,700) plus the ceiling repair and texture match ($215–$1,050). Fix the leak first; the drywall company won't warranty a patch under a live drip.

Drywall one 12×12 room (garage conversion, addition or basement) — 2–4 days

$690–$1,650

Walls and ceiling hung and finished to Level 4 for $1,050 typical, about 15 sheets. Moisture-resistant board for a bathroom or basement adds about $20 per 100 sq ft; paint is separate.

Scrape a popcorn ceiling in a living room (about 300 sq ft)

$390–$1,155

Scrape, skim smooth and prime at $130–$385 per 100 sq ft. In a home built before 1980, a lab test ($30–$75) comes first; if it's positive, abatement is a different trade at a much higher price.

Skim coat a textured bedroom smooth

$345–$690

Two thin coats of compound over the walls of a 12×12 room, sanded to Level 5, at $0.85–$2.60 per sq ft. The ceiling adds $100–$150 per 100 sq ft, and new paint is a must afterwards.

How much does drywall cost in Myrtle Beach?

Between $690 and $1,650 for one 12×12 room, walls and ceiling, hung and finished ready for paint, and $1,050 is the price most Myrtle Beach homeowners pay. The board is cheap: about $10–$20 a sheet, or $200–$400 in materials for the whole room. The rest is two or three visits by a hanger and a finisher, and the finishing is what you're paying for.

Bigger jobs scale by the square foot: $1,050–$3,350 for a two-car garage, $8,000–$24,850 for a whole 2,000 sq ft house. Skim-coating existing walls smooth is $0.85–$2.60 per sq ft, about half the price of new board. Figures re-checked against 83 sources in November 2026.

Drywall prices in Myrtle Beach (2026): new board, repairs and finishes

Hang and finish costs $1.35–$2.85 per sq ft in Myrtle Beach, a small hole patch $65–$215, and a skim coat $0.85–$2.60 per sq ft.

Line on the quoteLowTypicalHigh
Hang and finish, standard Level 4 finish, per 100 sq ft (labor and materials)$135$200$285
One 4×8 sheet of 1/2-inch drywall, hung and finished$45$60$90
Small hole or dent repair (under 4 in.), one visit$65$130$215
Large hole repair (6–12 in., new piece let in and finished)$130$235$385
Water-damaged drywall: cut out, replace and finish$260$775$1,700
Replace a 12×12 room ceiling: tear out, new drywall, finished$435$785$1,300
Skim coat existing walls to a smooth finish, per 100 sq ft$85$110$260
Popcorn ceiling removal and re-skim (no asbestos), per 100 sq ft$130$215$385

The board is the cheap bit. A sheet is $10–$20 on its own; the Myrtle Beach price of $45–$90 hung and finished is mostly a finisher's time over two or three visits while coats dry.

What moves a drywall quote in Myrtle Beach:

  • Finish level — Level 4 for painted walls is $1.35–$2.85 per sq ft; a Level 5 smooth finish $1.55–$3.10.
  • Ceilings and height — ceiling board is slower to hang; rooms over 8–10 ft add about 10–30%.
  • Board type — moisture-resistant board is $155–$310 per 100 sq ft installed; soundproof $320–$685.
  • Texture — matching orange peel or knockdown adds $70–$175 per 100 sq ft; scraping popcorn $130–$385.
  • Minimum charge — a single small patch costs $65–$215 because most companies charge a $105–$170 minimum visit.

Ask every Myrtle Beach company for the same five things: the finish level by number, whether primer is included, who hauls the debris, how texture will be matched, and the minimum charge. Compare those, not the headline price. Get a quote for your drywall job →

Drywall Cost in Myrtle Beach by Room and Project Size

Quick answer

One 12×12 room: $690–$1,650. Two-car garage, walls and ceiling: $1,050–$3,350. Whole 2,000 sq ft house: $8,000–$24,850. Per sheet: $45–$90 hung and finished.

Worked example: a Myrtle Beach living room of about 300 sq ft of wall with a popcorn ceiling. Scraping and re-skimming the ceiling at $215 per 100 sq ft is about $645, and skim-coating the walls smooth at $110 per 100 sq ft about $330, so roughly $975 before paint. A lab test for asbestos ($30–$75) comes first in a home built before 1980.

Whole-house math: a 2,000 sq ft house has about 7,000 sq ft of wall and ceiling. At $1.35–$2.85 per sq ft that is $8,000–$24,850 hung and finished, which is why a gut remodel's drywall line is one of its biggest. Booking the drywall and paint crews back to back saves a second round of floor protection and cleanup.

Myrtle Beach Drywall Costs by Board and Finish Type

Board or finish typeCostBest for
Standard 1/2-inch drywall$135–$285 per 100 sq ftWalls in living rooms, bedrooms and hallways. The sheet itself is $10–$20; most of the price is hanging and finishing.
5/8-inch Type X fire-rated$13–$30 per sheet (board only)Required on a garage ceiling under living space; common on the garage wall shared with the house (the code minimum there is 1/2-inch) and in furnace rooms. Heavier and stiffer, so it also resists sag on ceilings.
Moisture- and mold-resistant (green or purple board)$155–$310 per 100 sq ft installedBathrooms, laundry rooms, basements and garages. Not a tile backer inside a shower; that needs cement board.
Soundproof (QuietRock or double layer)$320–$685 per 100 sq ft installedBedroom walls next to a living room, home offices, shared walls in a duplex. The sheet alone is $30–$100.
Lightweight 1/2-inch (UltraLight)$135–$285 per 100 sq ftCeilings and DIY jobs: lighter than regular 1/2-inch board at the same price, so it is easier to lift overhead.
Level 5 smooth finish$155–$310 per 100 sq ftWalls that get glossy paint, dark colors or raking light from big windows. A thin skim coat over the whole sheet hides every joint.
Skim coat over existing walls$85–$260 per 100 sq ftSmoothing textured or damaged walls without tearing them out. Cheaper than new drywall when the old board is sound.
Plaster (repair or veneer)$130–$1,050 per repairPre-1950 homes with plaster-and-lath walls. Patching plaster costs more per square foot than drywall; replacing it with drywall is a bigger job.
Cost by board or finish type in Myrtle BeachTypical range, per 100 sq ft.
Standard 1/2-inch drywall $135–$285per 100 sq ft
Lightweight 1/2-inch (UltraLight) $135–$285per 100 sq ft
Level 5 smooth finish $155–$310per 100 sq ft
Skim coat over existing walls $85–$260per 100 sq ft
Myrtle Beach tip: for a basement or bathroom, ask for moisture- and mold-resistant board ($155–$310 per 100 sq ft installed). It costs little more than standard board and saves a $260–$1,700 repair after the first leak.

Board price vs. what you pay — the Myrtle Beach drywall bill

A 4×8 sheet of 1/2-inch drywall costs $10–$20 at the store, and all the materials for a 12×12 room run $200–$400, but the room hung and finished in Myrtle Beach is $690–$1,650. The difference pays for a hanger, a finisher who comes back two or three times as coats dry, sanding, cleanup and a warranty on cracks.

Hanging board is the easy half and the one DIYers can do; a $40-a-day lift rental makes ceilings possible. Taping and finishing is the skilled half: a poor Level 4 job shows every joint once the paint goes on. If you do anything yourself, hang it and hire the finish at about $0.50–$1.50 per sq ft.

What's included in a Myrtle Beach drywall quote (and what costs extra)

A standard installed price covers the board, screws, tape, corner bead and joint compound, hanging, taping, three coats of mud, sanding to the finish level named, and a sweep-out. The headline price often leaves out:

  • Primer and paint — a separate trade in most Myrtle Beach quotes; even a bare-minimum coat of primer is extra unless listed
  • Debris haul-away — $300–$500 to dispose of old drywall from a room, or $45–$175 per 100 sq ft to tear out and remove
  • Texture — $70–$175 per 100 sq ft to apply or match; a Level 5 skim is $1.55–$3.10 per sq ft
  • Asbestos or lead testing — $30–$75 for a mail-in texture sample, $250–$850 for a professional survey, in homes built before 1980

Ask how long the company warranties cracks and nail pops; good finishers put a year in writing.

What Affects Drywall Costs in Myrtle Beach

Finish level

Level 4, the standard for painted walls, is $1.35–$2.85 per sq ft in Myrtle Beach; Level 5, a full skim coat for glossy paint or strong light, is $1.55–$3.10. Level 3 is only for heavy texture. Get the level written on the quote.

Ceilings, height and access

Ceiling board is heavier to hang and slower to finish; a 12×12 ceiling replaced runs $435–$1,300. Rooms over 8–10 ft add about 10–30%, and stairwells need scaffolding.

Repair size and count

A small hole is $65–$215, a large one $130–$385, cracks and nail pops $85–$345. Several small repairs on one visit cost far less than three separate calls at the $105–$170 minimum.

Water damage and mold

Cutting out wet board and replacing it is $260–$1,700. If mold has set in behind the wall, remediation is a separate trade at $1,500–$3,000 per 100 sq ft, and the leak has to be fixed first.

Local rules

A like-for-like drywall repair or replacement in Myrtle Beach usually needs no permit; a permit ($50–$150 where needed) comes in when walls move, the work is the garage-to-house separation or a remodel is already permitted. In homes built before 1978, a contractor who disturbs painted surfaces must follow the federal lead-safe rule, and texture or joint compound from before about 1980 should be tested for asbestos before sanding.

Labor rates in Myrtle Beach

Labor is about 70% of the bill. Myrtle Beach is a smaller market; a room of drywall here is about 16% below the US typical of $1,250. Drywall contractors here charge about $40–$85 an hour, with a $105–$170 minimum for small repairs.

Texture and old finishes

Matching texture adds $70–$175 per 100 sq ft; scraping popcorn $130–$385. Plaster walls in older Myrtle Beach homes cost more to patch ($130–$1,050) than drywall, and a full skim coat over them is $0.85–$2.60 per sq ft.

How to Save Money on Drywall in Myrtle Beach
  1. Bundle the small repairs.Most Myrtle Beach companies charge a $105–$170 minimum. One visit for five holes costs about the same as one visit for one hole.
  2. Specify Level 4, not Level 5.Level 4 ($1.35–$2.85 per sq ft) is right for flat and eggshell paint. Pay for Level 5 ($1.55–$3.10) only where glossy paint or raking light will show joints.
  3. Skim instead of replacing.Sound walls with ugly texture or lots of nail pops can be skim-coated for $0.85–$2.60 per sq ft, about half the price of new board, and with no demolition dust.
  4. Hang it yourself, hire the finish.Materials for a 12×12 room are $200–$400 and a lift rents for about $40 a day. Then pay a finisher about $0.50–$1.50 per sq ft for the part that shows.
  5. Fix the leak before the drywall.A $260–$1,700 water-damage repair under a live leak will be back in a month. Plumber or roofer first, drywall second, and keep the repair receipts for insurance.
  6. Get the finish level and extras in writing.Primer, texture matching, debris haul-away and moving furniture are the usual add-ons. A quote that lists them is cheaper to compare and harder to pad later.
Drywall Cost in Myrtle Beach: What the Quote Should Include

Myrtle Beach drywall companies often quote by the sheet or the square foot over the phone. Before you agree to the work, get these in writing:

  • The finish level by number (Level 4 for paint; Level 5 for smooth or glossy walls)
  • Board type and thickness for each room: 1/2-inch, 5/8-inch fire-rated, moisture-resistant, soundproof
  • Square footage or sheet count the price is based on
  • Whether primer is included, and who paints
  • Texture: match existing, apply new, or leave smooth
  • Demolition, debris haul-away and floor protection
  • Minimum charge and the number of visits (hanging, coats, sanding)
  • Warranty on cracks, nail pops and seams
Frequently asked questions — Drywall cost in Myrtle Beach
How much does drywall cost in Myrtle Beach?

$690–$1,650 to hang and finish one 12×12 room, labor and materials, and $1,050 is typical. That's $1.35–$2.85 per sq ft, or $45–$90 a sheet.

How much does drywall repair cost in Myrtle Beach?

$65–$215 for a small hole, $130–$385 for a large one, $85–$345 for cracks and nail pops, and $260–$1,700 for water damage. Most companies charge a $105–$170 minimum per visit.

What does drywall cost per square foot in Myrtle Beach?

$1.35–$2.85 per sq ft hung and finished to Level 4, labor and materials. Level 5 smooth is $1.55–$3.10; skim-coating existing walls $0.85–$2.60.

How much does it cost to fix a ceiling in Myrtle Beach?

$215–$1,050 for a sag, stain or hole, and $435–$1,300 to tear out and replace a whole 12×12 room ceiling. Water damage with the repair runs $475–$2,750.

Can I hang drywall myself?

Hanging, yes: materials for a room are $200–$400 and a lift rents for about $40 a day. Finishing is the skilled part; most DIYers hire it out at about $0.50–$1.50 per sq ft.

How much does it cost to remove a popcorn ceiling in Myrtle Beach?

$130–$385 per 100 sq ft to scrape, skim and prime an asbestos-free ceiling. Test first in any home built before 1980 ($30–$75 by mail); asbestos abatement costs far more.

How much is a skim coat in Myrtle Beach?

$0.85–$2.60 per sq ft, or $345–$690 for the walls of a 12×12 room. It smooths texture and small damage without new board, but the room must be repainted after.

Do I need a permit for drywall?

A like-for-like drywall repair or replacement in Myrtle Beach usually needs no permit; a permit ($50–$150 where needed) comes in when walls move, the work is the garage-to-house separation or a remodel is already permitted. In homes built before 1978, a contractor who disturbs painted surfaces must follow the federal lead-safe rule, and texture or joint compound from before about 1980 should be tested for asbestos before sanding.

How much does it cost to drywall a garage or a whole house in Myrtle Beach?

$1,050–$3,350 for a two-car garage, walls and ceiling, with fire-rated board where the code requires it. A whole 2,000 sq ft house is $8,000–$24,850 hung and finished.

What's included in a Myrtle Beach drywall quote?

Board, tape, mud, hanging, finishing to the level named, and cleanup. Often extra: primer and paint, debris haul-away ($300–$500), texture ($70–$175 per 100 sq ft) and asbestos testing in older homes.

Prices verified November 2026 · Cross-referenced against 83+ American pricing sources · See methodology

Prices for the Myrtle Beach metro area, November 2026. Outer suburbs may vary.

Our methodology
These are independent estimates built from public cost guides, dated city price pages, contractor and retailer price lists, federal producer-price and wage data. No drywall company can pay to change them, so always get a couple of quotes. Last reviewed November 2026. Read our full methodology →

Get a fair drywall quote in Myrtle Beach

Local drywall contractors · Free quotes · No obligation, no spam.

Get quotes in Myrtle Beach →Max 2 drywall contractors will contact you
Get quotes in Myrtle BeachMax 2 drywall contractors · free · no spam→