Skip to content
Independent United States Cost GuidesPrices verified November 2026 · 39 trades · 195 US cities · 221+ sources For pros →
Get a fair quote

Cost guides

Plumbing & water4 trades
Electrical & energy5 trades
Renovation8 trades
Structural7 trades
Outdoor & yard7 trades
Cleaning & maintenance8 trades

More

Get a fair quote
Cost guide

How much does drywall cost in Stamford?

By Our research team · Last verified · Methodology

Updated November 2026Independently researched12 min read
Drywall cost

Drywall costs in Stamford

Stamford, CTChange location
Get free quotesFree · no obligation · max 2 pros
Normal range for Stamford, CT
$810–$1,900per room

Drywalling a 12×12 room in Stamford costs $810–$1,900 hung and finished, labor and materials, with $1,250 the typical bill. Hang-and-finish runs $1.50–$3.25 per sq ft; a large hole patch $150–$455.

How we get this data
Typical
$1,250
Low end
$555
High end
$3,050
Per 12×12 room
$810–$1,900
Per sq ft (hang + finish)
$1.50–$3.25
Small hole patch
$75–$255
Water-damage repair
$305–$2,050

Want an exact price for your job?

Tell us the job. Casey checks it by text, then up to 2 local drywall contractors send you a real quote. Free, no obligation.

Get my fair quote →
Typical drywall price: Stamford vs nearby citiesTypical price, per room. The line marks the US typical.
New York, NY $1,450
Brooklyn, NY $1,400
Newark, NJ $1,400
Stamford, CTThis guide $1,250
New Haven, CT $1,250

The typical Stamford price is $1,250, in line with the US typical of $1,250.

Where Stamford sits among 195 US metrosNumber of metros at each typical drywall price, per room.

Stamford's price band

Stamford is pricier than 58% of the 195 US metros we price for drywall work.

Drywalling one 12×12 room in Stamford costs $810–$1,900, and $1,250 is what most homeowners pay. Repairs are the most common call: $75–$255 for a small hole, $255–$1,200 for a ceiling stain or sag. A whole 2,000 sq ft house runs $9,100–$28,300.

Stamford is a mid-size market. Drywalling a room here is in line with the US typical of $1,250, and nearly all of the gap is labor: a sheet of drywall costs about the same at every supplier in the country.

Prices on this page include labor and materials to a paint-ready finish unless the row says otherwise; paint and primer are extra. Many Stamford companies charge a $125–$205 minimum for a single small patch.

Comparing cities, or after the US-wide picture? See the national guide: Drywall cost in the USA.

Quick answer

$810–$1,900 to hang and finish drywall in one 12×12 room in Stamford, labor and materials — typically $1,250. That's $1.50–$3.25 per sq ft or $50–$100 a sheet; a small hole patch is $75–$255 and water-damage repair $305–$2,050. Verified November 2026. Get free Stamford quotes →

  • One 12×12 room hung and finished: $810–$1,900 ($1,250 typical)
  • Per sq ft $1.50–$3.25; per sheet $50–$100
  • Small hole $75–$255; large hole $150–$455; water damage $305–$2,050
  • Skim coat $1.00–$3.05 per sq ft; popcorn removal $150–$455 per 100 sq ft
  • Priciest area to work in: Downtown Stamford & Harbor Point; lowest quotes: Greenwich & Port Chester NY

Prices verified November 2026 · Cross-referenced against 83+ American pricing sources · See methodology

Detailed pricing — Drywall cost in Stamford 2026

Installed prices include labor and materials to a paint-ready finish; repairs are per job including the visit. Stamford metro, re-verified November 2026.

ServiceLowTypicalHigh
Hang and finish drywall, one 12×12 room (walls and ceiling, about 500 sq ft)per room$810per room$1,250$1,900
Drywall contractor hourly rate/hr$45/hr$70$100
Hang and finish, standard Level 4 finish, per 100 sq ft (labor and materials)per 100 sq ft$150per 100 sq ft$225$325
Level 5 smooth finish on new drywall, per 100 sq ftper 100 sq ft$175per 100 sq ft$280$355
One 4×8 sheet of 1/2-inch drywall, hung and finishedper sheet$50per sheet$70$100
Small hole or dent repair (under 4 in.), one visitper job$75per job$150$255
Large hole repair (6–12 in., new piece let in and finished)per job$150per job$280$455
Cracks, nail pops and seam repairper job$100per job$205$405
Water-damaged drywall: cut out, replace and finishper job$305per job$910$2,050
Ceiling drywall repair (sag, stain or hole)per job$255per job$610$1,200
Replace a 12×12 room ceiling: tear out, new drywall, finishedper room$505per room$910$1,500
Skim coat existing walls to a smooth finish, per 100 sq ftper 100 sq ft$100per 100 sq ft$130$305
Skim coat one 12×12 room, walls onlyper room$405per room$555$810
Wall texture (orange peel, knockdown, skip trowel), per 100 sq ftper 100 sq ft$80per 100 sq ft$130$200
Popcorn ceiling removal and re-skim (no asbestos), per 100 sq ftper 100 sq ft$150per 100 sq ft$255$455
Corner bead repair or replacement (one damaged outside corner)per corner$75per corner$150$305
New partition wall, framed and drywalled both sides (8 ft high), per linear ftper linear ft$25per linear ft$45$80
Soundproof drywall (QuietRock or double 5/8-inch layer), per 100 sq ft installedper 100 sq ft$355per 100 sq ft$530$755
Moisture- and mold-resistant drywall (green or purple board), per 100 sq ft installedper 100 sq ft$175per 100 sq ft$255$355
Drywall a 2-car garage, walls and ceiling (5/8-inch fire-rated where code requires)per garage$1,200per garage$2,200$3,850
Drywall a whole 2,000 sq ft house (about 7,000 sq ft of board), hung and finishedper house$9,100per house$15,150$28,300
Remove and dispose of old drywall, per 100 sq ftper 100 sq ft$50per 100 sq ft$100$200
Plaster wall or ceiling repair (cracks, holes, loose plaster)per job$150per job$405$1,200
Drywall crew day rate (two people, materials extra)per day$710per day$1,100$1,600
drywall jobs in Stamford: what they costPer 100 sq ft, low to high with the typical price marked. Every line is in the table above.
Soundproof drywall (QuietRock or double 5/8-inch layer), per 100 sq ft installed $530$355–$755
Level 5 smooth finish on new drywall, per 100 sq ft $280$175–$355
Popcorn ceiling removal and re-skim (no asbestos), per 100 sq ft $255$150–$455
Moisture- and mold-resistant drywall (green or purple board), per 100 sq ft installed $255$175–$355
Hang and finish, standard Level 4 finish, per 100 sq ft (labor and materials) $225$150–$325
Skim coat existing walls to a smooth finish, per 100 sq ft $130$100–$305
Wall texture (orange peel, knockdown, skip trowel), per 100 sq ft $130$80–$200
Remove and dispose of old drywall, per 100 sq ft $100$50–$200
Already got a quote?
Check it against these Stamford prices — free, no sign-up.
$

Got it as a PDF or photo? Upload up to 3 quotes and compare →

Free quotes

Get free quotes from up to 2 local drywall contractors in Stamford

Free · No obligation · About a minute

  1. 1The job
  2. 2Budget
  3. 3Your details
Casey · LocalGoingRate

What do you need a price on?

Tap one to start.

Prices verified November 2026 · Cross-referenced against 83+ American pricing sources · See methodology

Figures are for the Stamford metro area. Trip fees can apply on the far edges; apartments and pre-war buildings in Downtown Stamford & Harbor Point cost the most to work in.

How drywall costs vary across Stamford

Drywall prices across Stamford

Where you live in the metro changes the labor, not the board. Older homes in Downtown Stamford & Harbor Point take the longest; jobs in Greenwich & Port Chester NY tend to come in at or under the city typical.

Drywall prices across StamfordTypical range by part of the metro, per room. The line marks the Stamford typical.
Downtown Stamford & Harbor Point8–12% above the city average $875–$2,150per room
West Side & WatersideStandard to 6% above $835–$2,000per room
Norwalk & DarienStandard pricing $810–$1,900per room
Greenwich & Port Chester NYStandard; bigger rooms common $810–$1,950per room

Downtown Stamford & Harbor Point

8–12% above the city average
Downtown, Harbor Point, Shippan
Per 12×12 room
$875–$2,150 per room
Typical repair
$160–$510 / large hole patch

Apartments, condos and older houses. Expect a higher minimum charge, and ask whether the price covers protecting floors and hauling debris down.

West Side & Waterside

Standard to 6% above
West Side, Waterside, South End
Per 12×12 room
$835–$2,000 per room
Typical repair
$155–$480 / large hole patch

Older housing with character and the quirks that go with it: crooked studs, plaster patches and old texture that has to be matched.

Norwalk & Darien

Standard pricing
Norwalk, Darien, New Canaan
Per 12×12 room
$810–$1,900 per room
Typical repair
$150–$455 / large hole patch

Standard pricing for standard jobs. Driveway parking and easy access keep visits short.

Greenwich & Port Chester NY

Standard; bigger rooms common
Greenwich, Port Chester NY, White Plains NY
Per 12×12 room
$810–$1,950 per room
Typical repair
$150–$470 / large hole patch

Newer homes with easy access and drywall throughout. Visits are quick; the bigger bills are garages, additions and whole-house repaints after a skim coat.

What you'll actually pay — job by job

Real-World Drywall Costs in Stamford

Here's what common drywall jobs cost in Stamford in 2026, labor and materials to a paint-ready finish.

Doorknob hole in a bedroom wall — 1 visit, 1–2 hours

$75–$255

Cut a clean square, screw in a backer, let in a patch, tape and mud in two or three coats, sand. Most Stamford companies charge their $125–$205 minimum for a single patch, so add other holes to the same visit.

Ceiling stain and sag after a bathroom leak

$560–$3,250

Water-damaged board cut out and replaced ($305–$2,050) plus the ceiling repair and texture match ($255–$1,200). Fix the leak first; the drywall company won't warranty a patch under a live drip.

Drywall one 12×12 room (garage conversion, addition or basement) — 2–4 days

$810–$1,900

Walls and ceiling hung and finished to Level 4 for $1,250 typical, about 15 sheets. Moisture-resistant board for a bathroom or basement adds about $30 per 100 sq ft; paint is separate.

Scrape a popcorn ceiling in a living room (about 300 sq ft)

$450–$1,365

Scrape, skim smooth and prime at $150–$455 per 100 sq ft. In a home built before 1980, a lab test ($30–$75) comes first; if it's positive, abatement is a different trade at a much higher price.

Skim coat a textured bedroom smooth

$405–$810

Two thin coats of compound over the walls of a 12×12 room, sanded to Level 5, at $1.00–$3.05 per sq ft. The ceiling adds $100–$150 per 100 sq ft, and new paint is a must afterwards.

How much does drywall cost in Stamford?

Between $810 and $1,900 for one 12×12 room, walls and ceiling, hung and finished ready for paint, and $1,250 is the price most Stamford homeowners pay. The board is cheap: about $10–$20 a sheet, or $200–$400 in materials for the whole room. The rest is two or three visits by a hanger and a finisher, and the finishing is what you're paying for.

Repairs are priced by the job, not the foot: $75–$255 for a small hole, $150–$455 for a large one, $305–$2,050 for water damage. Most Stamford companies have a $125–$205 minimum, so bundle small fixes into one visit. Prices re-checked against 83 sources in November 2026.

Drywall prices in Stamford (2026): new board, repairs and finishes

Hang and finish costs $1.50–$3.25 per sq ft in Stamford, a small hole patch $75–$255, and a skim coat $1.00–$3.05 per sq ft.

Line on the quoteLowTypicalHigh
Hang and finish, standard Level 4 finish, per 100 sq ft (labor and materials)$150$225$325
One 4×8 sheet of 1/2-inch drywall, hung and finished$50$70$100
Small hole or dent repair (under 4 in.), one visit$75$150$255
Large hole repair (6–12 in., new piece let in and finished)$150$280$455
Water-damaged drywall: cut out, replace and finish$305$910$2,050
Replace a 12×12 room ceiling: tear out, new drywall, finished$505$910$1,500
Skim coat existing walls to a smooth finish, per 100 sq ft$100$130$305
Popcorn ceiling removal and re-skim (no asbestos), per 100 sq ft$150$255$455

The board is the cheap bit. A sheet is $10–$20 on its own; the Stamford price of $50–$100 hung and finished is mostly a finisher's time over two or three visits while coats dry.

What moves a drywall quote in Stamford:

  • Finish level — Level 4 for painted walls is $1.50–$3.25 per sq ft; a Level 5 smooth finish $1.75–$3.55.
  • Ceilings and height — ceiling board is slower to hang; rooms over 8–10 ft add about 10–30%.
  • Board type — moisture-resistant board is $175–$355 per 100 sq ft installed; soundproof $355–$755.
  • Texture — matching orange peel or knockdown adds $80–$200 per 100 sq ft; scraping popcorn $150–$455.
  • Minimum charge — a single small patch costs $75–$255 because most companies charge a $125–$205 minimum visit.

Ask every Stamford company for the same five things: the finish level by number, whether primer is included, who hauls the debris, how texture will be matched, and the minimum charge. Compare those, not the headline price. Get a quote for your drywall job →

Drywall Cost in Stamford by Room and Project Size

Quick answer

One 12×12 room: $810–$1,900. Two-car garage, walls and ceiling: $1,200–$3,850. Whole 2,000 sq ft house: $9,100–$28,300. Per sheet: $50–$100 hung and finished.

Worked example: a Stamford living room of about 300 sq ft of wall with a popcorn ceiling. Scraping and re-skimming the ceiling at $255 per 100 sq ft is about $765, and skim-coating the walls smooth at $130 per 100 sq ft about $390, so roughly $1,155 before paint. A lab test for asbestos ($30–$75) comes first in a home built before 1980.

Whole-house math: a 2,000 sq ft house has about 7,000 sq ft of wall and ceiling. At $1.50–$3.25 per sq ft that is $9,100–$28,300 hung and finished, which is why a gut remodel's drywall line is one of its biggest. Booking the drywall and paint crews back to back saves a second round of floor protection and cleanup.

Stamford Drywall Costs by Board and Finish Type

Board or finish typeCostBest for
Standard 1/2-inch drywall$150–$325 per 100 sq ftWalls in living rooms, bedrooms and hallways. The sheet itself is $10–$20; most of the price is hanging and finishing.
5/8-inch Type X fire-rated$13–$30 per sheet (board only)Required on a garage ceiling under living space; common on the garage wall shared with the house (the code minimum there is 1/2-inch) and in furnace rooms. Heavier and stiffer, so it also resists sag on ceilings.
Moisture- and mold-resistant (green or purple board)$175–$355 per 100 sq ft installedBathrooms, laundry rooms, basements and garages. Not a tile backer inside a shower; that needs cement board.
Soundproof (QuietRock or double layer)$355–$755 per 100 sq ft installedBedroom walls next to a living room, home offices, shared walls in a duplex. The sheet alone is $30–$100.
Lightweight 1/2-inch (UltraLight)$150–$325 per 100 sq ftCeilings and DIY jobs: lighter than regular 1/2-inch board at the same price, so it is easier to lift overhead.
Level 5 smooth finish$175–$355 per 100 sq ftWalls that get glossy paint, dark colors or raking light from big windows. A thin skim coat over the whole sheet hides every joint.
Skim coat over existing walls$100–$305 per 100 sq ftSmoothing textured or damaged walls without tearing them out. Cheaper than new drywall when the old board is sound.
Plaster (repair or veneer)$150–$1,200 per repairPre-1950 homes with plaster-and-lath walls. Patching plaster costs more per square foot than drywall; replacing it with drywall is a bigger job.
Cost by board or finish type in StamfordTypical range, per 100 sq ft.
Standard 1/2-inch drywall $150–$325per 100 sq ft
Lightweight 1/2-inch (UltraLight) $150–$325per 100 sq ft
Level 5 smooth finish $175–$355per 100 sq ft
Skim coat over existing walls $100–$305per 100 sq ft
Stamford tip: for a basement or bathroom, ask for moisture- and mold-resistant board ($175–$355 per 100 sq ft installed). It costs little more than standard board and saves a $305–$2,050 repair after the first leak.

Board price vs. what you pay — the Stamford drywall bill

A 4×8 sheet of 1/2-inch drywall costs $10–$20 at the store, and all the materials for a 12×12 room run $200–$400, but the room hung and finished in Stamford is $810–$1,900. The difference pays for a hanger, a finisher who comes back two or three times as coats dry, sanding, cleanup and a warranty on cracks.

Hanging board is the easy half and the one DIYers can do; a $40-a-day lift rental makes ceilings possible. Taping and finishing is the skilled half: a poor Level 4 job shows every joint once the paint goes on. If you do anything yourself, hang it and hire the finish at about $0.50–$1.50 per sq ft.

What's included in a Stamford drywall quote (and what costs extra)

A standard installed price covers the board, screws, tape, corner bead and joint compound, hanging, taping, three coats of mud, sanding to the finish level named, and a sweep-out. The headline price often leaves out:

  • Primer and paint — a separate trade in most Stamford quotes; even a bare-minimum coat of primer is extra unless listed
  • Debris haul-away — $300–$500 to dispose of old drywall from a room, or $50–$200 per 100 sq ft to tear out and remove
  • Texture — $80–$200 per 100 sq ft to apply or match; a Level 5 skim is $1.75–$3.55 per sq ft
  • Asbestos or lead testing — $30–$75 for a mail-in texture sample, $250–$850 for a professional survey, in homes built before 1980

Ask how long the company warranties cracks and nail pops; good finishers put a year in writing.

What Affects Drywall Costs in Stamford

Finish level

Level 4, the standard for painted walls, is $1.50–$3.25 per sq ft in Stamford; Level 5, a full skim coat for glossy paint or strong light, is $1.75–$3.55. Level 3 is only for heavy texture. Get the level written on the quote.

Ceilings, height and access

Ceiling board is heavier to hang and slower to finish; a 12×12 ceiling replaced runs $505–$1,500. Rooms over 8–10 ft add about 10–30%, and stairwells need scaffolding.

Repair size and count

A small hole is $75–$255, a large one $150–$455, cracks and nail pops $100–$405. Several small repairs on one visit cost far less than three separate calls at the $125–$205 minimum.

Water damage and mold

Cutting out wet board and replacing it is $305–$2,050. If mold has set in behind the wall, remediation is a separate trade at $1,500–$3,000 per 100 sq ft, and the leak has to be fixed first.

Local rules

A like-for-like drywall repair or replacement in Stamford usually needs no permit; a permit ($50–$150 where needed) comes in when walls move, the work is the garage-to-house separation or a remodel is already permitted. In homes built before 1978, a contractor who disturbs painted surfaces must follow the federal lead-safe rule, and texture or joint compound from before about 1980 should be tested for asbestos before sanding.

Labor rates in Stamford

Labor is about 70% of the bill. Stamford is a mid-size market; a room of drywall here is in line with the US typical of $1,250. Drywall contractors here charge about $45–$100 an hour, with a $125–$205 minimum for small repairs.

Texture and old finishes

Matching texture adds $80–$200 per 100 sq ft; scraping popcorn $150–$455. Plaster walls in older Stamford homes cost more to patch ($150–$1,200) than drywall, and a full skim coat over them is $1.00–$3.05 per sq ft.

How to Save Money on Drywall in Stamford
  1. Bundle the small repairs.Most Stamford companies charge a $125–$205 minimum. One visit for five holes costs about the same as one visit for one hole.
  2. Specify Level 4, not Level 5.Level 4 ($1.50–$3.25 per sq ft) is right for flat and eggshell paint. Pay for Level 5 ($1.75–$3.55) only where glossy paint or raking light will show joints.
  3. Skim instead of replacing.Sound walls with ugly texture or lots of nail pops can be skim-coated for $1.00–$3.05 per sq ft, about half the price of new board, and with no demolition dust.
  4. Hang it yourself, hire the finish.Materials for a 12×12 room are $200–$400 and a lift rents for about $40 a day. Then pay a finisher about $0.50–$1.50 per sq ft for the part that shows.
  5. Fix the leak before the drywall.A $305–$2,050 water-damage repair under a live leak will be back in a month. Plumber or roofer first, drywall second, and keep the repair receipts for insurance.
  6. Get the finish level and extras in writing.Primer, texture matching, debris haul-away and moving furniture are the usual add-ons. A quote that lists them is cheaper to compare and harder to pad later.
Drywall Cost in Stamford: What the Quote Should Include

Stamford drywall companies often quote by the sheet or the square foot over the phone. Before you agree to the work, get these in writing:

  • The finish level by number (Level 4 for paint; Level 5 for smooth or glossy walls)
  • Board type and thickness for each room: 1/2-inch, 5/8-inch fire-rated, moisture-resistant, soundproof
  • Square footage or sheet count the price is based on
  • Whether primer is included, and who paints
  • Texture: match existing, apply new, or leave smooth
  • Demolition, debris haul-away and floor protection
  • Minimum charge and the number of visits (hanging, coats, sanding)
  • Warranty on cracks, nail pops and seams
Frequently asked questions — Drywall cost in Stamford
How much does drywall cost in Stamford?

$810–$1,900 to hang and finish one 12×12 room, labor and materials, and $1,250 is typical. That's $1.50–$3.25 per sq ft, or $50–$100 a sheet.

How much does drywall repair cost in Stamford?

$75–$255 for a small hole, $150–$455 for a large one, $100–$405 for cracks and nail pops, and $305–$2,050 for water damage. Most companies charge a $125–$205 minimum per visit.

What does drywall cost per square foot in Stamford?

$1.50–$3.25 per sq ft hung and finished to Level 4, labor and materials. Level 5 smooth is $1.75–$3.55; skim-coating existing walls $1.00–$3.05.

How much does it cost to fix a ceiling in Stamford?

$255–$1,200 for a sag, stain or hole, and $505–$1,500 to tear out and replace a whole 12×12 room ceiling. Water damage with the repair runs $560–$3,250.

Can I hang drywall myself?

Hanging, yes: materials for a room are $200–$400 and a lift rents for about $40 a day. Finishing is the skilled part; most DIYers hire it out at about $0.50–$1.50 per sq ft.

How much does it cost to remove a popcorn ceiling in Stamford?

$150–$455 per 100 sq ft to scrape, skim and prime an asbestos-free ceiling. Test first in any home built before 1980 ($30–$75 by mail); asbestos abatement costs far more.

How much is a skim coat in Stamford?

$1.00–$3.05 per sq ft, or $405–$810 for the walls of a 12×12 room. It smooths texture and small damage without new board, but the room must be repainted after.

Do I need a permit for drywall?

A like-for-like drywall repair or replacement in Stamford usually needs no permit; a permit ($50–$150 where needed) comes in when walls move, the work is the garage-to-house separation or a remodel is already permitted. In homes built before 1978, a contractor who disturbs painted surfaces must follow the federal lead-safe rule, and texture or joint compound from before about 1980 should be tested for asbestos before sanding.

How much does it cost to drywall a garage or a whole house in Stamford?

$1,200–$3,850 for a two-car garage, walls and ceiling, with fire-rated board where the code requires it. A whole 2,000 sq ft house is $9,100–$28,300 hung and finished.

What's included in a Stamford drywall quote?

Board, tape, mud, hanging, finishing to the level named, and cleanup. Often extra: primer and paint, debris haul-away ($300–$500), texture ($80–$200 per 100 sq ft) and asbestos testing in older homes.

Prices verified November 2026 · Cross-referenced against 83+ American pricing sources · See methodology

Prices for the Stamford metro area, November 2026. Outer suburbs may vary.

Our methodology
These are independent estimates built from public cost guides, dated city price pages, contractor and retailer price lists, federal producer-price and wage data. No drywall company can pay to change them, so always get a couple of quotes. Last reviewed November 2026. Read our full methodology →

Get a fair drywall quote in Stamford

Local drywall contractors · Free quotes · No obligation, no spam.

Get quotes in Stamford →Max 2 drywall contractors will contact you
Get quotes in StamfordMax 2 drywall contractors · free · no spam→