Skip to content
Independent United States Cost GuidesPrices verified November 2026 · 39 trades · 195 US cities · 221+ sources For pros →
Get a fair quote

Cost guides

Plumbing & water4 trades
Electrical & energy5 trades
Renovation8 trades
Structural7 trades
Outdoor & yard7 trades
Cleaning & maintenance8 trades

More

Get a fair quote
Cost guide

How much does drywall cost in Tallahassee?

By Our research team · Last verified · Methodology

Updated November 2026Independently researched13 min read
Drywall cost

Drywall costs in Tallahassee

Tallahassee, FLChange location
Get free quotesFree · no obligation · max 2 pros
Normal range for Tallahassee, FL
$715–$1,700per room

Drywalling a 12×12 room in Tallahassee costs $715–$1,700 per room, walls and ceiling. Most homeowners here pay about $1,100. A small patch is $65–$225; water-damage repair $270–$1,800.

How we get this data
Typical
$1,100
Low end
$490
High end
$2,700
Per 12×12 room
$715–$1,700
Per sq ft (hang + finish)
$1.35–$2.95
Small hole patch
$65–$225
Water-damage repair
$270–$1,800

Want an exact price for your job?

Tell us the job. Casey checks it by text, then up to 2 local drywall contractors send you a real quote. Free, no obligation.

Get my fair quote →
Typical drywall price: Tallahassee vs nearby citiesTypical price, per room. The line marks the US typical.
Columbus, GA $1,200
Macon, GA $1,200
Tallahassee, FLThis guide $1,100
Pensacola, FL $1,100

The typical Tallahassee price is $1,100, 12% below the US typical of $1,250.

Where Tallahassee sits among 195 US metrosNumber of metros at each typical drywall price, per room.

Tallahassee's price band

Tallahassee is cheaper than 68% of the 195 US metros we price for drywall work.

Expect $1.35–$2.95 per sq ft to hang and finish new drywall in Tallahassee, $135–$400 to patch a large hole, $135–$400 per 100 sq ft to scrape a popcorn ceiling, and $1,100–$3,500 to drywall a two-car garage. Drywall contractors here charge about $40–$90 an hour.

Florida's contractor licensing law defines no drywall category, so drywall contractors are not state-licensed here; check the company's insurance and any county or city registration, and ask for moisture- or mold-resistant board in bathrooms, garages and any room that has flooded.

Every installed price here covers board, hanging, taping, mud and sanding to a Level 4 finish. Painting is a separate trade, and repairs under about $180 usually hit a company's minimum charge.

Comparing cities, or after the US-wide picture? See the national guide: Drywall cost in the USA.

Quick answer

$715–$1,700 to hang and finish drywall in one 12×12 room in Tallahassee, labor and materials — typically $1,100. That's $1.35–$2.95 per sq ft or $45–$90 a sheet; a small hole patch is $65–$225 and water-damage repair $270–$1,800. Verified November 2026. Get free Tallahassee quotes →

  • One 12×12 room hung and finished: $715–$1,700 ($1,100 typical)
  • Per sq ft $1.35–$2.95; per sheet $45–$90
  • Small hole $65–$225; large hole $135–$400; water damage $270–$1,800
  • Skim coat $0.90–$2.70 per sq ft; popcorn removal $135–$400 per 100 sq ft
  • Priciest area to work in: Downtown, Midtown & Railroad Square; lowest quotes: FSU & FAMU

Prices verified November 2026 · Cross-referenced against 83+ American pricing sources · See methodology

Detailed pricing — Drywall cost in Tallahassee 2026

Installed prices include labor and materials to a paint-ready finish; repairs are per job including the visit. Tallahassee metro, re-verified November 2026.

ServiceLowTypicalHigh
Hang and finish drywall, one 12×12 room (walls and ceiling, about 500 sq ft)per room$715per room$1,100$1,700
Drywall contractor hourly rate/hr$40/hr$65$90
Hang and finish, standard Level 4 finish, per 100 sq ft (labor and materials)per 100 sq ft$135per 100 sq ft$205$295
Level 5 smooth finish on new drywall, per 100 sq ftper 100 sq ft$160per 100 sq ft$250$320
One 4×8 sheet of 1/2-inch drywall, hung and finishedper sheet$45per sheet$65$90
Small hole or dent repair (under 4 in.), one visitper job$65per job$135$225
Large hole repair (6–12 in., new piece let in and finished)per job$135per job$245$400
Cracks, nail pops and seam repairper job$90per job$180$355
Water-damaged drywall: cut out, replace and finishper job$270per job$805$1,800
Ceiling drywall repair (sag, stain or hole)per job$225per job$535$1,050
Replace a 12×12 room ceiling: tear out, new drywall, finishedper room$450per room$815$1,350
Skim coat existing walls to a smooth finish, per 100 sq ftper 100 sq ft$90per 100 sq ft$115$270
Skim coat one 12×12 room, walls onlyper room$355per room$490$715
Wall texture (orange peel, knockdown, skip trowel), per 100 sq ftper 100 sq ft$70per 100 sq ft$120$180
Popcorn ceiling removal and re-skim (no asbestos), per 100 sq ftper 100 sq ft$135per 100 sq ft$225$400
Corner bead repair or replacement (one damaged outside corner)per corner$65per corner$135$270
New partition wall, framed and drywalled both sides (8 ft high), per linear ftper linear ft$25per linear ft$40$75
Soundproof drywall (QuietRock or double 5/8-inch layer), per 100 sq ft installedper 100 sq ft$330per 100 sq ft$490$700
Moisture- and mold-resistant drywall (green or purple board), per 100 sq ft installedper 100 sq ft$160per 100 sq ft$230$320
Drywall a 2-car garage, walls and ceiling (5/8-inch fire-rated where code requires)per garage$1,100per garage$2,000$3,500
Drywall a whole 2,000 sq ft house (about 7,000 sq ft of board), hung and finishedper house$8,250per house$13,700$25,600
Remove and dispose of old drywall, per 100 sq ftper 100 sq ft$45per 100 sq ft$90$180
Plaster wall or ceiling repair (cracks, holes, loose plaster)per job$135per job$355$1,050
Drywall crew day rate (two people, materials extra)per day$625per day$985$1,450
drywall jobs in Tallahassee: what they costPer 100 sq ft, low to high with the typical price marked. Every line is in the table above.
Soundproof drywall (QuietRock or double 5/8-inch layer), per 100 sq ft installed $490$330–$700
Level 5 smooth finish on new drywall, per 100 sq ft $250$160–$320
Moisture- and mold-resistant drywall (green or purple board), per 100 sq ft installed $230$160–$320
Popcorn ceiling removal and re-skim (no asbestos), per 100 sq ft $225$135–$400
Hang and finish, standard Level 4 finish, per 100 sq ft (labor and materials) $205$135–$295
Wall texture (orange peel, knockdown, skip trowel), per 100 sq ft $120$70–$180
Skim coat existing walls to a smooth finish, per 100 sq ft $115$90–$270
Remove and dispose of old drywall, per 100 sq ft $90$45–$180
Already got a quote?
Check it against these Tallahassee prices — free, no sign-up.
$

Got it as a PDF or photo? Upload up to 3 quotes and compare →

Free quotes

Get free quotes from up to 2 local drywall contractors in Tallahassee

Free · No obligation · About a minute

  1. 1The job
  2. 2Budget
  3. 3Your details
Casey · LocalGoingRate

What do you need a price on?

Tap one to start.

Prices verified November 2026 · Cross-referenced against 83+ American pricing sources · See methodology

Prices cover the Tallahassee metro. Outlying towns can run 5–10% lower; older homes in Downtown, Midtown & Railroad Square sit at the top of each range.

How drywall costs vary across Tallahassee

Drywall prices across Tallahassee

Where you live in the metro changes the labor, not the board. Older homes in Downtown, Midtown & Railroad Square take the longest; jobs in FSU & FAMU tend to come in at or under the city typical.

Drywall prices across TallahasseeTypical range by part of the metro, per room. The line marks the Tallahassee typical.
Downtown, Midtown & Railroad Square8–12% above the city average $770–$1,900per room
Frenchtown & South CityStandard to 6% above $735–$1,800per room
FSU & FAMU3–5% below $680–$1,650per room
Killearn, Southwood & the suburbsStandard; bigger rooms common $715–$1,750per room

Downtown, Midtown & Railroad Square

8–12% above the city average
Downtown, Midtown, Railroad Square
Per 12×12 room
$770–$1,900 per room
Typical repair
$145–$450 / large hole patch

The priciest part of the metro for drywall work: tight access, building rules on dust and noise, and older walls that need more prep.

Frenchtown & South City

Standard to 6% above
Frenchtown, South City, Bond
Per 12×12 room
$735–$1,800 per room
Typical repair
$140–$425 / large hole patch

A mix of older homes and new infill. Older houses here often have textured or much-patched walls, which push a repair toward the top of the range.

FSU & FAMU

3–5% below
Florida State, FAMU, College Town
Per 12×12 room
$680–$1,650 per room
Typical repair
$130–$390 / large hole patch

Rentals and older houses. Landlord patch jobs are quick and repetitive, which keeps prices a little under the city average.

Killearn, Southwood & the suburbs

Standard; bigger rooms common
Killearn, Southwood, Northeast Tallahassee
Per 12×12 room
$715–$1,750 per room
Typical repair
$135–$410 / large hole patch

Newer homes with easy access and drywall throughout. Visits are quick; the bigger bills are garages, additions and whole-house repaints after a skim coat.

What you'll actually pay — job by job

Real-World Drywall Costs in Tallahassee

Here's what common drywall jobs cost in Tallahassee in 2026, labor and materials to a paint-ready finish.

Doorknob hole in a bedroom wall — 1 visit, 1–2 hours

$65–$225

Cut a clean square, screw in a backer, let in a patch, tape and mud in two or three coats, sand. Most Tallahassee companies charge their $110–$180 minimum for a single patch, so add other holes to the same visit.

Ceiling stain and sag after a bathroom leak

$495–$2,850

Water-damaged board cut out and replaced ($270–$1,800) plus the ceiling repair and texture match ($225–$1,050). Fix the leak first; the drywall company won't warranty a patch under a live drip.

Drywall one 12×12 room (garage conversion, addition or basement) — 2–4 days

$715–$1,700

Walls and ceiling hung and finished to Level 4 for $1,100 typical, about 15 sheets. Moisture-resistant board for a bathroom or basement adds about $25 per 100 sq ft; paint is separate.

Scrape a popcorn ceiling in a living room (about 300 sq ft)

$405–$1,200

Scrape, skim smooth and prime at $135–$400 per 100 sq ft. In a home built before 1980, a lab test ($30–$75) comes first; if it's positive, abatement is a different trade at a much higher price.

Skim coat a textured bedroom smooth

$355–$715

Two thin coats of compound over the walls of a 12×12 room, sanded to Level 5, at $0.90–$2.70 per sq ft. The ceiling adds $100–$150 per 100 sq ft, and new paint is a must afterwards.

How much does drywall cost in Tallahassee?

$715–$1,700, with $1,100 typical. A room with a plain ceiling and few corners sits at the low end; a Level 5 smooth finish ($1.60–$3.20 per sq ft), a vaulted ceiling or lots of windows and closets lands near the top. Quotes above $1,700 usually mean a bigger room, demolition or texture.

Repairs are priced by the job, not the foot: $65–$225 for a small hole, $135–$400 for a large one, $270–$1,800 for water damage. Most Tallahassee companies have a $110–$180 minimum, so bundle small fixes into one visit. Prices re-checked against 83 sources in November 2026.

Drywall prices in Tallahassee (2026): new board, repairs and finishes

Hang and finish costs $1.35–$2.95 per sq ft in Tallahassee, a small hole patch $65–$225, and a skim coat $0.90–$2.70 per sq ft.

Line on the quoteLowTypicalHigh
Hang and finish, standard Level 4 finish, per 100 sq ft (labor and materials)$135$205$295
One 4×8 sheet of 1/2-inch drywall, hung and finished$45$65$90
Small hole or dent repair (under 4 in.), one visit$65$135$225
Large hole repair (6–12 in., new piece let in and finished)$135$245$400
Water-damaged drywall: cut out, replace and finish$270$805$1,800
Replace a 12×12 room ceiling: tear out, new drywall, finished$450$815$1,350
Skim coat existing walls to a smooth finish, per 100 sq ft$90$115$270
Popcorn ceiling removal and re-skim (no asbestos), per 100 sq ft$135$225$400

The board is the cheap bit. A sheet is $10–$20 on its own; the Tallahassee price of $45–$90 hung and finished is mostly a finisher's time over two or three visits while coats dry.

What moves a drywall quote in Tallahassee:

  • Finish level — Level 4 for painted walls is $1.35–$2.95 per sq ft; a Level 5 smooth finish $1.60–$3.20.
  • Ceilings and height — ceiling board is slower to hang; rooms over 8–10 ft add about 10–30%.
  • Board type — moisture-resistant board is $160–$320 per 100 sq ft installed; soundproof $330–$700.
  • Texture — matching orange peel or knockdown adds $70–$180 per 100 sq ft; scraping popcorn $135–$400.
  • Minimum charge — a single small patch costs $65–$225 because most companies charge a $110–$180 minimum visit.

Ask every Tallahassee company for the same five things: the finish level by number, whether primer is included, who hauls the debris, how texture will be matched, and the minimum charge. Compare those, not the headline price. Get a quote for your drywall job →

Drywall Cost in Tallahassee by Room and Project Size

Quick answer

One 12×12 room: $715–$1,700. Two-car garage, walls and ceiling: $1,100–$3,500. Whole 2,000 sq ft house: $8,250–$25,600. Per sheet: $45–$90 hung and finished.

Worked example: a Tallahassee living room of about 300 sq ft of wall with a popcorn ceiling. Scraping and re-skimming the ceiling at $225 per 100 sq ft is about $675, and skim-coating the walls smooth at $115 per 100 sq ft about $345, so roughly $1,020 before paint. A lab test for asbestos ($30–$75) comes first in a home built before 1980.

Whole-house math: a 2,000 sq ft house has about 7,000 sq ft of wall and ceiling. At $1.35–$2.95 per sq ft that is $8,250–$25,600 hung and finished, which is why a gut remodel's drywall line is one of its biggest. Booking the drywall and paint crews back to back saves a second round of floor protection and cleanup.

Tallahassee Drywall Costs by Board and Finish Type

Board or finish typeCostBest for
Standard 1/2-inch drywall$135–$295 per 100 sq ftWalls in living rooms, bedrooms and hallways. The sheet itself is $10–$20; most of the price is hanging and finishing.
5/8-inch Type X fire-rated$13–$30 per sheet (board only)Required on a garage ceiling under living space; common on the garage wall shared with the house (the code minimum there is 1/2-inch) and in furnace rooms. Heavier and stiffer, so it also resists sag on ceilings.
Moisture- and mold-resistant (green or purple board)$160–$320 per 100 sq ft installedBathrooms, laundry rooms, basements and garages. Not a tile backer inside a shower; that needs cement board.
Soundproof (QuietRock or double layer)$330–$700 per 100 sq ft installedBedroom walls next to a living room, home offices, shared walls in a duplex. The sheet alone is $30–$100.
Lightweight 1/2-inch (UltraLight)$135–$295 per 100 sq ftCeilings and DIY jobs: lighter than regular 1/2-inch board at the same price, so it is easier to lift overhead.
Level 5 smooth finish$160–$320 per 100 sq ftWalls that get glossy paint, dark colors or raking light from big windows. A thin skim coat over the whole sheet hides every joint.
Skim coat over existing walls$90–$270 per 100 sq ftSmoothing textured or damaged walls without tearing them out. Cheaper than new drywall when the old board is sound.
Plaster (repair or veneer)$135–$1,050 per repairPre-1950 homes with plaster-and-lath walls. Patching plaster costs more per square foot than drywall; replacing it with drywall is a bigger job.
Cost by board or finish type in TallahasseeTypical range, per 100 sq ft.
Standard 1/2-inch drywall $135–$295per 100 sq ft
Lightweight 1/2-inch (UltraLight) $135–$295per 100 sq ft
Level 5 smooth finish $160–$320per 100 sq ft
Skim coat over existing walls $90–$270per 100 sq ft
Tallahassee tip: if the wall between your garage and house is bare studs or thin paneling, drywalling it is a code item, not a cosmetic one: 1/2-inch board on the wall, 5/8-inch fire-rated ($13–$30 a sheet) on a ceiling under living space. The whole garage runs $1,100–$3,500.

Board price vs. what you pay — the Tallahassee drywall bill

A 4×8 sheet of 1/2-inch drywall costs $10–$20 at the store, and all the materials for a 12×12 room run $200–$400, but the room hung and finished in Tallahassee is $715–$1,700. The difference pays for a hanger, a finisher who comes back two or three times as coats dry, sanding, cleanup and a warranty on cracks.

Hanging board is the easy half and the one DIYers can do; a $40-a-day lift rental makes ceilings possible. Taping and finishing is the skilled half: a poor Level 4 job shows every joint once the paint goes on. If you do anything yourself, hang it and hire the finish at about $0.50–$1.50 per sq ft.

What's included in a Tallahassee drywall quote (and what costs extra)

A standard installed price covers the board, screws, tape, corner bead and joint compound, hanging, taping, three coats of mud, sanding to the finish level named, and a sweep-out. The headline price often leaves out:

  • Primer and paint — a separate trade in most Tallahassee quotes; even a bare-minimum coat of primer is extra unless listed
  • Debris haul-away — $300–$500 to dispose of old drywall from a room, or $45–$180 per 100 sq ft to tear out and remove
  • Texture — $70–$180 per 100 sq ft to apply or match; a Level 5 skim is $1.60–$3.20 per sq ft
  • Asbestos or lead testing — $30–$75 for a mail-in texture sample, $250–$850 for a professional survey, in homes built before 1980

Ask how long the company warranties cracks and nail pops; good finishers put a year in writing.

What Affects Drywall Costs in Tallahassee

Finish level

Level 4, the standard for painted walls, is $1.35–$2.95 per sq ft in Tallahassee; Level 5, a full skim coat for glossy paint or strong light, is $1.60–$3.20. Level 3 is only for heavy texture. Get the level written on the quote.

Ceilings, height and access

Ceiling board is heavier to hang and slower to finish; a 12×12 ceiling replaced runs $450–$1,350. Rooms over 8–10 ft add about 10–30%, and stairwells need scaffolding.

Repair size and count

A small hole is $65–$225, a large one $135–$400, cracks and nail pops $90–$355. Several small repairs on one visit cost far less than three separate calls at the $110–$180 minimum.

Water damage and mold

Cutting out wet board and replacing it is $270–$1,800. If mold has set in behind the wall, remediation is a separate trade at $1,500–$3,000 per 100 sq ft, and the leak has to be fixed first.

Local rules

Florida does not license drywall contractors at state level, so check your county or city license and the company's insurance before work starts in Tallahassee. The garage side of a wall shared with the house needs gypsum board under the building code, and a garage ceiling under living space 5/8-inch fire-rated board; bathrooms and flood-prone rooms should get moisture-resistant board ($160–$320 per 100 sq ft).

Labor rates in Tallahassee

Labor is about 70% of the bill. Tallahassee is a smaller market; a room of drywall here is about 12% below the US typical of $1,250. Drywall contractors here charge about $40–$90 an hour, with a $110–$180 minimum for small repairs.

Texture and old finishes

Matching texture adds $70–$180 per 100 sq ft; scraping popcorn $135–$400. Plaster walls in older Tallahassee homes cost more to patch ($135–$1,050) than drywall, and a full skim coat over them is $0.90–$2.70 per sq ft.

How to Save Money on Drywall in Tallahassee
  1. Bundle the small repairs.Most Tallahassee companies charge a $110–$180 minimum. One visit for five holes costs about the same as one visit for one hole.
  2. Specify Level 4, not Level 5.Level 4 ($1.35–$2.95 per sq ft) is right for flat and eggshell paint. Pay for Level 5 ($1.60–$3.20) only where glossy paint or raking light will show joints.
  3. Skim instead of replacing.Sound walls with ugly texture or lots of nail pops can be skim-coated for $0.90–$2.70 per sq ft, about half the price of new board, and with no demolition dust.
  4. Hang it yourself, hire the finish.Materials for a 12×12 room are $200–$400 and a lift rents for about $40 a day. Then pay a finisher about $0.50–$1.50 per sq ft for the part that shows.
  5. Fix the leak before the drywall.A $270–$1,800 water-damage repair under a live leak will be back in a month. Plumber or roofer first, drywall second, and keep the repair receipts for insurance.
  6. Get the finish level and extras in writing.Primer, texture matching, debris haul-away and moving furniture are the usual add-ons. A quote that lists them is cheaper to compare and harder to pad later.
Drywall Cost in Tallahassee: What the Quote Should Include

Tallahassee drywall companies often quote by the sheet or the square foot over the phone. Before you agree to the work, get these in writing:

  • The finish level by number (Level 4 for paint; Level 5 for smooth or glossy walls)
  • Board type and thickness for each room: 1/2-inch, 5/8-inch fire-rated, moisture-resistant, soundproof
  • Square footage or sheet count the price is based on
  • Whether primer is included, and who paints
  • Texture: match existing, apply new, or leave smooth
  • Demolition, debris haul-away and floor protection
  • Minimum charge and the number of visits (hanging, coats, sanding)
  • Warranty on cracks, nail pops and seams
Frequently asked questions — Drywall cost in Tallahassee
How much does drywall cost in Tallahassee?

$715–$1,700 to hang and finish one 12×12 room, labor and materials, and $1,100 is typical. That's $1.35–$2.95 per sq ft, or $45–$90 a sheet.

How much does drywall repair cost in Tallahassee?

$65–$225 for a small hole, $135–$400 for a large one, $90–$355 for cracks and nail pops, and $270–$1,800 for water damage. Most companies charge a $110–$180 minimum per visit.

What does drywall cost per square foot in Tallahassee?

$1.35–$2.95 per sq ft hung and finished to Level 4, labor and materials. Level 5 smooth is $1.60–$3.20; skim-coating existing walls $0.90–$2.70.

How much does it cost to fix a ceiling in Tallahassee?

$225–$1,050 for a sag, stain or hole, and $450–$1,350 to tear out and replace a whole 12×12 room ceiling. Water damage with the repair runs $495–$2,850.

Can I hang drywall myself?

Hanging, yes: materials for a room are $200–$400 and a lift rents for about $40 a day. Finishing is the skilled part; most DIYers hire it out at about $0.50–$1.50 per sq ft.

How much does it cost to remove a popcorn ceiling in Tallahassee?

$135–$400 per 100 sq ft to scrape, skim and prime an asbestos-free ceiling. Test first in any home built before 1980 ($30–$75 by mail); asbestos abatement costs far more.

How much is a skim coat in Tallahassee?

$0.90–$2.70 per sq ft, or $355–$715 for the walls of a 12×12 room. It smooths texture and small damage without new board, but the room must be repainted after.

Do I need a permit for drywall?

Florida does not license drywall contractors at state level, so check your county or city license and the company's insurance before work starts in Tallahassee. The garage side of a wall shared with the house needs gypsum board under the building code, and a garage ceiling under living space 5/8-inch fire-rated board; bathrooms and flood-prone rooms should get moisture-resistant board ($160–$320 per 100 sq ft).

How much does it cost to drywall a garage or a whole house in Tallahassee?

$1,100–$3,500 for a two-car garage, walls and ceiling, with fire-rated board where the code requires it. A whole 2,000 sq ft house is $8,250–$25,600 hung and finished.

What's included in a Tallahassee drywall quote?

Board, tape, mud, hanging, finishing to the level named, and cleanup. Often extra: primer and paint, debris haul-away ($300–$500), texture ($70–$180 per 100 sq ft) and asbestos testing in older homes.

Prices verified November 2026 · Cross-referenced against 83+ American pricing sources · See methodology

Prices for the Tallahassee metro area, November 2026. Outer suburbs may vary.

Our methodology
These are independent estimates built from public cost guides, dated city price pages, contractor and retailer price lists, federal producer-price and wage data. No drywall company can pay to change them, so always get a couple of quotes. Last reviewed November 2026. Read our full methodology →

Get a fair drywall quote in Tallahassee

Local drywall contractors · Free quotes · No obligation, no spam.

Get quotes in Tallahassee →Max 2 drywall contractors will contact you
Get quotes in TallahasseeMax 2 drywall contractors · free · no spam→