Skip to content
Independent United States Cost GuidesPrices verified November 2026 · 39 trades · 195 US cities · 221+ sources For pros →
Get a fair quote

Cost guides

Plumbing & water4 trades
Electrical & energy5 trades
Renovation8 trades
Structural7 trades
Outdoor & yard7 trades
Cleaning & maintenance8 trades

More

Get a fair quote
Cost guide

How much does drywall cost in Worcester?

By Our research team · Last verified · Methodology

Updated November 2026Independently researched12 min read
Drywall cost

Drywall costs in Worcester

Worcester, MAChange location
Get free quotesFree · no obligation · max 2 pros
Normal range for Worcester, MA
$915–$2,150per room

Drywalling a 12×12 room in Worcester costs $915–$2,150 including board, mud, tape and a paint-ready finish. $1,450 is the going rate; by the sheet it's $55–$110 hung and finished.

How we get this data
Typical
$1,450
Low end
$630
High end
$3,450
Per 12×12 room
$915–$2,150
Per sq ft (hang + finish)
$1.65–$3.55
Small hole patch
$85–$285
Water-damage repair
$345–$2,300

Want an exact price for your job?

Tell us the job. Casey checks it by text, then up to 2 local drywall contractors send you a real quote. Free, no obligation.

Get my fair quote →
Typical drywall price: Worcester vs nearby citiesTypical price, per room. The line marks the US typical.
Worcester, MAThis guide $1,450
Boston, MA $1,350
Hartford, CT $1,250
New Haven, CT $1,250

The typical Worcester price is $1,450, 16% above the US typical of $1,250.

Where Worcester sits among 195 US metrosNumber of metros at each typical drywall price, per room.

Worcester's price band

Worcester is pricier than 95% of the 195 US metros we price for drywall work.

Hanging and finishing drywall costs $1.65–$3.55 per sq ft in Worcester, or $55–$110 a sheet. A small hole patch is $85–$285, a large one $170–$515, and water-damage repair $345–$2,300. Skim-coating a room's walls smooth runs $460–$915.

Worcester drywall installers earn a median $80,280 a year (BLS, May 2025), about 36% above the US median. Massachusetts bans clean gypsum wallboard from landfill disposal, so scrap costs more to get rid of here.

Installed prices include materials and labor to a paint-ready finish. Patches, water stains and ceilings are the jobs most Worcester homeowners call about; new drywall for a whole room or house is priced by the square foot.

Comparing cities, or after the US-wide picture? See the national guide: Drywall cost in the USA.

Quick answer

$915–$2,150 to hang and finish drywall in one 12×12 room in Worcester, labor and materials — typically $1,450. That's $1.65–$3.55 per sq ft or $55–$110 a sheet; a small hole patch is $85–$285 and water-damage repair $345–$2,300. Verified November 2026. Get free Worcester quotes →

  • One 12×12 room hung and finished: $915–$2,150 ($1,450 typical)
  • Per sq ft $1.65–$3.55; per sheet $55–$110
  • Small hole $85–$285; large hole $170–$515; water damage $345–$2,300
  • Skim coat $1.15–$3.45 per sq ft; popcorn removal $170–$515 per 100 sq ft
  • Priciest area to work in: Downtown & the Canal District; lowest quotes: WPI, Clark & the West Side

Prices verified November 2026 · Cross-referenced against 83+ American pricing sources · See methodology

Detailed pricing — Drywall cost in Worcester 2026

Installed prices include labor and materials to a paint-ready finish; repairs are per job including the visit. Worcester metro, re-verified November 2026.

ServiceLowTypicalHigh
Hang and finish drywall, one 12×12 room (walls and ceiling, about 500 sq ft)per room$915per room$1,450$2,150
Drywall contractor hourly rate/hr$50/hr$80$115
Hang and finish, standard Level 4 finish, per 100 sq ft (labor and materials)per 100 sq ft$165per 100 sq ft$250$355
Level 5 smooth finish on new drywall, per 100 sq ftper 100 sq ft$195per 100 sq ft$305$390
One 4×8 sheet of 1/2-inch drywall, hung and finishedper sheet$55per sheet$80$110
Small hole or dent repair (under 4 in.), one visitper job$85per job$170$285
Large hole repair (6–12 in., new piece let in and finished)per job$170per job$315$515
Cracks, nail pops and seam repairper job$115per job$230$460
Water-damaged drywall: cut out, replace and finishper job$345per job$1,050$2,300
Ceiling drywall repair (sag, stain or hole)per job$285per job$685$1,350
Replace a 12×12 room ceiling: tear out, new drywall, finishedper room$565per room$1,000$1,700
Skim coat existing walls to a smooth finish, per 100 sq ftper 100 sq ft$115per 100 sq ft$150$345
Skim coat one 12×12 room, walls onlyper room$460per room$630$915
Wall texture (orange peel, knockdown, skip trowel), per 100 sq ftper 100 sq ft$90per 100 sq ft$145$225
Popcorn ceiling removal and re-skim (no asbestos), per 100 sq ftper 100 sq ft$170per 100 sq ft$285$515
Corner bead repair or replacement (one damaged outside corner)per corner$85per corner$170$345
New partition wall, framed and drywalled both sides (8 ft high), per linear ftper linear ft$30per linear ft$50$90
Soundproof drywall (QuietRock or double 5/8-inch layer), per 100 sq ft installedper 100 sq ft$380per 100 sq ft$570$815
Moisture- and mold-resistant drywall (green or purple board), per 100 sq ft installedper 100 sq ft$195per 100 sq ft$280$390
Drywall a 2-car garage, walls and ceiling (5/8-inch fire-rated where code requires)per garage$1,350per garage$2,450$4,250
Drywall a whole 2,000 sq ft house (about 7,000 sq ft of board), hung and finishedper house$10,050per house$16,750$31,200
Remove and dispose of old drywall, per 100 sq ftper 100 sq ft$55per 100 sq ft$115$225
Plaster wall or ceiling repair (cracks, holes, loose plaster)per job$170per job$460$1,350
Drywall crew day rate (two people, materials extra)per day$800per day$1,250$1,850
drywall jobs in Worcester: what they costPer 100 sq ft, low to high with the typical price marked. Every line is in the table above.
Soundproof drywall (QuietRock or double 5/8-inch layer), per 100 sq ft installed $570$380–$815
Level 5 smooth finish on new drywall, per 100 sq ft $305$195–$390
Popcorn ceiling removal and re-skim (no asbestos), per 100 sq ft $285$170–$515
Moisture- and mold-resistant drywall (green or purple board), per 100 sq ft installed $280$195–$390
Hang and finish, standard Level 4 finish, per 100 sq ft (labor and materials) $250$165–$355
Skim coat existing walls to a smooth finish, per 100 sq ft $150$115–$345
Wall texture (orange peel, knockdown, skip trowel), per 100 sq ft $145$90–$225
Remove and dispose of old drywall, per 100 sq ft $115$55–$225
Already got a quote?
Check it against these Worcester prices — free, no sign-up.
$

Got it as a PDF or photo? Upload up to 3 quotes and compare →

Free quotes

Get free quotes from up to 2 local drywall contractors in Worcester

Free · No obligation · About a minute

  1. 1The job
  2. 2Budget
  3. 3Your details
Casey · LocalGoingRate

What do you need a price on?

Tap one to start.

Prices verified November 2026 · Cross-referenced against 83+ American pricing sources · See methodology

Figures are for the Worcester metro area. Trip fees can apply on the far edges; apartments and pre-war buildings in Downtown & the Canal District cost the most to work in.

How drywall costs vary across Worcester

Drywall prices across Worcester

Same sheets, four price bands. Parking, access and older walls push Downtown & the Canal District to the top; WPI, Clark & the West Side sits at or below the city typical.

Drywall prices across WorcesterTypical range by part of the metro, per room. The line marks the Worcester typical.
Downtown & the Canal District8–12% above the city average $990–$2,400per room
Main South & Vernon HillStandard to 6% above $940–$2,300per room
WPI, Clark & the West Side3–5% below $870–$2,100per room
Shrewsbury, Auburn & LeominsterStandard; bigger rooms common $915–$2,200per room

Downtown & the Canal District

8–12% above the city average
Downtown, Canal District, Shrewsbury Street
Per 12×12 room
$990–$2,400 per room
Typical repair
$185–$575 / large hole patch

Older buildings, parking and elevators slow every visit, and where the walls are plaster rather than drywall, patches take longer and cost more.

Main South & Vernon Hill

Standard to 6% above
Main South, Vernon Hill, Union Hill
Per 12×12 room
$940–$2,300 per room
Typical repair
$175–$545 / large hole patch

A mix of older homes and new infill. Older houses here often have textured or much-patched walls, which push a repair toward the top of the range.

WPI, Clark & the West Side

3–5% below
WPI, Clark University, West Side, Tatnuck
Per 12×12 room
$870–$2,100 per room
Typical repair
$160–$500 / large hole patch

Student rentals and small houses. Companies here price small patch jobs keenly, but a plaster ceiling in an old house still costs full rate.

Shrewsbury, Auburn & Leominster

Standard; bigger rooms common
Shrewsbury, Auburn, Leominster, Fitchburg
Per 12×12 room
$915–$2,200 per room
Typical repair
$170–$530 / large hole patch

Newer homes with easy access and drywall throughout. Visits are quick; the bigger bills are garages, additions and whole-house repaints after a skim coat.

What you'll actually pay — job by job

Real-World Drywall Costs in Worcester

Here's what common drywall jobs cost in Worcester in 2026, labor and materials to a paint-ready finish.

Doorknob hole in a bedroom wall — 1 visit, 1–2 hours

$85–$285

Cut a clean square, screw in a backer, let in a patch, tape and mud in two or three coats, sand. Most Worcester companies charge their $145–$230 minimum for a single patch, so add other holes to the same visit.

Ceiling stain and sag after a bathroom leak

$630–$3,650

Water-damaged board cut out and replaced ($345–$2,300) plus the ceiling repair and texture match ($285–$1,350). Fix the leak first; the drywall company won't warranty a patch under a live drip.

Drywall one 12×12 room (garage conversion, addition or basement) — 2–4 days

$915–$2,150

Walls and ceiling hung and finished to Level 4 for $1,450 typical, about 15 sheets. Moisture-resistant board for a bathroom or basement adds about $30 per 100 sq ft; paint is separate.

Scrape a popcorn ceiling in a living room (about 300 sq ft)

$510–$1,545

Scrape, skim smooth and prime at $170–$515 per 100 sq ft. In a home built before 1980, a lab test ($30–$75) comes first; if it's positive, abatement is a different trade at a much higher price.

Skim coat a textured bedroom smooth

$460–$915

Two thin coats of compound over the walls of a 12×12 room, sanded to Level 5, at $1.15–$3.45 per sq ft. The ceiling adds $100–$150 per 100 sq ft, and new paint is a must afterwards.

How much does drywall cost in Worcester?

Between $915 and $2,150 for one 12×12 room, walls and ceiling, hung and finished ready for paint, and $1,450 is the price most Worcester homeowners pay. The board is cheap: about $10–$20 a sheet, or $200–$400 in materials for the whole room. The rest is two or three visits by a hanger and a finisher, and the finishing is what you're paying for.

Old texture costs extra to deal with: $170–$515 per 100 sq ft to scrape and re-skim a popcorn ceiling, plus an asbestos test ($30–$75 by mail) in any home built before 1980. Re-checked against 83 sources in November 2026.

Drywall prices in Worcester (2026): new board, repairs and finishes

Hang and finish costs $1.65–$3.55 per sq ft in Worcester, a small hole patch $85–$285, and a skim coat $1.15–$3.45 per sq ft.

Line on the quoteLowTypicalHigh
Hang and finish, standard Level 4 finish, per 100 sq ft (labor and materials)$165$250$355
One 4×8 sheet of 1/2-inch drywall, hung and finished$55$80$110
Small hole or dent repair (under 4 in.), one visit$85$170$285
Large hole repair (6–12 in., new piece let in and finished)$170$315$515
Water-damaged drywall: cut out, replace and finish$345$1,050$2,300
Replace a 12×12 room ceiling: tear out, new drywall, finished$565$1,000$1,700
Skim coat existing walls to a smooth finish, per 100 sq ft$115$150$345
Popcorn ceiling removal and re-skim (no asbestos), per 100 sq ft$170$285$515

Repair or replace in Worcester: a wall with a few holes is a $170–$515 patch job; a wall with old texture or dozens of nail pops is a $1.15–$3.45 per sq ft skim coat; only a wall that is crumbling, moldy or wet through needs new board at $1.65–$3.55 per sq ft.

What moves a drywall quote in Worcester:

  • Finish level — Level 4 for painted walls is $1.65–$3.55 per sq ft; a Level 5 smooth finish $1.95–$3.90.
  • Ceilings and height — ceiling board is slower to hang; rooms over 8–10 ft add about 10–30%.
  • Board type — moisture-resistant board is $195–$390 per 100 sq ft installed; soundproof $380–$815.
  • Texture — matching orange peel or knockdown adds $90–$225 per 100 sq ft; scraping popcorn $170–$515.
  • Minimum charge — a single small patch costs $85–$285 because most companies charge a $145–$230 minimum visit.

Ask every Worcester company for the same five things: the finish level by number, whether primer is included, who hauls the debris, how texture will be matched, and the minimum charge. Compare those, not the headline price. Get a quote for your drywall job →

Drywall Cost in Worcester by Room and Project Size

Quick answer

One 12×12 room: $915–$2,150. Two-car garage, walls and ceiling: $1,350–$4,250. Whole 2,000 sq ft house: $10,050–$31,200. Per sheet: $55–$110 hung and finished.

Worked example: a Worcester living room of about 300 sq ft of wall with a popcorn ceiling. Scraping and re-skimming the ceiling at $285 per 100 sq ft is about $855, and skim-coating the walls smooth at $150 per 100 sq ft about $450, so roughly $1,305 before paint. A lab test for asbestos ($30–$75) comes first in a home built before 1980.

Whole-house math: a 2,000 sq ft house has about 7,000 sq ft of wall and ceiling. At $1.65–$3.55 per sq ft that is $10,050–$31,200 hung and finished, which is why a gut remodel's drywall line is one of its biggest. Booking the drywall and paint crews back to back saves a second round of floor protection and cleanup.

Worcester Drywall Costs by Board and Finish Type

Board or finish typeCostBest for
Standard 1/2-inch drywall$165–$355 per 100 sq ftWalls in living rooms, bedrooms and hallways. The sheet itself is $10–$20; most of the price is hanging and finishing.
5/8-inch Type X fire-rated$13–$30 per sheet (board only)Required on a garage ceiling under living space; common on the garage wall shared with the house (the code minimum there is 1/2-inch) and in furnace rooms. Heavier and stiffer, so it also resists sag on ceilings.
Moisture- and mold-resistant (green or purple board)$195–$390 per 100 sq ft installedBathrooms, laundry rooms, basements and garages. Not a tile backer inside a shower; that needs cement board.
Soundproof (QuietRock or double layer)$380–$815 per 100 sq ft installedBedroom walls next to a living room, home offices, shared walls in a duplex. The sheet alone is $30–$100.
Lightweight 1/2-inch (UltraLight)$165–$355 per 100 sq ftCeilings and DIY jobs: lighter than regular 1/2-inch board at the same price, so it is easier to lift overhead.
Level 5 smooth finish$195–$390 per 100 sq ftWalls that get glossy paint, dark colors or raking light from big windows. A thin skim coat over the whole sheet hides every joint.
Skim coat over existing walls$115–$345 per 100 sq ftSmoothing textured or damaged walls without tearing them out. Cheaper than new drywall when the old board is sound.
Plaster (repair or veneer)$170–$1,350 per repairPre-1950 homes with plaster-and-lath walls. Patching plaster costs more per square foot than drywall; replacing it with drywall is a bigger job.
Cost by board or finish type in WorcesterTypical range, per 100 sq ft.
Standard 1/2-inch drywall $165–$355per 100 sq ft
Lightweight 1/2-inch (UltraLight) $165–$355per 100 sq ft
Level 5 smooth finish $195–$390per 100 sq ft
Skim coat over existing walls $115–$345per 100 sq ft
Worcester tip: for a basement or bathroom, ask for moisture- and mold-resistant board ($195–$390 per 100 sq ft installed). It costs little more than standard board and saves a $345–$2,300 repair after the first leak.

Board price vs. what you pay — the Worcester drywall bill

A 4×8 sheet of 1/2-inch drywall costs $10–$20 at the store, and all the materials for a 12×12 room run $200–$400, but the room hung and finished in Worcester is $915–$2,150. The difference pays for a hanger, a finisher who comes back two or three times as coats dry, sanding, cleanup and a warranty on cracks.

Hanging board is the easy half and the one DIYers can do; a $40-a-day lift rental makes ceilings possible. Taping and finishing is the skilled half: a poor Level 4 job shows every joint once the paint goes on. If you do anything yourself, hang it and hire the finish at about $0.50–$1.50 per sq ft.

What's included in a Worcester drywall quote (and what costs extra)

A standard installed price covers the board, screws, tape, corner bead and joint compound, hanging, taping, three coats of mud, sanding to the finish level named, and a sweep-out. The headline price often leaves out:

  • Primer and paint — a separate trade in most Worcester quotes; even a bare-minimum coat of primer is extra unless listed
  • Debris haul-away — $300–$500 to dispose of old drywall from a room, or $55–$225 per 100 sq ft to tear out and remove
  • Texture — $90–$225 per 100 sq ft to apply or match; a Level 5 skim is $1.95–$3.90 per sq ft
  • Asbestos or lead testing — $30–$75 for a mail-in texture sample, $250–$850 for a professional survey, in homes built before 1980

Ask how long the company warranties cracks and nail pops; good finishers put a year in writing.

What Affects Drywall Costs in Worcester

Finish level

Level 4, the standard for painted walls, is $1.65–$3.55 per sq ft in Worcester; Level 5, a full skim coat for glossy paint or strong light, is $1.95–$3.90. Level 3 is only for heavy texture. Get the level written on the quote.

Ceilings, height and access

Ceiling board is heavier to hang and slower to finish; a 12×12 ceiling replaced runs $565–$1,700. Rooms over 8–10 ft add about 10–30%, and stairwells need scaffolding.

Repair size and count

A small hole is $85–$285, a large one $170–$515, cracks and nail pops $115–$460. Several small repairs on one visit cost far less than three separate calls at the $145–$230 minimum.

Water damage and mold

Cutting out wet board and replacing it is $345–$2,300. If mold has set in behind the wall, remediation is a separate trade at $1,500–$3,000 per 100 sq ft, and the leak has to be fixed first.

Local rules

A like-for-like drywall repair or replacement in Worcester usually needs no permit; a permit ($50–$150 where needed) comes in when walls move, the work is the garage-to-house separation or a remodel is already permitted. In homes built before 1978, a contractor who disturbs painted surfaces must follow the federal lead-safe rule, and texture or joint compound from before about 1980 should be tested for asbestos before sanding.

Labor rates in Worcester

Labor is about 70% of the bill. Worcester is a smaller market; a room of drywall here is about 16% above the US typical of $1,250. Drywall contractors here charge about $50–$115 an hour, with a $145–$230 minimum for small repairs.

Texture and old finishes

Matching texture adds $90–$225 per 100 sq ft; scraping popcorn $170–$515. Plaster walls in older Worcester homes cost more to patch ($170–$1,350) than drywall, and a full skim coat over them is $1.15–$3.45 per sq ft.

How to Save Money on Drywall in Worcester
  1. Bundle the small repairs.Most Worcester companies charge a $145–$230 minimum. One visit for five holes costs about the same as one visit for one hole.
  2. Specify Level 4, not Level 5.Level 4 ($1.65–$3.55 per sq ft) is right for flat and eggshell paint. Pay for Level 5 ($1.95–$3.90) only where glossy paint or raking light will show joints.
  3. Skim instead of replacing.Sound walls with ugly texture or lots of nail pops can be skim-coated for $1.15–$3.45 per sq ft, about half the price of new board, and with no demolition dust.
  4. Hang it yourself, hire the finish.Materials for a 12×12 room are $200–$400 and a lift rents for about $40 a day. Then pay a finisher about $0.50–$1.50 per sq ft for the part that shows.
  5. Fix the leak before the drywall.A $345–$2,300 water-damage repair under a live leak will be back in a month. Plumber or roofer first, drywall second, and keep the repair receipts for insurance.
  6. Get the finish level and extras in writing.Primer, texture matching, debris haul-away and moving furniture are the usual add-ons. A quote that lists them is cheaper to compare and harder to pad later.
Drywall Cost in Worcester: What the Quote Should Include

Worcester drywall companies often quote by the sheet or the square foot over the phone. Before you agree to the work, get these in writing:

  • The finish level by number (Level 4 for paint; Level 5 for smooth or glossy walls)
  • Board type and thickness for each room: 1/2-inch, 5/8-inch fire-rated, moisture-resistant, soundproof
  • Square footage or sheet count the price is based on
  • Whether primer is included, and who paints
  • Texture: match existing, apply new, or leave smooth
  • Demolition, debris haul-away and floor protection
  • Minimum charge and the number of visits (hanging, coats, sanding)
  • Warranty on cracks, nail pops and seams
Frequently asked questions — Drywall cost in Worcester
How much does drywall cost in Worcester?

$915–$2,150 to hang and finish one 12×12 room, labor and materials, and $1,450 is typical. That's $1.65–$3.55 per sq ft, or $55–$110 a sheet.

How much does drywall repair cost in Worcester?

$85–$285 for a small hole, $170–$515 for a large one, $115–$460 for cracks and nail pops, and $345–$2,300 for water damage. Most companies charge a $145–$230 minimum per visit.

What does drywall cost per square foot in Worcester?

$1.65–$3.55 per sq ft hung and finished to Level 4, labor and materials. Level 5 smooth is $1.95–$3.90; skim-coating existing walls $1.15–$3.45.

How much does it cost to fix a ceiling in Worcester?

$285–$1,350 for a sag, stain or hole, and $565–$1,700 to tear out and replace a whole 12×12 room ceiling. Water damage with the repair runs $630–$3,650.

Can I hang drywall myself?

Hanging, yes: materials for a room are $200–$400 and a lift rents for about $40 a day. Finishing is the skilled part; most DIYers hire it out at about $0.50–$1.50 per sq ft.

How much does it cost to remove a popcorn ceiling in Worcester?

$170–$515 per 100 sq ft to scrape, skim and prime an asbestos-free ceiling. Test first in any home built before 1980 ($30–$75 by mail); asbestos abatement costs far more.

How much is a skim coat in Worcester?

$1.15–$3.45 per sq ft, or $460–$915 for the walls of a 12×12 room. It smooths texture and small damage without new board, but the room must be repainted after.

Do I need a permit for drywall?

A like-for-like drywall repair or replacement in Worcester usually needs no permit; a permit ($50–$150 where needed) comes in when walls move, the work is the garage-to-house separation or a remodel is already permitted. In homes built before 1978, a contractor who disturbs painted surfaces must follow the federal lead-safe rule, and texture or joint compound from before about 1980 should be tested for asbestos before sanding.

How much does it cost to drywall a garage or a whole house in Worcester?

$1,350–$4,250 for a two-car garage, walls and ceiling, with fire-rated board where the code requires it. A whole 2,000 sq ft house is $10,050–$31,200 hung and finished.

What's included in a Worcester drywall quote?

Board, tape, mud, hanging, finishing to the level named, and cleanup. Often extra: primer and paint, debris haul-away ($300–$500), texture ($90–$225 per 100 sq ft) and asbestos testing in older homes.

Prices verified November 2026 · Cross-referenced against 83+ American pricing sources · See methodology

Prices for the Worcester metro area, November 2026. Outer suburbs may vary.

Our methodology
These are independent estimates built from public cost guides, dated city price pages, contractor and retailer price lists, federal producer-price and wage data. No drywall company can pay to change them, so always get a couple of quotes. Last reviewed November 2026. Read our full methodology →

Get a fair drywall quote in Worcester

Local drywall contractors · Free quotes · No obligation, no spam.

Get quotes in Worcester →Max 2 drywall contractors will contact you
Get quotes in WorcesterMax 2 drywall contractors · free · no spam→