Skip to content
Independent United States Cost GuidesPrices verified November 2026 · 39 trades · 195 US cities · 221+ sources For pros →
Get a fair quote

Cost guides

Plumbing & water4 trades
Electrical & energy5 trades
Renovation8 trades
Structural7 trades
Outdoor & yard7 trades
Cleaning & maintenance8 trades

More

Get a fair quote
Cost guide

How much does flooring cost in Tucson?

By Our research team · Last verified · Methodology

Updated November 2026Independently researched11 min read
Flooring cost

Flooring costs in Tucson

Tucson, AZChange location
Get free quotesFree · no obligation · max 2 pros
Normal range for Tucson, AZ
$1,850–$5,550per 500 sq ft

Most 500 sq ft LVP floors in Tucson cost $1,850–$5,550 installed, materials and labor, with $3,250 the typical bill. That is $4–$11 a square foot; carpet runs $3–$9 and solid hardwood $7–$25.

How we get this data
Typical
$3,250
Low end
$1,150
High end
$7,900
500 sq ft LVP
$1,850–$5,550
LVP per sq ft
$4–$11
Carpet per sq ft
$3–$9
Solid hardwood per sq ft
$7–$25

Want an exact price for your job?

Tell us the job. Casey checks it by text, then up to 2 local flooring installers send you a real quote. Free, no obligation.

Get my fair quote →
Typical flooring price: Tucson vs nearby citiesTypical price, per 500 sq ft. The line marks the US typical.
Las Vegas, NV $3,500
Mesa, AZ $3,300
Phoenix, AZ $3,300
Tucson, AZThis guide $3,250
El Paso, TX $3,100

The typical Tucson price is $3,250, 7% below the US typical of $3,500.

Where Tucson sits among 195 US metrosNumber of metros at each typical flooring price, per 500 sq ft.

Tucson's price band

Tucson is cheaper than 79% of the 195 US metros we price for flooring work.

A 500 sq ft luxury vinyl plank floor in Tucson costs $1,850–$5,550 installed, and $3,250 is what most homeowners pay. Per square foot, LVP is $4–$11, carpet $3–$9, laminate $4–$10 and solid hardwood $7–$25. Pulling out the old floor adds $1–$3 a foot.

Arizona issues an R-8 Floor Covering license for carpet, tile, wood and vinyl work, and requires it once labor and materials pass $1,000 or a permit is needed.

Installed prices include the product, labor and standard underlayment. Stairs ($55–$230 a step in wood or LVP), removal ($1–$3 a square foot) and baseboards ($4–$9 a linear foot) are the lines Tucson homeowners most often forget to budget.

Comparing cities, or after the US-wide picture? See the national guide: Flooring cost in the USA.

Quick answer

$1,850–$5,550 to install 500 sq ft of luxury vinyl plank in Tucson, materials and labor — typically $3,250. Per square foot installed: LVP $4–$11, carpet $3–$9, laminate $4–$10, solid hardwood $7–$25. Verified November 2026. Get free Tucson quotes →

  • 500 sq ft of LVP installed: $1,850–$5,550 ($3,250 typical)
  • Per sq ft: LVP $4–$11; laminate $4–$10; carpet $3–$9
  • Hardwood: engineered $7–$19, solid $7–$25 per sq ft; refinishing $3–$7
  • Removal $1–$3 per sq ft; subfloor repair $3–$9; stairs $55–$230 a step in wood
  • Priciest area to work in: Downtown & Fourth Avenue; lowest quotes: University & Midtown

Prices verified November 2026 · Cross-referenced against 84+ American pricing sources · See methodology

Detailed pricing — Flooring cost in Tucson 2026

Installed prices include materials and labor; removal, subfloor work and furniture moving are their own lines. Tucson metro, re-verified November 2026.

ServiceLowTypicalHigh
Luxury vinyl plank (LVP), 500 sq ft, materials and laborper 500 sq ft$1,850per 500 sq ft$3,250$5,550
Luxury vinyl plank (LVP), installedper sq ft$4per sq ft$6$11
Rigid-core vinyl plank (SPC or WPC), installedper sq ft$5per sq ft$7$12
Sheet vinyl, installedper sq ft$2per sq ft$4$7
Laminate, installedper sq ft$4per sq ft$5$10
Engineered hardwood, installedper sq ft$7per sq ft$11$19
Solid hardwood, installedper sq ft$7per sq ft$13$25
Bamboo flooring, installedper sq ft$6per sq ft$9$16
Carpet with pad, mid-grade, installedper sq ft$3per sq ft$5$9
Ceramic or porcelain tile floor, installedper sq ft$9per sq ft$16$25
Refinish hardwood floors (sand, stain and finish)per sq ft$3per sq ft$4$7
Refinish 500 sq ft of hardwoodper 500 sq ft$1,350per 500 sq ft$2,200$3,550
Labor only to lay a floating floor you bought (LVP or laminate)per sq ft$2per sq ft$3$4
Old flooring removal and disposalper sq ft$1per sq ft$2$3
Subfloor repair or replacement (plywood or OSB)per sq ft$3per sq ft$5$9
Baseboards, supply and installper linear ft$4per linear ft$6$9
Carpet a stair (tread and riser)per step$25per step$40$60
Hardwood or LVP stair treads and risersper step$55per step$110$230
Carpet one 12×12 bedroom (144 sq ft), with padper room$410per room$685$1,400
Whole home LVP, 1,500 sq ft, installedper home$5,550per home$9,750$16,700
Whole home solid hardwood, 2,000 sq ft, installedper home$14,950per home$26,200$46,750
Recarpet a 3-bedroom home, 1,500 sq ft, with padper home$4,250per home$7,100$14,250
Flooring installer hourly rate (small jobs and repairs)/hr$40/hr$60$95
Furniture moving by the crewper room$20per room$50$105
flooring jobs in Tucson: what they costPer sq ft, low to high with the typical price marked. Every line is in the table above.
Ceramic or porcelain tile floor, installed $16$9–$25
Solid hardwood, installed $13$7–$25
Engineered hardwood, installed $11$7–$19
Bamboo flooring, installed $9$6–$16
Rigid-core vinyl plank (SPC or WPC), installed $7$5–$12
Luxury vinyl plank (LVP), installed $6$4–$11
Laminate, installed $5$4–$10
Carpet with pad, mid-grade, installed $5$3–$9
Subfloor repair or replacement (plywood or OSB) $5$3–$9
Sheet vinyl, installed $4$2–$7
Refinish hardwood floors (sand, stain and finish) $4$3–$7
Labor only to lay a floating floor you bought (LVP or laminate) $3$2–$4
Already got a quote?
Check it against these Tucson prices — free, no sign-up.
$

Got it as a PDF or photo? Upload up to 3 quotes and compare →

Free quotes

Get free quotes from up to 2 local flooring installers in Tucson

Free · No obligation · About a minute

  1. 1The job
  2. 2Budget
  3. 3Your details
Casey · LocalGoingRate

What floor do you need a price on?

Tap one to start.

Prices verified November 2026 · Cross-referenced against 84+ American pricing sources · See methodology

Prices cover the Tucson metro. Outlying towns can run 5–10% lower; walk-ups and condos in Downtown & Fourth Avenue sit at the top of each range.

How flooring costs vary across Tucson

Flooring prices across Tucson

Where you live in the metro changes the labor and the prep, not the price of the plank. Older buildings in Downtown & Fourth Avenue take the longest; jobs in University & Midtown tend to come in at or under the city typical.

Flooring prices across TucsonTypical range by part of the metro, per 500 sq ft. The line marks the Tucson typical.
Downtown & Fourth Avenue6–12% above the city average $1,950–$6,200per 500 sq ft
South Tucson & SouthsideStandard to 6% above $1,900–$5,900per 500 sq ft
University & Midtown2–5% below $1,750–$5,450per 500 sq ft
Oro Valley, Marana & the east sideStandard; bigger jobs $1,800–$5,700per 500 sq ft

Downtown & Fourth Avenue

6–12% above the city average
Downtown, Fourth Avenue, Armory Park
500 sq ft LVP
$1,950–$6,200 per 500 sq ft
12×12 room
$610–$1,800 / 12×12 room in LVP

The priciest part of the metro for a crew to work in: tight parking, stairs to carry material up, and building rules on work hours. Ask whether carrying and disposal are in the price.

South Tucson & Southside

Standard to 6% above
South Tucson, Southside, Midvale Park
500 sq ft LVP
$1,900–$5,900 per 500 sq ft
12×12 room
$585–$1,700 / 12×12 room in LVP

Older housing stock where refinishing is as common as replacing. Expect standard per-square-foot rates and a bit more prep.

University & Midtown

2–5% below
University of Arizona, Midtown, Sam Hughes
500 sq ft LVP
$1,750–$5,450 per 500 sq ft
12×12 room
$545–$1,550 / 12×12 room in LVP

Rentals and small houses. Landlord jobs lean on cheap carpet and entry-level LVP, which keeps quotes a little under the city average.

Oro Valley, Marana & the east side

Standard; bigger jobs
Oro Valley, Marana, East Tucson, Vail
500 sq ft LVP
$1,800–$5,700 per 500 sq ft
12×12 room
$565–$1,650 / 12×12 room in LVP

Bigger homes and open floor plans. The per-square-foot rate is standard, but 1,500–2,000 sq ft jobs make the bill the largest in the metro.

What you'll actually pay — job by job

Real-World Flooring Costs in Tucson

Here's what common flooring jobs cost in Tucson in 2026, materials and labor for 500 sq ft of luxury vinyl plank.

Carpet out, LVP in: 500 sq ft open-plan living area — 1–2 days

$2,350–$7,050

The base job ($1,850–$5,550) plus pulling and hauling the old carpet ($500–$1,500). Most Tucson jobs land near $3,250 before removal; a rigid-core plank or glue-down install reaches the top.

Carpet one 12×12 bedroom with new pad — half a day

$410–$1,400

Mid-grade carpet, pad, tack strips and labor at $3–$9 a square foot. Old carpet removal is often included; ask. Stairs are extra at $25–$60 a step.

Refinish 500 sq ft of oak floors — 3–5 days with drying

$1,350–$3,550

Sand to bare wood, stain and three coats of finish at $3–$7 a square foot. About four-fifths of the bill is labor. Dustless sanding and dark stains add to it.

Solid hardwood, 500 sq ft, installed — 3–5 days

$3,500–$12,500

Oak plank nailed to a plywood subfloor at $7–$25 a square foot. Prefinished boards cost more to buy and less to lay; site-finished boards are the reverse. Engineered wood is $3,500–$9,500 for the same area.

Water-damaged floor: new subfloor patch plus LVP — 2 days

$875–$2,500

Replacing 100 sq ft of swollen subfloor ($300–$900) and laying LVP in the 12×12 room ($575–$1,600). Keep photos and the plumber's invoice: water damage is one of the biggest causes of homeowners insurance claims.

How much does flooring cost in Tucson?

Between $1,850 and $5,550 for 500 sq ft of LVP, materials and labor, and $3,250 is the price most Tucson homeowners pay. About half of that is the product; the rest is the crew's time, underlayment, transitions and the warranty on the work.

Whole-home jobs get a better rate per foot but a bigger bill: 1,500 sq ft of LVP is $5,550–$16,700, recarpeting a 3-bedroom home $4,250–$14,250, and 2,000 sq ft of solid hardwood $14,950–$46,750. Re-checked against 84 sources in November 2026.

Flooring prices in Tucson (2026): per square foot, installed

Luxury vinyl plank costs $4–$11 a square foot installed in Tucson, carpet $3–$9, laminate $4–$10, engineered hardwood $7–$19 and solid hardwood $7–$25.

Line on the quoteLowTypicalHigh
Luxury vinyl plank (LVP), per sq ft$4$6$11
Laminate, per sq ft$4$5$10
Carpet with pad, per sq ft$3$5$9
Engineered hardwood, per sq ft$7$11$19
Solid hardwood, per sq ft$7$13$25
Ceramic or porcelain tile, per sq ft$9$16$25
Refinish hardwood, per sq ft$3$4$7
Remove old flooring, per sq ft$1$2$3

Replace or refinish in Tucson: if there is solid oak under the carpet, sanding and refinishing at $4 a foot costs less than every new floor except budget carpet, and real estate agents report refinished wood recoups more than it costs at resale.

What moves a flooring quote in Tucson:

  • Material — carpet and sheet vinyl at $3–$7 a foot sit at the bottom; solid hardwood and tile at $7–$25 at the top.
  • What is under the old floor — subfloor repair runs $3–$9 a square foot where boards are soft or uneven.
  • Removal — $1–$3 a square foot; glued-down vinyl and tile cost the most to pull.
  • Stairs — $25–$60 a step in carpet, $55–$230 in wood or LVP treads.
  • Job size — small rooms pay a minimum charge; 1,500 sq ft whole-home jobs get a lower rate per foot ($5,550–$16,700 in LVP).

Ask every Tucson installer for the same six things: price per square foot with the product named, removal and disposal, subfloor repair rate, stairs and transitions, baseboards or shoe molding, and the labor warranty. Compare those, not the headline price. Get a quote for your flooring job →

Flooring Cost in Tucson by Home Size

Quick answer

LVP installed: 1,000 sq ft $4,000–$11,000, 1,500 sq ft $6,000–$16,500, 2,000 sq ft $8,000–$22,000. Carpet for the same areas: $3,000–$9,000, $4,500–$13,500, $6,000–$18,000. Solid hardwood, 2,000 sq ft: $14,950–$46,750.

Worked example: a Tucson 3-bedroom home with 1,500 sq ft of worn carpet. LVP through the living areas and hallway (1,000 sq ft, $6,000) plus new carpet in three bedrooms (500 sq ft, $2,500) comes to about $8,500 at typical prices, plus about $1,300 to pull and haul the old carpet.

Going all hardwood instead: 1,500 sq ft of solid oak at $19,500, or engineered wood at $16,500, with the staircase in matching wood treads adding $715–$3,000. That only makes sense if the house has a plywood subfloor and you plan to stay or sell to buyers who pay for wood.

Tucson Flooring Costs by Material

MaterialCostBest for
Luxury vinyl plank (LVP)$4–$11 per sq ftKitchens, basements and busy family rooms. Waterproof, click-lock, about 25 years of life. The most installed floor in the US.
Rigid-core vinyl plank (SPC or WPC)$5–$12 per sq ftUneven slabs and sunny rooms. Stone (SPC) or wood (WPC) core hides small subfloor dips and dents less than flexible vinyl.
Sheet vinyl$2–$7 per sq ftBathrooms, laundry rooms and rentals. Seamless and cheap; harder to repair one spot.
Laminate$4–$10 per sq ftBedrooms, living rooms and hallways on a budget. Hard wear layer, 15–25 years; most types swell if water sits.
Engineered hardwood$7–$19 per sq ftReal wood over concrete slabs and in humid climates. Can be refinished once or twice; 50+ years.
Solid hardwood$7–$25 per sq ftAbove-grade rooms on a plywood subfloor. Refinish every 7–10 years and it lasts 100+ years. Best resale value.
Bamboo$6–$16 per sq ftA hard, fast-growing wood look. Strand-woven bamboo is very hard; cheap bamboo dents and fades.
Carpet$3–$9 per sq ftBedrooms, stairs and upstairs rooms. Warm and quiet; plan on replacing it every 8–10 years.
Ceramic or porcelain tile$9–$25 per sq ftBathrooms, entries and hot climates. Lasts 75+ years; cold and hard underfoot, and the costliest labor.
Polished concrete (existing slab)$3–$14 per sq ftBasements, garages and modern slab homes. Grinds and seals the slab you already have.
Cost by material in TucsonTypical range, per sq ft.
Luxury vinyl plank (LVP) $4–$11per sq ft
Rigid-core vinyl plank (SPC or WPC) $5–$12per sq ft
Sheet vinyl $2–$7per sq ft
Laminate $4–$10per sq ft
Engineered hardwood $7–$19per sq ft
Solid hardwood $7–$25per sq ft
Bamboo $6–$16per sq ft
Carpet $3–$9per sq ft
Ceramic or porcelain tile $9–$25per sq ft
Polished concrete (existing slab) $3–$14per sq ft
Tucson tip: ask for the wear layer in mils, not just the brand. A 20 mil LVP costs little more than a 12 mil one inside the $4–$11 range and lasts far longer in a busy kitchen.

Box price vs. installed price — the Tucson flooring bill

Mid-grade LVP costs $3–$6 a square foot in the box and premium rigid-core plank $6–$10, but laid in Tucson the floor is $4–$11. The difference pays for a crew at $40–$95 an hour, underlayment ($0.50–$3.50 a foot where needed), transitions ($5–$30 each), 10% waste and a warranty on the work.

Click-lock LVP and laminate are fair DIY jobs on a flat, dry subfloor: the labor-only line ($2–$4 a square foot) is what you save, about $1,000–$2,000 on 500 sq ft. Leave hardwood, tile, stairs and anything over a damp slab to a pro, and never sand or scrape old vinyl tile from before the 1980s: it can hold asbestos.

What's included in a Tucson flooring quote (and what costs extra)

A standard installed price covers the flooring, underlayment where the product needs it, labor, transitions at doorways and a labor warranty. The headline price often leaves out:

  • Old floor removal and disposal — $1–$3 a square foot
  • Subfloor repair or leveling — $3–$9 a square foot where boards are soft or the slab is uneven
  • Stairs — $25–$60 a step in carpet, $55–$230 in wood or LVP
  • Baseboards, shoe molding and furniture — $4–$9 a linear foot for trim; $20–$105 a room to move furniture

Ask how long the labor warranty lasts and whether the product warranty needs a certified installer; good companies put both in writing.

What Affects Flooring Costs in Tucson

Material

Installed per square foot in Tucson: sheet vinyl $2–$7, carpet $3–$9, laminate $4–$10, LVP $4–$11, engineered hardwood $7–$19, solid hardwood $7–$25, tile $9–$25.

Room size and layout

A 12×12 bedroom in LVP is $575–$1,600; the same floor across a 1,500 sq ft home is $5,550–$16,700, a lower rate per foot. Angled walls, closets and many doorways add cuts and transitions.

Subfloor condition

Flat and dry is free; soft, uneven or damp costs money. Subfloor repair is $3–$9 a square foot, and a slab that fails a moisture test needs a vapor barrier before any wood or laminate goes down.

Old flooring removal

$1–$3 a square foot in Tucson. Carpet is quick; glued vinyl and tile take longest. Floating LVP can sometimes go over an old hard floor and skip this line.

Local rules

Arizona has an R-8 Floor Covering license for carpet, tile, wood, vinyl and similar work. The state board requires a license once labor and materials pass $1,000 or a permit is needed, which covers almost every Tucson flooring job on this page.

Labor rates in Tucson

Labor is 40–60% of an installed floor. Tucson is a mid-size market, so the 500 sq ft LVP job is about 7% below the US typical of $3,500; refinishing, which is four-fifths labor, moves the most with local wages.

Stairs and extras

Carpeting a flight of 13 stairs is $325–$780; wood or LVP treads $715–$3,000. Baseboards add $4–$9 a linear foot and furniture moving $20–$105 a room.

How to Save Money on Flooring in Tucson
  1. Check what is under the carpet.Older homes often hide solid hardwood under carpet; look before you buy. Refinishing it costs $3–$7 a square foot against $7–$25 for new wood.
  2. Buy the flooring yourself, pay for labor only.Labor to lay a floating floor you bought is $2–$4 a square foot. Big-box stores sell mid-grade LVP for $3–$6 a foot, and often run free or flat-rate basic carpet installs.
  3. Do the removal and furniture.Pulling old carpet yourself saves $1–$3 a square foot, and clearing rooms saves $20–$105 a room. Leave old vinyl tile alone unless it has been tested for asbestos.
  4. Do the whole floor at once.One 1,500 sq ft job ($5,550–$16,700 in LVP) costs less per foot than three rooms on three visits, each with its own minimum charge and transitions.
  5. Get an itemized quote.Product name and wear layer, square feet with waste, removal, subfloor repair rate, stairs, trim and warranty should each be a line. Be wary of a low per-foot price that leaves half of them out.
  6. Pick the material for the room, not the catalog.Carpet at $3–$9 a foot is fine in bedrooms; LVP at $4–$11 in kitchens and basements; save hardwood at $7–$25 for the rooms buyers see.
Flooring Cost in Tucson: What the Quote Should Include

Tucson flooring installers often quote a single number per square foot. Before you pay a deposit, get these in writing:

  • The product: brand, line, thickness and wear layer (mils) or carpet face weight
  • Square feet measured, with the waste allowance (usually 10%) shown
  • Removal and disposal of the old floor, priced or marked included
  • Subfloor repair or leveling rate per square foot, and who decides
  • Underlayment or vapor barrier and whether it is in the price
  • Stairs, transitions, baseboards and shoe molding as their own lines
  • Furniture moving and appliance disconnects
  • Warranty on labor and on the product, and the install start and finish dates
Frequently asked questions — Flooring cost in Tucson
How much does flooring cost in Tucson?

$1,850–$5,550 to install 500 sq ft of luxury vinyl plank, materials and labor, and $3,250 is typical. Per square foot: LVP $4–$11, carpet $3–$9, solid hardwood $7–$25.

How much is LVP flooring per square foot in Tucson?

$4–$11 installed, about $6 typical. Rigid-core SPC or WPC plank runs $5–$12; the plank alone is $2–$10 a foot at retail.

How much does it cost to install hardwood floors in Tucson?

$7–$25 a square foot for solid hardwood and $7–$19 for engineered, installed. A 500 sq ft room is $3,500–$12,500 in solid wood; a 2,000 sq ft home $14,950–$46,750.

How much does carpet installation cost in Tucson?

$3–$9 a square foot with pad, installed. A 12×12 bedroom is $410–$1,400, a flight of 13 stairs $325–$780, and a 3-bedroom home $4,250–$14,250.

How much does it cost to refinish hardwood floors in Tucson?

$3–$7 a square foot to sand, stain and finish, or $1,350–$3,550 for 500 sq ft. About four-fifths of that is labor, so it moves with Tucson wages more than any other line.

What does it cost to remove old flooring in Tucson?

$1–$3 a square foot, or $500–$1,500 for 500 sq ft. Carpet is the cheapest to pull; glued-down vinyl and tile the dearest. Many carpet installers include removal.

Do I need a permit to replace flooring?

Usually not. Most cities follow the model residential code, which exempts carpeting, tiling and similar finish work from permits. Replacing structural subfloor or joists can need one, so ask the installer who is pulling it.

Is LVP or laminate cheaper?

They overlap. Laminate is $4–$10 a square foot installed in Tucson and LVP $4–$11. Laminate is often cheaper to buy; LVP is waterproof, so it wins in kitchens, baths and basements.

How long does flooring installation take?

A 12×12 room in LVP, laminate or carpet is half a day to a day. A 500 sq ft open area is 1–2 days, a 1,500 sq ft home 3–5 days, and hardwood or refinishing adds drying time. Wood and plank should sit in the house a few days first.

What's included in a Tucson flooring quote?

The product, labor, underlayment where needed and transitions. Often extra: removal ($1–$3 a square foot), subfloor repair ($3–$9), stairs ($55–$230 a step in wood) and furniture moving ($20–$105 a room).

Prices verified November 2026 · Cross-referenced against 84+ American pricing sources · See methodology

Prices for the Tucson metro area, November 2026. Outer suburbs may vary.

Our methodology
These are independent estimates built from public cost guides, retailer and installer price pages, flooring-industry data and federal wage data. No flooring company can pay to change them, so always get a couple of quotes. Last reviewed November 2026. Read our full methodology →

Get a fair flooring quote in Tucson

Local flooring installers · Free quotes · No obligation, no spam.

Get quotes in Tucson →Max 2 flooring installers will contact you
Get quotes in TucsonMax 2 flooring installers · free · no spam→