Skip to content
Independent United States Cost GuidesPrices verified November 2026 · 39 trades · 195 US cities · 221+ sources For pros →
Get a fair quote

Cost guides

Plumbing & water4 trades
Electrical & energy5 trades
Renovation8 trades
Structural7 trades
Outdoor & yard7 trades
Cleaning & maintenance8 trades

More

Get a fair quote
Cost guide

How much does drywall cost in Fort Worth?

By Our research team · Last verified · Methodology

Updated November 2026Independently researched13 min read
Drywall cost

Drywall costs in Fort Worth

Fort Worth, TXChange location
Get free quotesFree · no obligation · max 2 pros
Normal range for Fort Worth, TX
$705–$1,650per room

Drywalling a 12×12 room in Fort Worth costs $705–$1,650 per room, walls and ceiling. Most homeowners here pay about $1,100. A small patch is $65–$220; water-damage repair $265–$1,750.

How we get this data
Typical
$1,100
Low end
$485
High end
$2,650
Per 12×12 room
$705–$1,650
Per sq ft (hang + finish)
$1.35–$2.90
Small hole patch
$65–$220
Water-damage repair
$265–$1,750

Want an exact price for your job?

Tell us the job. Casey checks it by text, then up to 2 local drywall contractors send you a real quote. Free, no obligation.

Get my fair quote →
Typical drywall price: Fort Worth vs nearby citiesTypical price, per room. The line marks the US typical.
Austin, TX $1,150
Fort Worth, TXThis guide $1,100
Arlington, TX $1,100
Dallas, TX $1,100
Waco, TX $1,100
Killeen, TX $1,000

The typical Fort Worth price is $1,100, 12% below the US typical of $1,250.

Where Fort Worth sits among 195 US metrosNumber of metros at each typical drywall price, per room.

Fort Worth's price band

Fort Worth is cheaper than 68% of the 195 US metros we price for drywall work.

Hanging and finishing drywall costs $1.35–$2.90 per sq ft in Fort Worth, or $45–$90 a sheet. A small hole patch is $65–$220, a large one $130–$395, and water-damage repair $265–$1,750. Skim-coating a room's walls smooth runs $350–$705.

Dallas–Fort Worth drywall installation runs below the US average: Angi's 2026 Dallas figure is $1,803 on average ($798–$2,849), or $1.85–$2.45 per sq ft with materials. Texas has no state license for drywall or general contractors (the state licensing agency's list covers electricians, air-conditioning and mold remediators, not drywall), so insurance, references and a written scope are your only protection; ask that the quote name the finish level.

Prices on this page include labor and materials to a paint-ready finish unless the row says otherwise; paint and primer are extra. Many Fort Worth companies charge a $110–$175 minimum for a single small patch.

Comparing cities, or after the US-wide picture? See the national guide: Drywall cost in the USA.

Quick answer

$705–$1,650 to hang and finish drywall in one 12×12 room in Fort Worth, labor and materials — typically $1,100. That's $1.35–$2.90 per sq ft or $45–$90 a sheet; a small hole patch is $65–$220 and water-damage repair $265–$1,750. Verified November 2026. Get free Fort Worth quotes →

  • One 12×12 room hung and finished: $705–$1,650 ($1,100 typical)
  • Per sq ft $1.35–$2.90; per sheet $45–$90
  • Small hole $65–$220; large hole $130–$395; water damage $265–$1,750
  • Skim coat $0.90–$2.65 per sq ft; popcorn removal $130–$395 per 100 sq ft
  • Priciest area to work in: Downtown & Near Southside; lowest quotes: Arlington & the Mid-Cities

Prices verified November 2026 · Cross-referenced against 83+ American pricing sources · See methodology

Detailed pricing — Drywall cost in Fort Worth 2026

Installed prices include labor and materials to a paint-ready finish; repairs are per job including the visit. Fort Worth metro, re-verified November 2026.

ServiceLowTypicalHigh
Hang and finish drywall, one 12×12 room (walls and ceiling, about 500 sq ft)per room$705per room$1,100$1,650
Drywall contractor hourly rate/hr$40/hr$60$90
Hang and finish, standard Level 4 finish, per 100 sq ft (labor and materials)per 100 sq ft$135per 100 sq ft$205$290
Level 5 smooth finish on new drywall, per 100 sq ftper 100 sq ft$160per 100 sq ft$250$315
One 4×8 sheet of 1/2-inch drywall, hung and finishedper sheet$45per sheet$65$90
Small hole or dent repair (under 4 in.), one visitper job$65per job$130$220
Large hole repair (6–12 in., new piece let in and finished)per job$130per job$240$395
Cracks, nail pops and seam repairper job$90per job$175$350
Water-damaged drywall: cut out, replace and finishper job$265per job$795$1,750
Ceiling drywall repair (sag, stain or hole)per job$220per job$530$1,050
Replace a 12×12 room ceiling: tear out, new drywall, finishedper room$445per room$805$1,350
Skim coat existing walls to a smooth finish, per 100 sq ftper 100 sq ft$90per 100 sq ft$115$265
Skim coat one 12×12 room, walls onlyper room$350per room$485$705
Wall texture (orange peel, knockdown, skip trowel), per 100 sq ftper 100 sq ft$70per 100 sq ft$115$180
Popcorn ceiling removal and re-skim (no asbestos), per 100 sq ftper 100 sq ft$130per 100 sq ft$220$395
Corner bead repair or replacement (one damaged outside corner)per corner$65per corner$130$265
New partition wall, framed and drywalled both sides (8 ft high), per linear ftper linear ft$25per linear ft$40$70
Soundproof drywall (QuietRock or double 5/8-inch layer), per 100 sq ft installedper 100 sq ft$325per 100 sq ft$485$695
Moisture- and mold-resistant drywall (green or purple board), per 100 sq ft installedper 100 sq ft$160per 100 sq ft$225$315
Drywall a 2-car garage, walls and ceiling (5/8-inch fire-rated where code requires)per garage$1,100per garage$2,000$3,450
Drywall a whole 2,000 sq ft house (about 7,000 sq ft of board), hung and finishedper house$8,150per house$13,550$25,350
Remove and dispose of old drywall, per 100 sq ftper 100 sq ft$45per 100 sq ft$90$180
Plaster wall or ceiling repair (cracks, holes, loose plaster)per job$130per job$350$1,050
Drywall crew day rate (two people, materials extra)per day$615per day$970$1,400
drywall jobs in Fort Worth: what they costPer 100 sq ft, low to high with the typical price marked. Every line is in the table above.
Soundproof drywall (QuietRock or double 5/8-inch layer), per 100 sq ft installed $485$325–$695
Level 5 smooth finish on new drywall, per 100 sq ft $250$160–$315
Moisture- and mold-resistant drywall (green or purple board), per 100 sq ft installed $225$160–$315
Popcorn ceiling removal and re-skim (no asbestos), per 100 sq ft $220$130–$395
Hang and finish, standard Level 4 finish, per 100 sq ft (labor and materials) $205$135–$290
Skim coat existing walls to a smooth finish, per 100 sq ft $115$90–$265
Wall texture (orange peel, knockdown, skip trowel), per 100 sq ft $115$70–$180
Remove and dispose of old drywall, per 100 sq ft $90$45–$180
Already got a quote?
Check it against these Fort Worth prices — free, no sign-up.
$

Got it as a PDF or photo? Upload up to 3 quotes and compare →

Free quotes

Get free quotes from up to 2 local drywall contractors in Fort Worth

Free · No obligation · About a minute

  1. 1The job
  2. 2Budget
  3. 3Your details
Casey · LocalGoingRate

What do you need a price on?

Tap one to start.

Prices verified November 2026 · Cross-referenced against 83+ American pricing sources · See methodology

Prices cover the Fort Worth metro. Outlying towns can run 5–10% lower; older homes in Downtown & Near Southside sit at the top of each range.

How drywall costs vary across Fort Worth

Drywall prices across Fort Worth

Where you live in the metro changes the labor, not the board. Older homes in Downtown & Near Southside take the longest; jobs in Arlington & the Mid-Cities tend to come in at or under the city typical.

Drywall prices across Fort WorthTypical range by part of the metro, per room. The line marks the Fort Worth typical.
Downtown & Near Southside8–12% above the city average $760–$1,850per room
Stop Six & East Fort WorthStandard to 6% above $725–$1,750per room
Westside & Cultural DistrictStandard pricing $705–$1,650per room
Arlington & the Mid-CitiesStandard; bigger rooms common $705–$1,700per room

Downtown & Near Southside

8–12% above the city average
Downtown, Near Southside, Magnolia Ave
Per 12×12 room
$760–$1,850 per room
Typical repair
$140–$440 / large hole patch

Apartments, condos and older houses. Expect a higher minimum charge, and ask whether the price covers protecting floors and hauling debris down.

Stop Six & East Fort Worth

Standard to 6% above
Stop Six, Polytechnic, Riverside
Per 12×12 room
$725–$1,750 per room
Typical repair
$135–$420 / large hole patch

Renovated older homes next to new builds. Standard rates for new drywall; repairs in the older stock often turn into skim coats.

Westside & Cultural District

Standard pricing
Cultural District, Westover Hills, Ridglea
Per 12×12 room
$705–$1,650 per room
Typical repair
$130–$395 / large hole patch

Standard pricing for standard jobs. Driveway parking and easy access keep visits short.

Arlington & the Mid-Cities

Standard; bigger rooms common
Arlington, Hurst, Bedford, Euless
Per 12×12 room
$705–$1,700 per room
Typical repair
$130–$405 / large hole patch

Bigger homes with more wall to cover: a two-car garage, a bonus room or an addition is a common job here, and high ceilings add 10% or more.

What you'll actually pay — job by job

Real-World Drywall Costs in Fort Worth

Here's what common drywall jobs cost in Fort Worth in 2026, labor and materials to a paint-ready finish.

Doorknob hole in a bedroom wall — 1 visit, 1–2 hours

$65–$220

Cut a clean square, screw in a backer, let in a patch, tape and mud in two or three coats, sand. Most Fort Worth companies charge their $110–$175 minimum for a single patch, so add other holes to the same visit.

Ceiling stain and sag after a bathroom leak

$485–$2,800

Water-damaged board cut out and replaced ($265–$1,750) plus the ceiling repair and texture match ($220–$1,050). Fix the leak first; the drywall company won't warranty a patch under a live drip.

Drywall one 12×12 room (garage conversion, addition or basement) — 2–4 days

$705–$1,650

Walls and ceiling hung and finished to Level 4 for $1,100 typical, about 15 sheets. Moisture-resistant board for a bathroom or basement adds about $20 per 100 sq ft; paint is separate.

Scrape a popcorn ceiling in a living room (about 300 sq ft)

$390–$1,185

Scrape, skim smooth and prime at $130–$395 per 100 sq ft. In a home built before 1980, a lab test ($30–$75) comes first; if it's positive, abatement is a different trade at a much higher price.

Skim coat a textured bedroom smooth

$350–$705

Two thin coats of compound over the walls of a 12×12 room, sanded to Level 5, at $0.90–$2.65 per sq ft. The ceiling adds $100–$150 per 100 sq ft, and new paint is a must afterwards.

How much does drywall cost in Fort Worth?

Drywalling a 12×12 room in Fort Worth costs $705 to $1,650. The middle of the market, about $1,100, covers about 15 sheets of 1/2-inch board hung, taped, mudded and sanded to a Level 4 finish, with corner bead and cleanup. Painting is separate.

Old texture costs extra to deal with: $130–$395 per 100 sq ft to scrape and re-skim a popcorn ceiling, plus an asbestos test ($30–$75 by mail) in any home built before 1980. Re-checked against 83 sources in November 2026.

Drywall prices in Fort Worth (2026): new board, repairs and finishes

Hang and finish costs $1.35–$2.90 per sq ft in Fort Worth, a small hole patch $65–$220, and a skim coat $0.90–$2.65 per sq ft.

Line on the quoteLowTypicalHigh
Hang and finish, standard Level 4 finish, per 100 sq ft (labor and materials)$135$205$290
One 4×8 sheet of 1/2-inch drywall, hung and finished$45$65$90
Small hole or dent repair (under 4 in.), one visit$65$130$220
Large hole repair (6–12 in., new piece let in and finished)$130$240$395
Water-damaged drywall: cut out, replace and finish$265$795$1,750
Replace a 12×12 room ceiling: tear out, new drywall, finished$445$805$1,350
Skim coat existing walls to a smooth finish, per 100 sq ft$90$115$265
Popcorn ceiling removal and re-skim (no asbestos), per 100 sq ft$130$220$395

Repair or replace in Fort Worth: a wall with a few holes is a $130–$395 patch job; a wall with old texture or dozens of nail pops is a $0.90–$2.65 per sq ft skim coat; only a wall that is crumbling, moldy or wet through needs new board at $1.35–$2.90 per sq ft.

What moves a drywall quote in Fort Worth:

  • Finish level — Level 4 for painted walls is $1.35–$2.90 per sq ft; a Level 5 smooth finish $1.60–$3.15.
  • Ceilings and height — ceiling board is slower to hang; rooms over 8–10 ft add about 10–30%.
  • Board type — moisture-resistant board is $160–$315 per 100 sq ft installed; soundproof $325–$695.
  • Texture — matching orange peel or knockdown adds $70–$180 per 100 sq ft; scraping popcorn $130–$395.
  • Minimum charge — a single small patch costs $65–$220 because most companies charge a $110–$175 minimum visit.

Ask every Fort Worth company for the same five things: the finish level by number, whether primer is included, who hauls the debris, how texture will be matched, and the minimum charge. Compare those, not the headline price. Get a quote for your drywall job →

Drywall Cost in Fort Worth by Room and Project Size

Quick answer

One 12×12 room: $705–$1,650. Two-car garage, walls and ceiling: $1,100–$3,450. Whole 2,000 sq ft house: $8,150–$25,350. Per sheet: $45–$90 hung and finished.

Worked example: a Fort Worth living room of about 300 sq ft of wall with a popcorn ceiling. Scraping and re-skimming the ceiling at $220 per 100 sq ft is about $660, and skim-coating the walls smooth at $115 per 100 sq ft about $345, so roughly $1,005 before paint. A lab test for asbestos ($30–$75) comes first in a home built before 1980.

Whole-house math: a 2,000 sq ft house has about 7,000 sq ft of wall and ceiling. At $1.35–$2.90 per sq ft that is $8,150–$25,350 hung and finished, which is why a gut remodel's drywall line is one of its biggest. Booking the drywall and paint crews back to back saves a second round of floor protection and cleanup.

Fort Worth Drywall Costs by Board and Finish Type

Board or finish typeCostBest for
Standard 1/2-inch drywall$135–$290 per 100 sq ftWalls in living rooms, bedrooms and hallways. The sheet itself is $10–$20; most of the price is hanging and finishing.
5/8-inch Type X fire-rated$13–$30 per sheet (board only)Required on a garage ceiling under living space; common on the garage wall shared with the house (the code minimum there is 1/2-inch) and in furnace rooms. Heavier and stiffer, so it also resists sag on ceilings.
Moisture- and mold-resistant (green or purple board)$160–$315 per 100 sq ft installedBathrooms, laundry rooms, basements and garages. Not a tile backer inside a shower; that needs cement board.
Soundproof (QuietRock or double layer)$325–$695 per 100 sq ft installedBedroom walls next to a living room, home offices, shared walls in a duplex. The sheet alone is $30–$100.
Lightweight 1/2-inch (UltraLight)$135–$290 per 100 sq ftCeilings and DIY jobs: lighter than regular 1/2-inch board at the same price, so it is easier to lift overhead.
Level 5 smooth finish$160–$315 per 100 sq ftWalls that get glossy paint, dark colors or raking light from big windows. A thin skim coat over the whole sheet hides every joint.
Skim coat over existing walls$90–$265 per 100 sq ftSmoothing textured or damaged walls without tearing them out. Cheaper than new drywall when the old board is sound.
Plaster (repair or veneer)$130–$1,050 per repairPre-1950 homes with plaster-and-lath walls. Patching plaster costs more per square foot than drywall; replacing it with drywall is a bigger job.
Cost by board or finish type in Fort WorthTypical range, per 100 sq ft.
Standard 1/2-inch drywall $135–$290per 100 sq ft
Lightweight 1/2-inch (UltraLight) $135–$290per 100 sq ft
Level 5 smooth finish $160–$315per 100 sq ft
Skim coat over existing walls $90–$265per 100 sq ft
Fort Worth tip: if the wall between your garage and house is bare studs or thin paneling, drywalling it is a code item, not a cosmetic one: 1/2-inch board on the wall, 5/8-inch fire-rated ($13–$30 a sheet) on a ceiling under living space. The whole garage runs $1,100–$3,450.

Board price vs. what you pay — the Fort Worth drywall bill

A 4×8 sheet of 1/2-inch drywall costs $10–$20 at the store, and all the materials for a 12×12 room run $200–$400, but the room hung and finished in Fort Worth is $705–$1,650. The difference pays for a hanger, a finisher who comes back two or three times as coats dry, sanding, cleanup and a warranty on cracks.

Hanging board is the easy half and the one DIYers can do; a $40-a-day lift rental makes ceilings possible. Taping and finishing is the skilled half: a poor Level 4 job shows every joint once the paint goes on. If you do anything yourself, hang it and hire the finish at about $0.50–$1.50 per sq ft.

What's included in a Fort Worth drywall quote (and what costs extra)

A standard installed price covers the board, screws, tape, corner bead and joint compound, hanging, taping, three coats of mud, sanding to the finish level named, and a sweep-out. The headline price often leaves out:

  • Primer and paint — a separate trade in most Fort Worth quotes; even a bare-minimum coat of primer is extra unless listed
  • Debris haul-away — $300–$500 to dispose of old drywall from a room, or $45–$180 per 100 sq ft to tear out and remove
  • Texture — $70–$180 per 100 sq ft to apply or match; a Level 5 skim is $1.60–$3.15 per sq ft
  • Asbestos or lead testing — $30–$75 for a mail-in texture sample, $250–$850 for a professional survey, in homes built before 1980

Ask how long the company warranties cracks and nail pops; good finishers put a year in writing.

What Affects Drywall Costs in Fort Worth

Finish level

Level 4, the standard for painted walls, is $1.35–$2.90 per sq ft in Fort Worth; Level 5, a full skim coat for glossy paint or strong light, is $1.60–$3.15. Level 3 is only for heavy texture. Get the level written on the quote.

Ceilings, height and access

Ceiling board is heavier to hang and slower to finish; a 12×12 ceiling replaced runs $445–$1,350. Rooms over 8–10 ft add about 10–30%, and stairwells need scaffolding.

Repair size and count

A small hole is $65–$220, a large one $130–$395, cracks and nail pops $90–$350. Several small repairs on one visit cost far less than three separate calls at the $110–$175 minimum.

Water damage and mold

Cutting out wet board and replacing it is $265–$1,750. If mold has set in behind the wall, remediation is a separate trade at $1,500–$3,000 per 100 sq ft, and the leak has to be fixed first.

Local rules

Texas has no state license for drywall contractors, so a Fort Worth quote stands on the company's insurance and references. A permit is usually not needed to repair or replace existing drywall, but the wall between a garage and the house must be covered with gypsum board under the building code (5/8-inch fire-rated on a ceiling under living space), and that work is inspected.

Labor rates in Fort Worth

Labor is about 70% of the bill. Fort Worth is a mid-size market; a room of drywall here is about 12% below the US typical of $1,250. Drywall contractors here charge about $40–$90 an hour, with a $110–$175 minimum for small repairs.

Texture and old finishes

Matching texture adds $70–$180 per 100 sq ft; scraping popcorn $130–$395. Plaster walls in older Fort Worth homes cost more to patch ($130–$1,050) than drywall, and a full skim coat over them is $0.90–$2.65 per sq ft.

How to Save Money on Drywall in Fort Worth
  1. Bundle the small repairs.Most Fort Worth companies charge a $110–$175 minimum. One visit for five holes costs about the same as one visit for one hole.
  2. Specify Level 4, not Level 5.Level 4 ($1.35–$2.90 per sq ft) is right for flat and eggshell paint. Pay for Level 5 ($1.60–$3.15) only where glossy paint or raking light will show joints.
  3. Skim instead of replacing.Sound walls with ugly texture or lots of nail pops can be skim-coated for $0.90–$2.65 per sq ft, about half the price of new board, and with no demolition dust.
  4. Hang it yourself, hire the finish.Materials for a 12×12 room are $200–$400 and a lift rents for about $40 a day. Then pay a finisher about $0.50–$1.50 per sq ft for the part that shows.
  5. Fix the leak before the drywall.A $265–$1,750 water-damage repair under a live leak will be back in a month. Plumber or roofer first, drywall second, and keep the repair receipts for insurance.
  6. Get the finish level and extras in writing.Primer, texture matching, debris haul-away and moving furniture are the usual add-ons. A quote that lists them is cheaper to compare and harder to pad later.
Drywall Cost in Fort Worth: What the Quote Should Include

Fort Worth drywall companies often quote by the sheet or the square foot over the phone. Before you agree to the work, get these in writing:

  • The finish level by number (Level 4 for paint; Level 5 for smooth or glossy walls)
  • Board type and thickness for each room: 1/2-inch, 5/8-inch fire-rated, moisture-resistant, soundproof
  • Square footage or sheet count the price is based on
  • Whether primer is included, and who paints
  • Texture: match existing, apply new, or leave smooth
  • Demolition, debris haul-away and floor protection
  • Minimum charge and the number of visits (hanging, coats, sanding)
  • Warranty on cracks, nail pops and seams
Frequently asked questions — Drywall cost in Fort Worth
How much does drywall cost in Fort Worth?

$705–$1,650 to hang and finish one 12×12 room, labor and materials, and $1,100 is typical. That's $1.35–$2.90 per sq ft, or $45–$90 a sheet.

How much does drywall repair cost in Fort Worth?

$65–$220 for a small hole, $130–$395 for a large one, $90–$350 for cracks and nail pops, and $265–$1,750 for water damage. Most companies charge a $110–$175 minimum per visit.

What does drywall cost per square foot in Fort Worth?

$1.35–$2.90 per sq ft hung and finished to Level 4, labor and materials. Level 5 smooth is $1.60–$3.15; skim-coating existing walls $0.90–$2.65.

How much does it cost to fix a ceiling in Fort Worth?

$220–$1,050 for a sag, stain or hole, and $445–$1,350 to tear out and replace a whole 12×12 room ceiling. Water damage with the repair runs $485–$2,800.

Can I hang drywall myself?

Hanging, yes: materials for a room are $200–$400 and a lift rents for about $40 a day. Finishing is the skilled part; most DIYers hire it out at about $0.50–$1.50 per sq ft.

How much does it cost to remove a popcorn ceiling in Fort Worth?

$130–$395 per 100 sq ft to scrape, skim and prime an asbestos-free ceiling. Test first in any home built before 1980 ($30–$75 by mail); asbestos abatement costs far more.

How much is a skim coat in Fort Worth?

$0.90–$2.65 per sq ft, or $350–$705 for the walls of a 12×12 room. It smooths texture and small damage without new board, but the room must be repainted after.

Do I need a permit for drywall?

Texas has no state license for drywall contractors, so a Fort Worth quote stands on the company's insurance and references. A permit is usually not needed to repair or replace existing drywall, but the wall between a garage and the house must be covered with gypsum board under the building code (5/8-inch fire-rated on a ceiling under living space), and that work is inspected.

How much does it cost to drywall a garage or a whole house in Fort Worth?

$1,100–$3,450 for a two-car garage, walls and ceiling, with fire-rated board where the code requires it. A whole 2,000 sq ft house is $8,150–$25,350 hung and finished.

What's included in a Fort Worth drywall quote?

Board, tape, mud, hanging, finishing to the level named, and cleanup. Often extra: primer and paint, debris haul-away ($300–$500), texture ($70–$180 per 100 sq ft) and asbestos testing in older homes.

Prices verified November 2026 · Cross-referenced against 83+ American pricing sources · See methodology

Prices for the Fort Worth metro area, November 2026. Outer suburbs may vary.

Our methodology
These are independent estimates built from public cost guides, dated city price pages, contractor and retailer price lists, federal producer-price and wage data. No drywall company can pay to change them, so always get a couple of quotes. Last reviewed November 2026. Read our full methodology →

Get a fair drywall quote in Fort Worth

Local drywall contractors · Free quotes · No obligation, no spam.

Get quotes in Fort Worth →Max 2 drywall contractors will contact you
Get quotes in Fort WorthMax 2 drywall contractors · free · no spam→