How much does tile installation cost in Asheville?
By Our research team · Last verified · Methodology
Tiling a 100 sq ft bathroom floor in Asheville costs $955–$2,400 with $1,500 typical — about $15 a square foot with standard tile. A tiled shower runs $1,400–$4,750; a kitchen backsplash $475–$1,350.
How we get this data- Typical
- $1,500
- Low end
- $475
- High end
- $4,750
Want an exact price for your job?
Tell us the job. Casey checks it by text, then up to 2 local tile setters send you a real quote. Free, no obligation.
Get my fair quote →The typical Asheville price is $1,500, 6% below the US typical of $1,600.
Asheville's price band
Asheville is cheaper than 60% of the 195 US metros we price for tile installation work.
Installing floor tile on a 100 sq ft bathroom floor in Asheville costs $955–$2,400 with standard ceramic or porcelain, and $1,500 is typical — about $15 per square foot for tile, setting materials and labor. Labor alone runs $5–$13 per sq ft, and the other common jobs are priced by the job: $1,400–$4,750 to tile a shower and $475–$1,350 for a kitchen backsplash.
Asheville is a smaller market. Pay for tile and stone setters in the Asheville metro runs about 12% below the US median, and labor is about 60% of an installed tile job, since tile, thinset and grout cost much the same everywhere. So prices here land below the US typical of $1,600.
Most states don't license tile setters as a separate trade, and a floor or backsplash job rarely needs a permit. A shower rebuild that moves plumbing or replaces the pan often does — check your city's building department. This is general information, not legal advice.
Comparing cities, or after the US-wide picture? See the national guide: Tile installation cost in the USA.
$955–$2,400 to tile a 100 sq ft bathroom floor in Asheville with standard ceramic or porcelain — typically $1,500 — about $15 per square foot installed. A tiled shower runs $1,400–$4,750. Verified November 2026. Get free Asheville quotes →
- 100 sq ft bathroom floor, standard tile: $955–$2,400 ($1,500 typical)
- Installed $10–$24 per sq ft; labor only $5–$13 per sq ft
- Tile a shower $1,400–$4,750; kitchen backsplash $475–$1,350
- Tile removal $2–$7 per sq ft; waterproofing $3–$8 per sq ft
- Hourly rate $40–$100; minimum charge $320–$690
Prices verified November 2026 · Cross-referenced against 77+ American pricing sources · See methodology
Labor and setting materials included unless the row says otherwise; tile supply rows are the tile alone. Asheville metro, re-verified November 2026. Demolition, leveling and waterproofing are separate lines.
| Service | Low | Typical | High |
|---|---|---|---|
| Floor tile, 100 sq ft bathroom floor — standard ceramic or porcelain (tile + labor)per 100 sq ft | $955per 100 sq ft | $1,500 | $2,400 |
| Floor tile installed, standard ceramic or porcelain (tile + labor)per sq ft | $10per sq ft | $15 | $24 |
| Floor tile installation, standard 12×12 to 12×24 (labor only)per sq ft | $5per sq ft | $8 | $13 |
| Large-format floor tile, 24×24 and bigger (labor only)per sq ft | $8per sq ft | $11 | $15 |
| Wall tile, standard (labor only)per sq ft | $7per sq ft | $11 | $18 |
| Mosaic or feature tile (labor only)per sq ft | $11per sq ft | $17 | $28 |
| Natural stone tile — marble, travertine, limestone (labor only)per sq ft | $9per sq ft | $14 | $20 |
| Outdoor or patio tile, porcelain pavers on a slab (labor only)per sq ft | $6per sq ft | $11 | $18 |
| Full bathroom, 60 sq ft floor + 140 sq ft walls (labor only)per bathroom | $1,300per bathroom | $2,000 | $3,300 |
| Tile removal and disposalper sq ft | $2per sq ft | $4 | $7 |
| Waterproofing membrane, showers and wet areas (installed)per sq ft | $3per sq ft | $5 | $8 |
| Floor leveling and prep (self-leveling underlayment)per sq ft | $2per sq ft | $3 | $6 |
| Tile setter hourly rateper hour | $40per hour | $70 | $100 |
| Tile setter day rate (8 hours)per day | $320per day | $560 | $800 |
| Tile supply, budget ceramicper sq ft | $1per sq ft | $2 | $4 |
| Tile supply, mid-range porcelainper sq ft | $3per sq ft | $5 | $9 |
| Tile supply, large-format porcelain (24×24, 24×48)per sq ft | $2per sq ft | $5 | $12 |
| Tile supply, outdoor slip-resistant porcelain paversper sq ft | $4per sq ft | $8 | $15 |
| Tile supply, mosaic sheets (ceramic, porcelain, glass, stone)per sq ft | $4per sq ft | $10 | $30 |
| Tile supply, subway or backsplash ceramicper sq ft | $2per sq ft | $4 | $10 |
| Tile supply, premium natural stone (marble, travertine, limestone)per sq ft | $6per sq ft | $12 | $25 |
| Bathroom tile, 60 sq ft floor + 140 sq ft walls, mid-range porcelain (tile + labor)per bathroom | $2,100per bathroom | $3,400 | $5,700 |
| Tile a shower, walls and floor, about 100 sq ft (tile + labor)per shower | $1,400per shower | $2,550 | $4,750 |
| Kitchen backsplash, about 30 sq ft, subway tile (tile + labor)per job | $475per job | $855 | $1,350 |
Got it as a PDF or photo? Upload up to 3 quotes and compare →
Get free quotes from up to 2 local tile setters in Asheville
Free · No obligation · About a minute
- 1The job
- 2Budget
- 3Your details
What do you want tiled?
Tap one to start.
What's your rough budget?
A ballpark is fine. It helps the tile setters who reply.
Where should they text you?
- Max 2 tile setters. No call floods.
- 100% free. No obligation.
- 🔒 Only your matched tile setters see your number.
By continuing you agree to our Terms and Privacy Policy, and to texts from LocalGoingRate and up to 2 tile setters about this request.Msg & data rates may apply · frequency varies · STOP to end · HELP for help
Check your phone
Prices verified November 2026 · Cross-referenced against 77+ American pricing sources · See methodology
Prices cover the Asheville metro — the city and its close suburbs. Far-out towns can add a trip fee; Downtown & the River Arts District jobs often run higher for parking, stairs and building rules.
Tile installation prices across Asheville
Same trade, four price bands. Rates run highest in Downtown & the River Arts District, older housing in West Asheville brings more prep work, and Hendersonville, Black Mountain & Weaverville is usually the cheapest place to book.
Downtown & the River Arts District
- Floor tile, 100 sq ft
- $1,200–$2,150 per 100 sq ft
- Tiled shower
- $2,150–$4,000 / tiled shower
Apartments and condos where access is the cost: elevators to book, nowhere to cut tile, and debris that has to be bagged and carried out. Simple floors price normally; showers and bathrooms run at the top of the range.
West Asheville
- Floor tile, 100 sq ft
- $1,150–$2,050 per 100 sq ft
- Tiled shower
- $2,050–$3,800 / tiled shower
Lots of fix-and-flip and whole-bathroom work. Quotes vary widely here, so get two, and make sure both include demolition and waterproofing.
East & North Asheville
- Floor tile, 100 sq ft
- $1,100–$1,950 per 100 sq ft
- Tiled shower
- $2,000–$3,650 / tiled shower
Established streets with a mix of house ages. Most jobs price at the city average; older homes may need extra time for leveling and backer board.
Hendersonville, Black Mountain & Weaverville
- Floor tile, 100 sq ft
- $1,100–$1,900 per 100 sq ft
- Tiled shower
- $1,950–$3,600 / tiled shower
Mostly single-family homes with bigger bathrooms and open kitchens. Large-format floors and full shower rebuilds are common, and some setters add a trip fee for distance.
Real-world tile installation costs in Asheville
Here's what common tile installation jobs cost in Asheville in 2026, standard tile, setting materials and labor included.
Small bathroom floor, 40 sq ft of porcelain
At $10–$24 per sq ft installed, 40 square feet works out to $400–$960, and most Asheville setters charge a minimum of $320–$690 whatever the size — so budget $400–$960. Pulling the toilet and resetting it is usually included; a new wax ring and supply line are small extras.
Tile a shower, walls and floor, with waterproofing
A full tiled shower in Asheville — about 100 square feet of wall and floor tile over a waterproof membrane — runs $1,400–$4,750. A recessed niche or bench adds $185–$465, for $1,600–$5,200 in all. If the shower valve or drain moves, a plumber's permit and bill are extra.
Kitchen backsplash, about 30 sq ft of subway tile
Expect $475–$1,350 for a standard backsplash between the counter and the upper cabinets. The tile itself is only $2–$10 per sq ft; the price is the cutting around outlets and windows. Removing an old tile backsplash first adds $2–$7 per sq ft.
Replace a kitchen floor: tear out 150 sq ft of old tile, level, lay porcelain
Removal and disposal at $4 a square foot ($300–$1,050), leveling the floor at $3 a foot and new porcelain at $15 a foot installed ($1,500–$3,600) comes to about $3,300 in Asheville. Expect two to three days and a lot of dust — ask about dust-free removal ($4–$7 per sq ft).
Full bathroom, floor and walls, with a heated floor
Tiling a 60 sq ft floor and 140 sq ft of walls in mid-range porcelain is $2,100–$5,700. An electric heating mat under the floor adds $12 a square foot plus $135–$335 for the thermostat, about $840 for a 50 sq ft bathroom, for $2,700–$7,200 in all. The mat needs its own circuit, so an electrician's visit is extra.
How much does tile installation cost in Asheville?
Between $955 and $2,400 for a 100 sq ft bathroom floor, with most Asheville homeowners paying about $1,500. Labor is the bigger half: a setter charges $5–$13 per sq ft to lay standard tile, $8–$15 per sq ft for large-format and $9–$20 per sq ft for natural stone. Standard porcelain itself is only $3–$9 per sq ft.
For big floors, ask for a per-foot price. Asheville setters charge about $10–$24 per sq ft installed for standard porcelain and $12–$29 per sq ft for large-format, so a 300 sq ft living area runs $3,600–$8,700, based on 77 sources checked in November 2026.
Lines on a tile quote in Asheville (2026)
A 100 sq ft bathroom floor runs $955–$2,400, labor alone $5–$13 per sq ft, and most setters charge a $320–$690 minimum on small jobs.
| Line on the quote | Low | Typical | High |
|---|---|---|---|
| Floor tile, 100 sq ft bathroom floor (tile + labor) | $955 | $1,500 | $2,400 |
| Floor tile installed, per sq ft (tile + labor) | $10 | $15 | $24 |
| Floor tile labor only, per sq ft | $5 | $8 | $13 |
| Tile setter hourly rate | $40 | $70 | $100 |
| Minimum charge on small jobs | $320 | $460 | $690 |
| Tile removal and disposal, per sq ft | $2 | $4 | $7 |
| Waterproofing membrane, per sq ft | $3 | $5 | $8 |
| Floor leveling and prep, per sq ft | $2 | $3 | $6 |
Per-foot price vs the bill in Asheville: $15 a square foot sounds simple, but demolition ($4), leveling ($3) and waterproofing ($5) can add $12 a foot in a wet room. Get those lines in writing.
What moves a tile quote in Asheville:
- The tile — budget ceramic is $1–$4 per sq ft, mid-range porcelain $3–$9 per sq ft, natural stone $6–$25 per sq ft, and stone costs more to set too.
- Tile size and pattern — large-format runs $8–$15 per sq ft in labor against $5–$13 per sq ft for standard sizes; herringbone, diagonal or mosaic adds 10–30% in time and waste.
- Prep — tearing out old tile ($2–$7 per sq ft), leveling ($2–$6 per sq ft) and backer board ($5–$8 per sq ft) are separate lines, and they decide whether the job lasts.
- Wet areas — showers need a waterproof membrane ($3–$8 per sq ft) and a sloped pan ($760–$2,850 tiled), which is why a shower costs $1,400–$4,750.
- Minimums and access — most setters charge a $320–$690 minimum; stairs, elevators and no place to set up a wet saw add time in Downtown & the River Arts District.
Ask every Asheville tile setter the same four things: the per-foot or flat price, what prep and waterproofing are included, who buys the tile and setting materials, and whether they carry liability insurance. Get a quote for your tile job →
Tile installation cost in Asheville by room size
A 40 sq ft bathroom floor is $400–$960 (the minimum charge sets it), a 100 sq ft bathroom floor $955–$2,400, a 150 sq ft kitchen floor $1,500–$3,600 and a 300 sq ft living area in large-format porcelain $3,600–$8,700.
Worked example: a kitchen floor in Asheville. 150 square feet of standard porcelain at $15 a foot installed is about $2,250. Add tear-out of the old tile at $4 a foot ($600) and leveling at $3 a foot, and the job comes to about $3,300.
A whole house of tile floors — 1,500 square feet of porcelain — runs about $13,500–$32,400 in Asheville with a 10% volume discount, while a 200 sq ft porcelain-paver patio over a slab is $2,400–$7,000.
Tile types and what each costs installed in Asheville
| Tile type | Cost | Best for |
|---|---|---|
| Ceramic tile (basic glazed) | $8–$19 per sq ft installed | Bathroom floors and walls on a budget; easy to cut, the cheapest tile to buy and to lay |
| Porcelain tile (standard 12×12 or 12×24) | $10–$24 per sq ft installed | Kitchens, bathrooms and entries — denser and harder than ceramic, so it takes wear and water without sealing |
| Large-format porcelain (24×24, 24×48) | $12–$29 per sq ft installed | Open living areas and big showers; fewer grout lines, but the floor must be flat and the labor rate is higher |
| Natural stone (marble, travertine, limestone) | $17–$45 per sq ft installed | Statement floors and shower walls; needs sealing and a setter who works stone every week |
| Mosaic and feature tile | $17–$60 per sq ft installed | Shower floors, niches and accent strips — small pieces, slow to set, so labor per foot is the highest |
| Subway tile (ceramic backsplash and wall tile) | $11–$30 per sq ft installed | Kitchen backsplashes and tub surrounds; cheap tile, moderate labor |
| Outdoor slip-resistant porcelain pavers | $12–$35 per sq ft installed | Patios and pool decks over a concrete slab; frost-proof and textured for wet feet |
| Heated floor add-on (electric mat under the tile) | $8–$19 per sq ft added | Bathroom floors in cold climates — add $135–$335 for the thermostat hookup |
Per-square-foot rate vs what you actually pay — the Asheville tile bill
A $15-a-foot price rarely shows up as $15 a foot on the invoice. Most Asheville setters charge a $320–$690 minimum, so a 20 sq ft powder room floor costs the minimum, not $300. Below about 50 square feet, ask for a flat price and pair the job with something else.
Above that, the per-foot rate works, but the prep lines decide the total: demolition at $2–$7 per sq ft, leveling at $2–$6 per sq ft, backer board at $5–$8 per sq ft and, in a shower, waterproofing at $3–$8 per sq ft. Compare quotes line by line — tile, labor, prep, waterproofing, trim, haul-away — not the headline rate.
What's included in a tile quote in Asheville (and what costs extra)
A standard tile quote covers layout, setting the tile in thinset, grouting, cleanup and hauling away the scraps. Often left out:
- The tile itself — $1–$4 per sq ft for budget ceramic to $6–$25 per sq ft for natural stone, plus 10–15% overage
- Demolition and disposal — $2–$7 per sq ft, plus a $195–$780 dumpster on bigger tear-outs
- Prep — leveling $2–$6 per sq ft, backer board $5–$8 per sq ft, waterproofing $3–$8 per sq ft
- Trim and transitions — bullnose, metal edge profiles, a marble threshold ($29–$75), and the plumber or electrician if a toilet, vanity, valve or heating mat is involved
Ask for the price in writing before work starts, and for proof of liability insurance.
Local wages
Federal data put the median pay for tile and stone setters in the Asheville metro at $49,190 a year, about 12% below the US median of $55,690. Labor is about 60% of an installed tile job, so local pay moves Asheville prices more than the tile does.
The tile you choose
Budget ceramic costs $1–$4 per sq ft, mid-range porcelain $3–$9 per sq ft and natural stone $6–$25 per sq ft — and stone takes longer to cut and set ($9–$20 per sq ft labor against $5–$13 per sq ft).
Size and pattern
Large-format tile needs a flatter floor and two sets of hands ($8–$15 per sq ft labor). Mosaics and feature tile run $11–$28 per sq ft. Any pattern other than a straight lay adds 10–30% in time and waste.
What's under the tile
A flat concrete slab is the cheap case. A wood subfloor needs backer board ($5–$8 per sq ft) or an uncoupling mat, an out-of-level floor needs leveling ($2–$6 per sq ft), and old tile has to come out first ($2–$7 per sq ft).
Wet rooms
Showers need a waterproof membrane ($3–$8 per sq ft), a sloped pan ($760–$2,850 tiled) and careful detailing at every corner, so wall tile in a shower costs more per foot than floor tile in a hallway.
Minimums and small jobs
Most setters charge a $320–$690 minimum. A 40 sq ft bathroom floor costs $400–$960 in Asheville — far more per foot than a 300 sq ft living room at $3,600–$8,700.
Access and the age of the house
Stairs, elevators, paid parking and nowhere to run a wet saw add hours in Downtown & the River Arts District. Older homes in West Asheville bring old mud-set tile, uneven floors and surprise water damage under the toilet.
- Pick standard-size porcelain in a straight lay.Standard 12×12 or 12×24 porcelain costs $10–$24 per sq ft installed in Asheville; large-format, stone and patterns each add labor and waste.
- Buy the tile yourself, but let the setter spec the setting materials.Mid-range porcelain is $3–$9 per sq ft at the big-box stores — order 10–15% extra for cuts. Let the installer choose thinset, grout and membrane; the wrong ones fail.
- Do two rooms at once.One $460 minimum and one setup covers a bathroom floor and a backsplash. Priced separately, each small job carries its own minimum.
- Handle the demolition yourself, carefully.Tearing out old tile costs $2–$7 per sq ft from a pro. If you do it, protect the subfloor and budget $195–$780 for a dumpster or a $4–$7-a-foot dust-free service if you'd rather not breathe it.
- Don't skip the prep to save money.Leveling ($2–$6 per sq ft) and waterproofing ($3–$8 per sq ft) are the cheapest lines on the quote and the first things a cheap quote drops. A failed shower pan costs far more than the membrane.
- Get two itemized quotes.In North Carolina, ask for the per-foot price, the prep lines, the tile allowance and the warranty in writing, and compare totals, not the headline rate.
Asheville tile setters quote by the square foot, by the job or both. Before you pay a deposit, get these in writing:
- The setter's name, business name and proof of liability insurance
- Square footage measured on site, and the per-foot or flat price
- Who supplies the tile, how much overage is ordered, and the allowance if the setter buys it
- Demolition, disposal and dust control — included or priced per foot
- Floor prep: leveling, backer board or uncoupling mat, and what happens if the subfloor is rotten
- Waterproofing method and product for any shower or wet area
- Grout type and color, sealing, trim, thresholds and edge profiles
- Start date, days on site, and a workmanship guarantee
How much does it cost to tile a 100 sq ft bathroom floor in Asheville?
$955–$2,400 with standard ceramic or porcelain, and $1,500 is typical — about $15 a square foot for tile, setting materials and labor. Natural stone or a pattern pushes it toward the top.
What do tile setters charge per square foot in Asheville?
Labor alone is $5–$13 per sq ft for standard floor tile, $8–$15 per sq ft for large-format, $7–$18 per sq ft for walls and $11–$28 per sq ft for mosaics. With standard tile and setting materials, an installed floor is $10–$24 per sq ft.
How much does it cost to tile a shower in Asheville?
$1,400–$4,750 for walls and floor, about 100 square feet, including a waterproof membrane. A niche or bench adds $185–$465; a new tiled pan on its own is $760–$2,850.
How much is a kitchen backsplash in Asheville?
About $475–$1,350 for 30 square feet of subway tile, installed. Glass or marble mosaic pushes it higher; removing an old backsplash adds $2–$7 per sq ft.
How much does tile removal cost in Asheville?
$2–$7 per sq ft including disposal, so $200–$700 for a 100 sq ft floor. Dust-free removal with vacuum shrouds runs $4–$7 per sq ft.
What is the hourly rate for a tile setter in Asheville?
$40–$100 an hour, or $320–$800 a day. Most price by the square foot instead, with a $320–$690 minimum on small jobs.
Do I need a permit or a licensed contractor for tile work in North Carolina?
Most states don't license tile setters as a separate trade, and a floor or backsplash job rarely needs a permit. A shower rebuild that moves plumbing or replaces the pan often does — check your city's building department. This is general information, not legal advice.
How long does tile installation take?
About one day for a bathroom floor or a backsplash, two to three days for a shower, and a week or more for a whole house. Thinset needs to cure before grouting, so even a small job spans two visits.
Can new tile go over old tile?
Sometimes, if the old tile is sound, flat and well bonded — it saves the $2–$7 per sq ft removal cost but raises the floor and can trap problems. Most setters prefer to tear out, especially in showers.
Should I buy the tile myself?
Usually, yes — mid-range porcelain is $3–$9 per sq ft at the big-box stores, and you skip the markup. Order 10–15% extra for cuts and let the setter choose the thinset, grout and membrane.
Prices verified November 2026 · Cross-referenced against 77+ American pricing sources · See methodology
Prices for the Asheville metro area, November 2026. Outer suburbs may vary.
Get a fair tile installation quote in Asheville
Local tile setters · Free quotes · No obligation, no spam.