Skip to content
Independent United States Cost GuidesPrices verified November 2026 · 39 trades · 195 US cities · 221+ sources For pros →
Get a fair quote

Cost guides

Plumbing & water4 trades
Electrical & energy5 trades
Renovation8 trades
Structural7 trades
Outdoor & yard7 trades
Cleaning & maintenance8 trades

More

Get a fair quote
Cost guide

How much does tile installation cost in Columbus?

By Our research team · Last verified · Methodology

Updated November 2026Independently researched12 min read
Tile installation cost

Tile installation costs in Columbus

Columbus, OHChange location
Get free quotesFree · no obligation · max 2 pros
Normal range for Columbus, OH
$970–$2,400per 100 sq ft

Tiling a 100 sq ft bathroom floor in Columbus costs $970–$2,400 with $1,550 typical. Expect $10–$24 per sq ft installed for standard tile, $2–$7 per sq ft to tear out the old floor and $1,450–$4,850 for a shower.

How we get this data
Typical
$1,550
Low end
$485
High end
$4,850
100 sq ft floor
$970–$2,400
Installed per sq ft
$10–$24
Tile a shower
$1,450–$4,850
Backsplash
$485–$1,350

Want an exact price for your job?

Tell us the job. Casey checks it by text, then up to 2 local tile setters send you a real quote. Free, no obligation.

Get my fair quote →
Typical tile installation price: Columbus vs nearby citiesTypical price, per 100 sq ft. The line marks the US typical.
Cleveland, OH $1,600
Columbus, OHThis guide $1,550
Dayton, OH $1,500
Canton, OH $1,500
Akron, OH $1,500
Toledo, OH $1,500

The typical Columbus price is $1,550, 3% below the US typical of $1,600.

Where Columbus sits among 195 US metrosNumber of metros at each typical tile installation price, per 100 sq ft.

Columbus's price band

Columbus is cheaper than 44% of the 195 US metros we price for tile installation work.

Expect $970–$2,400 to tile a 100 sq ft bathroom floor in Columbus, with $1,550 the going rate for standard tile and labor. Bigger rooms cost less per foot and tiny rooms more: most setters charge a $330–$710 minimum, so a powder room floor costs about the same as a small bathroom. A tiled shower here is $1,450–$4,850.

Columbus tile and stone setters earn a median $47,050 a year, below the US figure, and its mix of old wood-floor housing and newer slab-built suburbs means prep lines vary from job to job.

Most states don't license tile setters as a separate trade, and a floor or backsplash job rarely needs a permit. A shower rebuild that moves plumbing or replaces the pan often does — check your city's building department. This is general information, not legal advice.

Comparing cities, or after the US-wide picture? See the national guide: Tile installation cost in the USA.

Quick answer

$970–$2,400 to tile a 100 sq ft bathroom floor in Columbus with standard ceramic or porcelain — typically $1,550 — about $16 per square foot installed. A tiled shower runs $1,450–$4,850. Verified November 2026. Get free Columbus quotes →

  • 100 sq ft bathroom floor, standard tile: $970–$2,400 ($1,550 typical)
  • Installed $10–$24 per sq ft; labor only $5–$13 per sq ft
  • Tile a shower $1,450–$4,850; kitchen backsplash $485–$1,350
  • Tile removal $2–$7 per sq ft; waterproofing $3–$8 per sq ft
  • Hourly rate $45–$105; minimum charge $330–$710

Prices verified November 2026 · Cross-referenced against 77+ American pricing sources · See methodology

Detailed pricing — Tile installation cost in Columbus 2026

Labor and setting materials included unless the row says otherwise; tile supply rows are the tile alone. Columbus metro, re-verified November 2026. Demolition, leveling and waterproofing are separate lines.

ServiceLowTypicalHigh
Floor tile, 100 sq ft bathroom floor — standard ceramic or porcelain (tile + labor)per 100 sq ft$970per 100 sq ft$1,550$2,400
Floor tile installed, standard ceramic or porcelain (tile + labor)per sq ft$10per sq ft$16$24
Floor tile installation, standard 12×12 to 12×24 (labor only)per sq ft$5per sq ft$9$13
Large-format floor tile, 24×24 and bigger (labor only)per sq ft$9per sq ft$11$15
Wall tile, standard (labor only)per sq ft$8per sq ft$11$19
Mosaic or feature tile (labor only)per sq ft$11per sq ft$17$28
Natural stone tile — marble, travertine, limestone (labor only)per sq ft$9per sq ft$14$21
Outdoor or patio tile, porcelain pavers on a slab (labor only)per sq ft$7per sq ft$11$19
Full bathroom, 60 sq ft floor + 140 sq ft walls (labor only)per bathroom$1,400per bathroom$2,100$3,450
Tile removal and disposalper sq ft$2per sq ft$4$7
Waterproofing membrane, showers and wet areas (installed)per sq ft$3per sq ft$5$8
Floor leveling and prep (self-leveling underlayment)per sq ft$2per sq ft$3$6
Tile setter hourly rateper hour$45per hour$70$105
Tile setter day rate (8 hours)per day$360per day$560$840
Tile supply, budget ceramicper sq ft$1per sq ft$2$4
Tile supply, mid-range porcelainper sq ft$3per sq ft$5$9
Tile supply, large-format porcelain (24×24, 24×48)per sq ft$2per sq ft$5$12
Tile supply, outdoor slip-resistant porcelain paversper sq ft$4per sq ft$8$15
Tile supply, mosaic sheets (ceramic, porcelain, glass, stone)per sq ft$4per sq ft$10$30
Tile supply, subway or backsplash ceramicper sq ft$2per sq ft$4$10
Tile supply, premium natural stone (marble, travertine, limestone)per sq ft$6per sq ft$12$25
Bathroom tile, 60 sq ft floor + 140 sq ft walls, mid-range porcelain (tile + labor)per bathroom$2,200per bathroom$3,500$5,850
Tile a shower, walls and floor, about 100 sq ft (tile + labor)per shower$1,450per shower$2,600$4,850
Kitchen backsplash, about 30 sq ft, subway tile (tile + labor)per job$485per job$870$1,350
tile installation jobs in Columbus: what they costPer sq ft, low to high with the typical price marked. Every line is in the table above.
Mosaic or feature tile (labor only) $17$11–$28
Floor tile installed, standard ceramic or porcelain (tile + labor) $16$10–$24
Natural stone tile — marble, travertine, limestone (labor only) $14$9–$21
Tile supply, premium natural stone (marble, travertine, limestone) $12$6–$25
Large-format floor tile, 24×24 and bigger (labor only) $11$9–$15
Wall tile, standard (labor only) $11$8–$19
Outdoor or patio tile, porcelain pavers on a slab (labor only) $11$7–$19
Tile supply, mosaic sheets (ceramic, porcelain, glass, stone) $10$4–$30
Floor tile installation, standard 12×12 to 12×24 (labor only) $9$5–$13
Tile supply, outdoor slip-resistant porcelain pavers $8$4–$15
Waterproofing membrane, showers and wet areas (installed) $5$3–$8
Tile supply, mid-range porcelain $5$3–$9
Already got a quote?
Check it against these Columbus prices — free, no sign-up.
$

Got it as a PDF or photo? Upload up to 3 quotes and compare →

Free quotes

Get free quotes from up to 2 local tile setters in Columbus

Free · No obligation · About a minute

  1. 1The job
  2. 2Budget
  3. 3Your details
Casey · LocalGoingRate

What do you want tiled?

Tap one to start.

Prices verified November 2026 · Cross-referenced against 77+ American pricing sources · See methodology

Figures cover the Columbus metro area. Older buildings and tight access in Downtown, Short North & Franklinton push jobs toward the top of each range.

How tile installation costs vary across Columbus

Tile installation prices across Columbus

Same trade, four price bands. Rates run highest in Downtown, Short North & Franklinton, older housing in East Columbus & Linden brings more prep work, and Ohio State & Clintonville is usually the cheapest place to book.

Tile installation prices across ColumbusTypical range by part of the metro, per 100 sq ft. The line marks the Columbus typical.
Downtown, Short North & Franklinton5–15% above the city average $1,250–$2,150per 100 sq ft
East Columbus & LindenUp to 10% above average $1,200–$2,050per 100 sq ft
Ohio State & ClintonvilleAt or a little below average $1,100–$1,900per 100 sq ft
Dublin, Westerville & the suburbsAround average $1,100–$1,950per 100 sq ft

Downtown, Short North & Franklinton

5–15% above the city average
Downtown, Short North, Franklinton
Floor tile, 100 sq ft
$1,250–$2,150 per 100 sq ft
Tiled shower
$2,250–$4,100 / tiled shower

Apartments and condos where access is the cost: elevators to book, nowhere to cut tile, and debris that has to be bagged and carried out. Simple floors price normally; showers and bathrooms run at the top of the range.

East Columbus & Linden

Up to 10% above average
Linden, Near East, Whitehall
Floor tile, 100 sq ft
$1,200–$2,050 per 100 sq ft
Tiled shower
$2,100–$3,850 / tiled shower

A remodel-heavy area with older houses. Out-of-level floors, old mud-set tile and surprise rot under the toilet are common, so ask how prep is priced before work starts.

Ohio State & Clintonville

At or a little below average
University District, Clintonville
Floor tile, 100 sq ft
$1,100–$1,900 per 100 sq ft
Tiled shower
$1,950–$3,600 / tiled shower

Older housing near campus, much of it rented. Standard-size porcelain in a straight lay is the common job, and prices sit a little below average.

Dublin, Westerville & the suburbs

Around average
Dublin, Westerville, Reynoldsburg, Hilliard
Floor tile, 100 sq ft
$1,100–$1,950 per 100 sq ft
Tiled shower
$2,000–$3,650 / tiled shower

Mostly single-family streets with easy access and a driveway to set up the saw, so rates sit near the city average.

What you'll actually pay — job by job

Real-world tile installation costs in Columbus

Here's what common tile installation jobs cost in Columbus in 2026, standard tile, setting materials and labor included.

Small bathroom floor, 40 sq ft of porcelain

$400–$960

At $10–$24 per sq ft installed, 40 square feet works out to $400–$960, and most Columbus setters charge a minimum of $330–$710 whatever the size — so budget $400–$960. Pulling the toilet and resetting it is usually included; a new wax ring and supply line are small extras.

Tile a shower, walls and floor, with waterproofing

$1,450–$4,850

A full tiled shower in Columbus — about 100 square feet of wall and floor tile over a waterproof membrane — runs $1,450–$4,850. A recessed niche or bench adds $190–$475, for $1,650–$5,350 in all. If the shower valve or drain moves, a plumber's permit and bill are extra.

Kitchen backsplash, about 30 sq ft of subway tile

$485–$1,350

Expect $485–$1,350 for a standard backsplash between the counter and the upper cabinets. The tile itself is only $2–$10 per sq ft; the price is the cutting around outlets and windows. Removing an old tile backsplash first adds $2–$7 per sq ft.

Replace a kitchen floor: tear out 150 sq ft of old tile, level, lay porcelain

$2,100–$5,550

Removal and disposal at $4 a square foot ($300–$1,050), leveling the floor at $3 a foot and new porcelain at $16 a foot installed ($1,500–$3,600) comes to about $3,450 in Columbus. Expect two to three days and a lot of dust — ask about dust-free removal ($4–$7 per sq ft).

Full bathroom, floor and walls, with a heated floor

$2,800–$7,350

Tiling a 60 sq ft floor and 140 sq ft of walls in mid-range porcelain is $2,200–$5,850. An electric heating mat under the floor adds $12 a square foot plus $135–$340 for the thermostat, about $845 for a 50 sq ft bathroom, for $2,800–$7,350 in all. The mat needs its own circuit, so an electrician's visit is extra.

How much does tile installation cost in Columbus?

$970–$2,400, and $1,550 is the number most Columbus homeowners see for a 100 sq ft floor with standard tile. On small rooms the minimum matters more than the per-foot rate: most setters charge a $330–$710 minimum, so a 40 sq ft bathroom floor costs about $400–$960.

For big floors, ask for a per-foot price. Columbus setters charge about $10–$24 per sq ft installed for standard porcelain and $13–$29 per sq ft for large-format, so a 300 sq ft living area runs $3,900–$8,700, based on 77 sources checked in November 2026.

Lines on a tile quote in Columbus (2026)

A 100 sq ft bathroom floor runs $970–$2,400, labor alone $5–$13 per sq ft, and most setters charge a $330–$710 minimum on small jobs.

Line on the quoteLowTypicalHigh
Floor tile, 100 sq ft bathroom floor (tile + labor)$970$1,550$2,400
Floor tile installed, per sq ft (tile + labor)$10$16$24
Floor tile labor only, per sq ft$5$9$13
Tile setter hourly rate$45$70$105
Minimum charge on small jobs$330$475$710
Tile removal and disposal, per sq ft$2$4$7
Waterproofing membrane, per sq ft$3$5$8
Floor leveling and prep, per sq ft$2$3$6

Small jobs cost more per foot in Columbus: a $475 minimum spread over a 20 sq ft powder room is $24 a square foot. Pair it with a backsplash or a second floor and the minimum stops hurting.

What moves a tile quote in Columbus:

  • The tile — budget ceramic is $1–$4 per sq ft, mid-range porcelain $3–$9 per sq ft, natural stone $6–$25 per sq ft, and stone costs more to set too.
  • Tile size and pattern — large-format runs $9–$15 per sq ft in labor against $5–$13 per sq ft for standard sizes; herringbone, diagonal or mosaic adds 10–30% in time and waste.
  • Prep — tearing out old tile ($2–$7 per sq ft), leveling ($2–$6 per sq ft) and backer board ($5–$8 per sq ft) are separate lines, and they decide whether the job lasts.
  • Wet areas — showers need a waterproof membrane ($3–$8 per sq ft) and a sloped pan ($775–$2,900 tiled), which is why a shower costs $1,450–$4,850.
  • Minimums and access — most setters charge a $330–$710 minimum; stairs, elevators and no place to set up a wet saw add time in Downtown, Short North & Franklinton.

Ask every Columbus tile setter the same four things: the per-foot or flat price, what prep and waterproofing are included, who buys the tile and setting materials, and whether they carry liability insurance. Get a quote for your tile job →

Tile installation cost in Columbus by room size

Quick answer

A 40 sq ft bathroom floor is $400–$960 (the minimum charge sets it), a 100 sq ft bathroom floor $970–$2,400, a 150 sq ft kitchen floor $1,500–$3,600 and a 300 sq ft living area in large-format porcelain $3,900–$8,700.

Worked example: a kitchen floor in Columbus. 150 square feet of standard porcelain at $16 a foot installed is about $2,400. Add tear-out of the old tile at $4 a foot ($600) and leveling at $3 a foot, and the job comes to about $3,450.

A whole house of tile floors — 1,500 square feet of porcelain — runs about $13,500–$32,400 in Columbus with a 10% volume discount, while a 200 sq ft porcelain-paver patio over a slab is $2,600–$7,000.

Tile types and what each costs installed in Columbus

Tile typeCostBest for
Ceramic tile (basic glazed)$8–$19 per sq ft installedBathroom floors and walls on a budget; easy to cut, the cheapest tile to buy and to lay
Porcelain tile (standard 12×12 or 12×24)$10–$24 per sq ft installedKitchens, bathrooms and entries — denser and harder than ceramic, so it takes wear and water without sealing
Large-format porcelain (24×24, 24×48)$13–$29 per sq ft installedOpen living areas and big showers; fewer grout lines, but the floor must be flat and the labor rate is higher
Natural stone (marble, travertine, limestone)$17–$50 per sq ft installedStatement floors and shower walls; needs sealing and a setter who works stone every week
Mosaic and feature tile$17–$60 per sq ft installedShower floors, niches and accent strips — small pieces, slow to set, so labor per foot is the highest
Subway tile (ceramic backsplash and wall tile)$12–$30 per sq ft installedKitchen backsplashes and tub surrounds; cheap tile, moderate labor
Outdoor slip-resistant porcelain pavers$13–$35 per sq ft installedPatios and pool decks over a concrete slab; frost-proof and textured for wet feet
Heated floor add-on (electric mat under the tile)$8–$19 per sq ft addedBathroom floors in cold climates — add $135–$340 for the thermostat hookup
Cost by tile type in ColumbusTypical range, per sq ft installed.
Ceramic tile (basic glazed) $8–$19per sq ft installed
Porcelain tile (standard 12×12 or 12×24) $10–$24per sq ft installed
Large-format porcelain (24×24, 24×48) $13–$29per sq ft installed
Natural stone (marble, travertine, limestone) $17–$50per sq ft installed
Mosaic and feature tile $17–$60per sq ft installed
Subway tile (ceramic backsplash and wall tile) $12–$30per sq ft installed
Outdoor slip-resistant porcelain pavers $13–$35per sq ft installed
Columbus tip: if you want the look of marble, a marble-look porcelain costs $10–$24 per sq ft installed against $17–$50 per sq ft for the real thing, and it never needs sealing.

Per-square-foot rate vs what you actually pay — the Columbus tile bill

A $16-a-foot price rarely shows up as $16 a foot on the invoice. Most Columbus setters charge a $330–$710 minimum, so a 20 sq ft powder room floor costs the minimum, not $320. Below about 50 square feet, ask for a flat price and pair the job with something else.

Above that, the per-foot rate works, but the prep lines decide the total: demolition at $2–$7 per sq ft, leveling at $2–$6 per sq ft, backer board at $5–$8 per sq ft and, in a shower, waterproofing at $3–$8 per sq ft. Compare quotes line by line — tile, labor, prep, waterproofing, trim, haul-away — not the headline rate.

What's included in a tile quote in Columbus (and what costs extra)

A standard tile quote covers layout, setting the tile in thinset, grouting, cleanup and hauling away the scraps. Often left out:

  • The tile itself — $1–$4 per sq ft for budget ceramic to $6–$25 per sq ft for natural stone, plus 10–15% overage
  • Demolition and disposal — $2–$7 per sq ft, plus a $195–$785 dumpster on bigger tear-outs
  • Prep — leveling $2–$6 per sq ft, backer board $5–$8 per sq ft, waterproofing $3–$8 per sq ft
  • Trim and transitions — bullnose, metal edge profiles, a marble threshold ($30–$75), and the plumber or electrician if a toilet, vanity, valve or heating mat is involved

Ask for the price in writing before work starts, and for proof of liability insurance.

What affects tile installation costs in Columbus

Local wages

Federal data put the median pay for tile and stone setters in the Columbus metro at $47,050 a year, about 16% below the US median of $55,690. Labor is about 60% of an installed tile job, so local pay moves Columbus prices more than the tile does.

The tile you choose

Budget ceramic costs $1–$4 per sq ft, mid-range porcelain $3–$9 per sq ft and natural stone $6–$25 per sq ft — and stone takes longer to cut and set ($9–$21 per sq ft labor against $5–$13 per sq ft).

Size and pattern

Large-format tile needs a flatter floor and two sets of hands ($9–$15 per sq ft labor). Mosaics and feature tile run $11–$28 per sq ft. Any pattern other than a straight lay adds 10–30% in time and waste.

What's under the tile

A flat concrete slab is the cheap case. A wood subfloor needs backer board ($5–$8 per sq ft) or an uncoupling mat, an out-of-level floor needs leveling ($2–$6 per sq ft), and old tile has to come out first ($2–$7 per sq ft).

Wet rooms

Showers need a waterproof membrane ($3–$8 per sq ft), a sloped pan ($775–$2,900 tiled) and careful detailing at every corner, so wall tile in a shower costs more per foot than floor tile in a hallway.

Minimums and small jobs

Most setters charge a $330–$710 minimum. A 40 sq ft bathroom floor costs $400–$960 in Columbus — far more per foot than a 300 sq ft living room at $3,900–$8,700.

Access and the age of the house

Stairs, elevators, paid parking and nowhere to run a wet saw add hours in Downtown, Short North & Franklinton. Older homes in East Columbus & Linden bring old mud-set tile, uneven floors and surprise water damage under the toilet.

How to save on tile installation in Columbus
  1. Pick standard-size porcelain in a straight lay.Standard 12×12 or 12×24 porcelain costs $10–$24 per sq ft installed in Columbus; large-format, stone and patterns each add labor and waste.
  2. Buy the tile yourself, but let the setter spec the setting materials.Mid-range porcelain is $3–$9 per sq ft at the big-box stores — order 10–15% extra for cuts. Let the installer choose thinset, grout and membrane; the wrong ones fail.
  3. Do two rooms at once.One $475 minimum and one setup covers a bathroom floor and a backsplash. Priced separately, each small job carries its own minimum.
  4. Handle the demolition yourself, carefully.Tearing out old tile costs $2–$7 per sq ft from a pro. If you do it, protect the subfloor and budget $195–$785 for a dumpster or a $4–$7-a-foot dust-free service if you'd rather not breathe it.
  5. Don't skip the prep to save money.Leveling ($2–$6 per sq ft) and waterproofing ($3–$8 per sq ft) are the cheapest lines on the quote and the first things a cheap quote drops. A failed shower pan costs far more than the membrane.
  6. Get two itemized quotes.In Ohio, ask for the per-foot price, the prep lines, the tile allowance and the warranty in writing, and compare totals, not the headline rate.
What a tile quote in Columbus should include

Columbus tile setters quote by the square foot, by the job or both. Before you pay a deposit, get these in writing:

  • The setter's name, business name and proof of liability insurance
  • Square footage measured on site, and the per-foot or flat price
  • Who supplies the tile, how much overage is ordered, and the allowance if the setter buys it
  • Demolition, disposal and dust control — included or priced per foot
  • Floor prep: leveling, backer board or uncoupling mat, and what happens if the subfloor is rotten
  • Waterproofing method and product for any shower or wet area
  • Grout type and color, sealing, trim, thresholds and edge profiles
  • Start date, days on site, and a workmanship guarantee
Frequently asked questions — Tile installation cost in Columbus
How much does it cost to tile a 100 sq ft bathroom floor in Columbus?

$970–$2,400 with standard ceramic or porcelain, and $1,550 is typical — about $16 a square foot for tile, setting materials and labor. Natural stone or a pattern pushes it toward the top.

What do tile setters charge per square foot in Columbus?

Labor alone is $5–$13 per sq ft for standard floor tile, $9–$15 per sq ft for large-format, $8–$19 per sq ft for walls and $11–$28 per sq ft for mosaics. With standard tile and setting materials, an installed floor is $10–$24 per sq ft.

How much does it cost to tile a shower in Columbus?

$1,450–$4,850 for walls and floor, about 100 square feet, including a waterproof membrane. A niche or bench adds $190–$475; a new tiled pan on its own is $775–$2,900.

How much is a kitchen backsplash in Columbus?

About $485–$1,350 for 30 square feet of subway tile, installed. Glass or marble mosaic pushes it higher; removing an old backsplash adds $2–$7 per sq ft.

How much does tile removal cost in Columbus?

$2–$7 per sq ft including disposal, so $200–$700 for a 100 sq ft floor. Dust-free removal with vacuum shrouds runs $4–$7 per sq ft.

What is the hourly rate for a tile setter in Columbus?

$45–$105 an hour, or $360–$840 a day. Most price by the square foot instead, with a $330–$710 minimum on small jobs.

Do I need a permit or a licensed contractor for tile work in Ohio?

Most states don't license tile setters as a separate trade, and a floor or backsplash job rarely needs a permit. A shower rebuild that moves plumbing or replaces the pan often does — check your city's building department. This is general information, not legal advice.

How long does tile installation take?

About one day for a bathroom floor or a backsplash, two to three days for a shower, and a week or more for a whole house. Thinset needs to cure before grouting, so even a small job spans two visits.

Can new tile go over old tile?

Sometimes, if the old tile is sound, flat and well bonded — it saves the $2–$7 per sq ft removal cost but raises the floor and can trap problems. Most setters prefer to tear out, especially in showers.

Should I buy the tile myself?

Usually, yes — mid-range porcelain is $3–$9 per sq ft at the big-box stores, and you skip the markup. Order 10–15% extra for cuts and let the setter choose the thinset, grout and membrane.

Prices verified November 2026 · Cross-referenced against 77+ American pricing sources · See methodology

Prices for the Columbus metro area, November 2026. Outer suburbs may vary.

Our methodology
These are independent estimates built from published cost guides, retailer tile and product prices, dated city cost pages, federal wage data and tile-industry trade data. No tile setter can pay to change them, so always get two or three quotes. Last reviewed November 2026. Read our full methodology →

Get a fair tile installation quote in Columbus

Local tile setters · Free quotes · No obligation, no spam.

Get quotes in Columbus →Max 2 tile setters will contact you
Get quotes in ColumbusMax 2 tile setters · free · no spam→