Skip to content
Independent United States Cost GuidesPrices verified November 2026 · 39 trades · 195 US cities · 221+ sources For pros →
Get a fair quote

Cost guides

Plumbing & water4 trades
Electrical & energy5 trades
Renovation8 trades
Structural7 trades
Outdoor & yard7 trades
Cleaning & maintenance8 trades

More

Get a fair quote
Cost guide

How much does flooring cost in Tacoma?

By Our research team · Last verified · Methodology

Updated November 2026Independently researched12 min read
Flooring cost

Flooring costs in Tacoma

Tacoma, WAChange location
Get free quotesFree · no obligation · max 2 pros
Normal range for Tacoma, WA
$2,100–$6,350per 500 sq ft

Most 500 sq ft LVP floors in Tacoma cost $2,100–$6,350 for materials and labor. Most Tacoma homeowners pay about $3,700, or $7 a square foot. Laminate is $4–$12 a foot, engineered hardwood $7–$20.

How we get this data
Typical
$3,700
Low end
$1,350
High end
$9,000
500 sq ft LVP
$2,100–$6,350
LVP per sq ft
$4–$13
Carpet per sq ft
$3–$10
Solid hardwood per sq ft
$8–$25

Want an exact price for your job?

Tell us the job. Casey checks it by text, then up to 2 local flooring installers send you a real quote. Free, no obligation.

Get my fair quote →
Typical flooring price: Tacoma vs nearby citiesTypical price, per 500 sq ft. The line marks the US typical.
Seattle, WA $3,750
Tacoma, WAThis guide $3,700
Portland, OR $3,700
Salem, OR $3,550
Spokane, WA $3,500
Eugene, OR $3,450
Boise, ID $3,400

The typical Tacoma price is $3,700, 6% above the US typical of $3,500.

Where Tacoma sits among 195 US metrosNumber of metros at each typical flooring price, per 500 sq ft.

Tacoma's price band

Tacoma is pricier than 83% of the 195 US metros we price for flooring work.

Expect $4–$13 a square foot for LVP in Tacoma, $3–$10 for carpet, $7–$20 for engineered wood and $8–$25 for solid hardwood, all installed. Carpeting a 12×12 bedroom is $450–$1,500; a whole 1,500 sq ft home in LVP $6,350–$19,100; sanding and refinishing 500 sq ft of hardwood $1,650–$4,400.

Washington requires contractors to register with the state Department of Labor & Industries and carry a bond and insurance; verify the registration online before the crew starts. Seattle-Tacoma floor layers earn a median $57,590 a year, close to the US figure.

Every installed price here covers the flooring, the crew and the basic finish work. Old-floor removal is $1–$4 a square foot on top, subfloor repair $3–$11 where it is needed, and many Tacoma crews charge $30–$140 a room to move furniture.

Comparing cities, or after the US-wide picture? See the national guide: Flooring cost in the USA.

Quick answer

$2,100–$6,350 to install 500 sq ft of luxury vinyl plank in Tacoma, materials and labor — typically $3,700. Per square foot installed: LVP $4–$13, carpet $3–$10, laminate $4–$12, solid hardwood $8–$25. Verified November 2026. Get free Tacoma quotes →

  • 500 sq ft of LVP installed: $2,100–$6,350 ($3,700 typical)
  • Per sq ft: LVP $4–$13; laminate $4–$12; carpet $3–$10
  • Hardwood: engineered $7–$20, solid $8–$25 per sq ft; refinishing $3–$9
  • Removal $1–$4 per sq ft; subfloor repair $3–$11; stairs $65–$265 a step in wood
  • Priciest area to work in: Downtown Tacoma & Stadium District; lowest quotes: Puyallup, Federal Way & Olympia

Prices verified November 2026 · Cross-referenced against 84+ American pricing sources · See methodology

Detailed pricing — Flooring cost in Tacoma 2026

Installed prices include materials and labor; removal, subfloor work and furniture moving are their own lines. Tacoma metro, re-verified November 2026.

ServiceLowTypicalHigh
Luxury vinyl plank (LVP), 500 sq ft, materials and laborper 500 sq ft$2,100per 500 sq ft$3,700$6,350
Luxury vinyl plank (LVP), installedper sq ft$4per sq ft$7$13
Rigid-core vinyl plank (SPC or WPC), installedper sq ft$5per sq ft$8$14
Sheet vinyl, installedper sq ft$2per sq ft$4$8
Laminate, installedper sq ft$4per sq ft$6$12
Engineered hardwood, installedper sq ft$7per sq ft$13$20
Solid hardwood, installedper sq ft$8per sq ft$15$25
Bamboo flooring, installedper sq ft$6per sq ft$11$18
Carpet with pad, mid-grade, installedper sq ft$3per sq ft$5$10
Ceramic or porcelain tile floor, installedper sq ft$11per sq ft$18$30
Refinish hardwood floors (sand, stain and finish)per sq ft$3per sq ft$5$9
Refinish 500 sq ft of hardwoodper 500 sq ft$1,650per 500 sq ft$2,750$4,400
Labor only to lay a floating floor you bought (LVP or laminate)per sq ft$2per sq ft$3$6
Old flooring removal and disposalper sq ft$1per sq ft$2$4
Subfloor repair or replacement (plywood or OSB)per sq ft$3per sq ft$6$11
Baseboards, supply and installper linear ft$5per linear ft$8$11
Carpet a stair (tread and riser)per step$25per step$50$70
Hardwood or LVP stair treads and risersper step$65per step$125$265
Carpet one 12×12 bedroom (144 sq ft), with padper room$450per room$750$1,500
Whole home LVP, 1,500 sq ft, installedper home$6,350per home$11,150$19,100
Whole home solid hardwood, 2,000 sq ft, installedper home$16,900per home$29,550$52,750
Recarpet a 3-bedroom home, 1,500 sq ft, with padper home$4,700per home$7,800$15,650
Flooring installer hourly rate (small jobs and repairs)/hr$50/hr$80$125
Furniture moving by the crewper room$30per room$65$140
flooring jobs in Tacoma: what they costPer sq ft, low to high with the typical price marked. Every line is in the table above.
Ceramic or porcelain tile floor, installed $18$11–$30
Solid hardwood, installed $15$8–$25
Engineered hardwood, installed $13$7–$20
Bamboo flooring, installed $11$6–$18
Rigid-core vinyl plank (SPC or WPC), installed $8$5–$14
Luxury vinyl plank (LVP), installed $7$4–$13
Laminate, installed $6$4–$12
Subfloor repair or replacement (plywood or OSB) $6$3–$11
Carpet with pad, mid-grade, installed $5$3–$10
Refinish hardwood floors (sand, stain and finish) $5$3–$9
Sheet vinyl, installed $4$2–$8
Labor only to lay a floating floor you bought (LVP or laminate) $3$2–$6
Already got a quote?
Check it against these Tacoma prices — free, no sign-up.
$

Got it as a PDF or photo? Upload up to 3 quotes and compare →

Free quotes

Get free quotes from up to 2 local flooring installers in Tacoma

Free · No obligation · About a minute

  1. 1The job
  2. 2Budget
  3. 3Your details
Casey · LocalGoingRate

What floor do you need a price on?

Tap one to start.

Prices verified November 2026 · Cross-referenced against 84+ American pricing sources · See methodology

Figures are for the Tacoma metro area. Trip fees can apply on the far edges; older buildings in Downtown Tacoma & Stadium District cost the most to work in.

How flooring costs vary across Tacoma

Flooring prices across Tacoma

Same box of flooring, four price bands. Parking, stairs and old subfloors push Downtown Tacoma & Stadium District to the top; Puyallup, Federal Way & Olympia sits at or below the city typical.

Flooring prices across TacomaTypical range by part of the metro, per 500 sq ft. The line marks the Tacoma typical.
Downtown Tacoma & Stadium District6–12% above the city average $2,250–$7,100per 500 sq ft
Hilltop & South TacomaStandard to 6% above $2,150–$6,750per 500 sq ft
Eastside & LakewoodStandard pricing $2,100–$6,350per 500 sq ft
Puyallup, Federal Way & OlympiaStandard; bigger jobs $2,050–$6,550per 500 sq ft

Downtown Tacoma & Stadium District

6–12% above the city average
Downtown, Stadium District, Hilltop
500 sq ft LVP
$2,250–$7,100 per 500 sq ft
12×12 room
$610–$2,050 / 12×12 room in LVP

Older apartments and tight lots. Uneven subfloors and glued-down old vinyl add prep time, so quotes here sit at the top of the city range.

Hilltop & South Tacoma

Standard to 6% above
Hilltop, South Tacoma, South End
500 sq ft LVP
$2,150–$6,750 per 500 sq ft
12×12 room
$585–$1,950 / 12×12 room in LVP

Renovated older homes next to new builds. Standard installed rates; the extras are subfloor leveling and removing layers of old flooring.

Eastside & Lakewood

Standard pricing
Eastside, Lakewood, Parkland
500 sq ft LVP
$2,100–$6,350 per 500 sq ft
12×12 room
$575–$1,850 / 12×12 room in LVP

Mostly houses on slabs or crawl spaces. Quotes cluster around the city typical; moisture testing matters on slabs.

Puyallup, Federal Way & Olympia

Standard; bigger jobs
Puyallup, Federal Way, University Place, Olympia
500 sq ft LVP
$2,050–$6,550 per 500 sq ft
12×12 room
$565–$1,900 / 12×12 room in LVP

Bigger homes and open floor plans. The per-square-foot rate is standard, but 1,500–2,000 sq ft jobs make the bill the largest in the metro.

What you'll actually pay — job by job

Real-World Flooring Costs in Tacoma

Here's what common flooring jobs cost in Tacoma in 2026, materials and labor for 500 sq ft of luxury vinyl plank.

Carpet out, LVP in: 500 sq ft open-plan living area — 1–2 days

$2,600–$8,350

The base job ($2,100–$6,350) plus pulling and hauling the old carpet ($500–$2,000). Most Tacoma jobs land near $3,700 before removal; a rigid-core plank or glue-down install reaches the top.

Carpet one 12×12 bedroom with new pad — half a day

$450–$1,500

Mid-grade carpet, pad, tack strips and labor at $3–$10 a square foot. Old carpet removal is often included; ask. Stairs are extra at $25–$70 a step.

Refinish 500 sq ft of oak floors — 3–5 days with drying

$1,650–$4,400

Sand to bare wood, stain and three coats of finish at $3–$9 a square foot. About four-fifths of the bill is labor. Dustless sanding and dark stains add to it.

Solid hardwood, 500 sq ft, installed — 3–5 days

$4,000–$12,500

Oak plank nailed to a plywood subfloor at $8–$25 a square foot. Prefinished boards cost more to buy and less to lay; site-finished boards are the reverse. Engineered wood is $3,500–$10,000 for the same area.

Water-damaged floor: new subfloor patch plus LVP — 2 days

$875–$2,950

Replacing 100 sq ft of swollen subfloor ($300–$1,100) and laying LVP in the 12×12 room ($575–$1,850). Keep photos and the plumber's invoice: water damage is one of the biggest causes of homeowners insurance claims.

How much does flooring cost in Tacoma?

Between $2,100 and $6,350 for 500 sq ft of LVP, materials and labor, and $3,700 is the price most Tacoma homeowners pay. About half of that is the product; the rest is the crew's time, underlayment, transitions and the warranty on the work.

Whole-home jobs get a better rate per foot but a bigger bill: 1,500 sq ft of LVP is $6,350–$19,100, recarpeting a 3-bedroom home $4,700–$15,650, and 2,000 sq ft of solid hardwood $16,900–$52,750. Re-checked against 84 sources in November 2026.

Flooring prices in Tacoma (2026): per square foot, installed

Luxury vinyl plank costs $4–$13 a square foot installed in Tacoma, carpet $3–$10, laminate $4–$12, engineered hardwood $7–$20 and solid hardwood $8–$25.

Line on the quoteLowTypicalHigh
Luxury vinyl plank (LVP), per sq ft$4$7$13
Laminate, per sq ft$4$6$12
Carpet with pad, per sq ft$3$5$10
Engineered hardwood, per sq ft$7$13$20
Solid hardwood, per sq ft$8$15$25
Ceramic or porcelain tile, per sq ft$11$18$30
Refinish hardwood, per sq ft$3$5$9
Remove old flooring, per sq ft$1$2$4

Replace or refinish in Tacoma: if there is solid oak under the carpet, sanding and refinishing at $5 a foot costs less than every new floor except budget carpet, and real estate agents report refinished wood recoups more than it costs at resale.

What moves a flooring quote in Tacoma:

  • Material — carpet and sheet vinyl at $3–$8 a foot sit at the bottom; solid hardwood and tile at $8–$30 at the top.
  • What is under the old floor — subfloor repair runs $3–$11 a square foot where boards are soft or uneven.
  • Removal — $1–$4 a square foot; glued-down vinyl and tile cost the most to pull.
  • Stairs — $25–$70 a step in carpet, $65–$265 in wood or LVP treads.
  • Job size — small rooms pay a minimum charge; 1,500 sq ft whole-home jobs get a lower rate per foot ($6,350–$19,100 in LVP).

Ask every Tacoma installer for the same six things: price per square foot with the product named, removal and disposal, subfloor repair rate, stairs and transitions, baseboards or shoe molding, and the labor warranty. Compare those, not the headline price. Get a quote for your flooring job →

Flooring Cost in Tacoma by Home Size

Quick answer

LVP installed: 1,000 sq ft $4,000–$13,000, 1,500 sq ft $6,000–$19,500, 2,000 sq ft $8,000–$26,000. Carpet for the same areas: $3,000–$10,000, $4,500–$15,000, $6,000–$20,000. Solid hardwood, 2,000 sq ft: $16,900–$52,750.

Worked example: a Tacoma 3-bedroom home with 1,500 sq ft of worn carpet. LVP through the living areas and hallway (1,000 sq ft, $7,000) plus new carpet in three bedrooms (500 sq ft, $2,500) comes to about $9,500 at typical prices, plus about $1,650 to pull and haul the old carpet.

Going all hardwood instead: 1,500 sq ft of solid oak at $22,500, or engineered wood at $19,500, with the staircase in matching wood treads adding $845–$3,450. That only makes sense if the house has a plywood subfloor and you plan to stay or sell to buyers who pay for wood.

Tacoma Flooring Costs by Material

MaterialCostBest for
Luxury vinyl plank (LVP)$4–$13 per sq ftKitchens, basements and busy family rooms. Waterproof, click-lock, about 25 years of life. The most installed floor in the US.
Rigid-core vinyl plank (SPC or WPC)$5–$14 per sq ftUneven slabs and sunny rooms. Stone (SPC) or wood (WPC) core hides small subfloor dips and dents less than flexible vinyl.
Sheet vinyl$2–$8 per sq ftBathrooms, laundry rooms and rentals. Seamless and cheap; harder to repair one spot.
Laminate$4–$12 per sq ftBedrooms, living rooms and hallways on a budget. Hard wear layer, 15–25 years; most types swell if water sits.
Engineered hardwood$7–$20 per sq ftReal wood over concrete slabs and in humid climates. Can be refinished once or twice; 50+ years.
Solid hardwood$8–$25 per sq ftAbove-grade rooms on a plywood subfloor. Refinish every 7–10 years and it lasts 100+ years. Best resale value.
Bamboo$6–$18 per sq ftA hard, fast-growing wood look. Strand-woven bamboo is very hard; cheap bamboo dents and fades.
Carpet$3–$10 per sq ftBedrooms, stairs and upstairs rooms. Warm and quiet; plan on replacing it every 8–10 years.
Ceramic or porcelain tile$11–$30 per sq ftBathrooms, entries and hot climates. Lasts 75+ years; cold and hard underfoot, and the costliest labor.
Polished concrete (existing slab)$3–$16 per sq ftBasements, garages and modern slab homes. Grinds and seals the slab you already have.
Cost by material in TacomaTypical range, per sq ft.
Luxury vinyl plank (LVP) $4–$13per sq ft
Rigid-core vinyl plank (SPC or WPC) $5–$14per sq ft
Sheet vinyl $2–$8per sq ft
Laminate $4–$12per sq ft
Engineered hardwood $7–$20per sq ft
Solid hardwood $8–$25per sq ft
Bamboo $6–$18per sq ft
Carpet $3–$10per sq ft
Ceramic or porcelain tile $11–$30per sq ft
Polished concrete (existing slab) $3–$16per sq ft
Tacoma tip: ask for the wear layer in mils, not just the brand. A 20 mil LVP costs little more than a 12 mil one inside the $4–$13 range and lasts far longer in a busy kitchen.

Box price vs. installed price — the Tacoma flooring bill

Mid-grade LVP costs $3–$6 a square foot in the box and premium rigid-core plank $6–$10, but laid in Tacoma the floor is $4–$13. The difference pays for a crew at $50–$125 an hour, underlayment ($0.50–$3.50 a foot where needed), transitions ($5–$30 each), 10% waste and a warranty on the work.

Click-lock LVP and laminate are fair DIY jobs on a flat, dry subfloor: the labor-only line ($2–$6 a square foot) is what you save, about $1,000–$3,000 on 500 sq ft. Leave hardwood, tile, stairs and anything over a damp slab to a pro, and never sand or scrape old vinyl tile from before the 1980s: it can hold asbestos.

What's included in a Tacoma flooring quote (and what costs extra)

A standard installed price covers the flooring, underlayment where the product needs it, labor, transitions at doorways and a labor warranty. The headline price often leaves out:

  • Old floor removal and disposal — $1–$4 a square foot
  • Subfloor repair or leveling — $3–$11 a square foot where boards are soft or the slab is uneven
  • Stairs — $25–$70 a step in carpet, $65–$265 in wood or LVP
  • Baseboards, shoe molding and furniture — $5–$11 a linear foot for trim; $30–$140 a room to move furniture

Ask how long the labor warranty lasts and whether the product warranty needs a certified installer; good companies put both in writing.

What Affects Flooring Costs in Tacoma

Material

Installed per square foot in Tacoma: sheet vinyl $2–$8, carpet $3–$10, laminate $4–$12, LVP $4–$13, engineered hardwood $7–$20, solid hardwood $8–$25, tile $11–$30.

Room size and layout

A 12×12 bedroom in LVP is $575–$1,850; the same floor across a 1,500 sq ft home is $6,350–$19,100, a lower rate per foot. Angled walls, closets and many doorways add cuts and transitions.

Subfloor condition

Flat and dry is free; soft, uneven or damp costs money. Subfloor repair is $3–$11 a square foot, and a slab that fails a moisture test needs a vapor barrier before any wood or laminate goes down.

Old flooring removal

$1–$4 a square foot in Tacoma. Carpet is quick; glued vinyl and tile take longest. Floating LVP can sometimes go over an old hard floor and skip this line.

Local rules

Washington requires contractors to register with the state Department of Labor & Industries and carry a bond and insurance. Verify the registration online before a Tacoma crew starts. A floor-covering swap is finish work and needs no permit.

Labor rates in Tacoma

Labor is 40–60% of an installed floor. Tacoma is a mid-size market, so the 500 sq ft LVP job is about 6% above the US typical of $3,500; refinishing, which is four-fifths labor, moves the most with local wages.

Stairs and extras

Carpeting a flight of 13 stairs is $325–$910; wood or LVP treads $845–$3,450. Baseboards add $5–$11 a linear foot and furniture moving $30–$140 a room.

How to Save Money on Flooring in Tacoma
  1. Check what is under the carpet.Older homes often hide solid hardwood under carpet; look before you buy. Refinishing it costs $3–$9 a square foot against $8–$25 for new wood.
  2. Buy the flooring yourself, pay for labor only.Labor to lay a floating floor you bought is $2–$6 a square foot. Big-box stores sell mid-grade LVP for $3–$6 a foot, and often run free or flat-rate basic carpet installs.
  3. Do the removal and furniture.Pulling old carpet yourself saves $1–$4 a square foot, and clearing rooms saves $30–$140 a room. Leave old vinyl tile alone unless it has been tested for asbestos.
  4. Do the whole floor at once.One 1,500 sq ft job ($6,350–$19,100 in LVP) costs less per foot than three rooms on three visits, each with its own minimum charge and transitions.
  5. Get an itemized quote.Product name and wear layer, square feet with waste, removal, subfloor repair rate, stairs, trim and warranty should each be a line. Be wary of a low per-foot price that leaves half of them out.
  6. Pick the material for the room, not the catalog.Carpet at $3–$10 a foot is fine in bedrooms; LVP at $4–$13 in kitchens and basements; save hardwood at $8–$25 for the rooms buyers see.
Flooring Cost in Tacoma: What the Quote Should Include

Tacoma flooring installers often quote a single number per square foot. Before you pay a deposit, get these in writing:

  • The product: brand, line, thickness and wear layer (mils) or carpet face weight
  • Square feet measured, with the waste allowance (usually 10%) shown
  • Removal and disposal of the old floor, priced or marked included
  • Subfloor repair or leveling rate per square foot, and who decides
  • Underlayment or vapor barrier and whether it is in the price
  • Stairs, transitions, baseboards and shoe molding as their own lines
  • Furniture moving and appliance disconnects
  • Warranty on labor and on the product, and the install start and finish dates
Frequently asked questions — Flooring cost in Tacoma
How much does flooring cost in Tacoma?

$2,100–$6,350 to install 500 sq ft of luxury vinyl plank, materials and labor, and $3,700 is typical. Per square foot: LVP $4–$13, carpet $3–$10, solid hardwood $8–$25.

How much is LVP flooring per square foot in Tacoma?

$4–$13 installed, about $7 typical. Rigid-core SPC or WPC plank runs $5–$14; the plank alone is $2–$10 a foot at retail.

How much does it cost to install hardwood floors in Tacoma?

$8–$25 a square foot for solid hardwood and $7–$20 for engineered, installed. A 500 sq ft room is $4,000–$12,500 in solid wood; a 2,000 sq ft home $16,900–$52,750.

How much does carpet installation cost in Tacoma?

$3–$10 a square foot with pad, installed. A 12×12 bedroom is $450–$1,500, a flight of 13 stairs $325–$910, and a 3-bedroom home $4,700–$15,650.

How much does it cost to refinish hardwood floors in Tacoma?

$3–$9 a square foot to sand, stain and finish, or $1,650–$4,400 for 500 sq ft. About four-fifths of that is labor, so it moves with Tacoma wages more than any other line.

What does it cost to remove old flooring in Tacoma?

$1–$4 a square foot, or $500–$2,000 for 500 sq ft. Carpet is the cheapest to pull; glued-down vinyl and tile the dearest. Many carpet installers include removal.

Do I need a permit to replace flooring?

Usually not. Most cities follow the model residential code, which exempts carpeting, tiling and similar finish work from permits. Replacing structural subfloor or joists can need one, so ask the installer who is pulling it.

Is LVP or laminate cheaper?

They overlap. Laminate is $4–$12 a square foot installed in Tacoma and LVP $4–$13. Laminate is often cheaper to buy; LVP is waterproof, so it wins in kitchens, baths and basements.

How long does flooring installation take?

A 12×12 room in LVP, laminate or carpet is half a day to a day. A 500 sq ft open area is 1–2 days, a 1,500 sq ft home 3–5 days, and hardwood or refinishing adds drying time. Wood and plank should sit in the house a few days first.

What's included in a Tacoma flooring quote?

The product, labor, underlayment where needed and transitions. Often extra: removal ($1–$4 a square foot), subfloor repair ($3–$11), stairs ($65–$265 a step in wood) and furniture moving ($30–$140 a room).

Prices verified November 2026 · Cross-referenced against 84+ American pricing sources · See methodology

Prices for the Tacoma metro area, November 2026. Outer suburbs may vary.

Our methodology
These are independent estimates built from public cost guides, retailer and installer price pages, flooring-industry data and federal wage data. No flooring company can pay to change them, so always get a couple of quotes. Last reviewed November 2026. Read our full methodology →

Get a fair flooring quote in Tacoma

Local flooring installers · Free quotes · No obligation, no spam.

Get quotes in Tacoma →Max 2 flooring installers will contact you
Get quotes in TacomaMax 2 flooring installers · free · no spam→