Skip to content
Independent United States Cost GuidesPrices verified November 2026 · 39 trades · 195 US cities · 221+ sources For pros →
Get a fair quote

Cost guides

Plumbing & water4 trades
Electrical & energy5 trades
Renovation8 trades
Structural7 trades
Outdoor & yard7 trades
Cleaning & maintenance8 trades

More

Get a fair quote
Cost guide

How much does a general contractor cost in Tacoma?

By Our research team · Last verified · Methodology

Updated November 2026Independently researched12 min read
General contractor cost

General contractor costs in Tacoma

Tacoma, WAChange location
Get free quotesFree · no obligation · max 2 pros
Normal range for Tacoma, WA
$5,500–$10,600per $50k project

Most general contractors in Tacoma charge $5,500–$10,600 to run a $50,000 remodel a 11–21.2% fee on the project, and $8,250 is what most homeowners here pay. Hourly, GCs bill $60–$165; a whole-house renovation of 2,000 sq ft is $57,500–$217,500.

How we get this data
Typical
$8,250
Low end
$4,400
High end
$13,700
Fee on a $50,000 remodel
$5,500–$10,600
Room addition, 400 sq ft
$57,500–$108,500
Kitchen remodel, mid-range
$28,500–$70,500
New build, per sq ft
$150–$270

Want an exact price for your job?

Tell us the job. Casey checks it by text, then up to 2 local general contractors send you a real quote. Free, no obligation.

Get my fair quote →
Typical general contractor price: Tacoma vs nearby citiesTypical price, per $50k project. The line marks the US typical.
Seattle, WA $8,600
Tacoma, WAThis guide $8,250
Portland, OR $8,200
Salem, OR $7,700
Spokane, WA $7,550
Eugene, OR $7,500
Boise, ID $7,200

The typical Tacoma price is $8,250, 10% above the US typical of $7,500.

Where Tacoma sits among 195 US metrosNumber of metros at each typical general contractor price, per $50k project.

Tacoma's price band

Tacoma is pricier than 95% of the 195 US metros we price for general contractor work.

Expect a general contractor's fee of $5,500–$10,600 on a $50,000 remodel in Tacoma, 11% to 21.2% of the project, with $8,250 the going rate. The fee scales with the job: $16,500–$32,000 on a $150,000 addition and $44,000–$85,000 to build a $400,000 house. New construction here runs about $150–$270 a square foot before land.

Tacoma is a mid-size market. A GC's fee on a $50,000 remodel here is about 10% above the US typical of $7,500, and the whole project moves with it: the subs' wages, the permit fees and the cost of getting materials to the site all run about 10% above the national figure.

Washington registers contractors rather than testing them, so ask for the registration number, the bond on file and proof of liability and workers' comp insurance. This is general information, not legal advice.

Comparing cities, or after the US-wide picture? See the national guide: General contractor cost in the USA.

Quick answer

$5,500–$10,600 — typically $8,250 — is what a general contractor charges to run a $50,000 remodel in Tacoma, a 11–21.2% fee on top of labor and materials. A 400 sq ft addition runs $57,500–$108,500 all in, a mid-range kitchen $28,500–$70,500, and new construction $150–$270 a square foot. Verified November 2026. Get free Tacoma quotes →

  • GC fee on a $50,000 remodel: $5,500–$10,600 ($8,250 typical, 16.5%)
  • Hourly $60–$165; day rate $360–$560; construction manager $2,750–$7,950
  • Room addition, 400 sq ft: $57,500–$108,500; second story $137,500–$326,000
  • Kitchen $28,500–$70,500; bath $9,750–$26,000; basement finish $25,000–$54,500
  • New construction $150–$270 per sq ft; whole-house renovation $57,500–$217,500

Prices verified November 2026 · Cross-referenced against 23+ American pricing sources · See methodology

Detailed pricing — General contractor cost in Tacoma 2026

Fee rows are the GC's charge on a project of that size; project rows are the whole job with the GC's fee included. Tacoma metro, re-verified November 2026. Permits, engineering and change orders are their own rows.

ServiceLowTypicalHigh
General contractor fee on a $50,000 remodel (10–20% of the project)per $50k project$5,500per $50k project$8,250$10,600
General contractor fee on a $150,000 addition or major remodelper $150k project$16,500per $150k project$25,000$32,000
General contractor fee to build a $400,000 houseper $400k build$44,000per $400k build$66,000$85,000
General contractor hourly rate (consulting, small jobs)/hr$60/hr$90$165
General contractor day rate (working on your site)per day$360per day$480$560
Project management only (construction manager) on a $50,000 jobper $50k project$2,750per $50k project$5,500$7,950
Change order: a $5,000 mid-project change (markup plus admin fee)per change$6,050per change$6,600$7,400
Building permit and plans for a remodel or additionper project$2,000per project$5,300$10,500
Structural inspection and written reportper job$345per job$635$1,100
Minor structural repair (header or lintel, crack stitching, wall ties)per job$1,400per job$2,900$5,450
Remove a load-bearing wall and install a beam (single story)per job$3,450per job$8,100$16,400
Deck build, about 200 sq ft, run by a general contractorper project$5,150per project$9,150$16,300
Covered patio or porch addition, about 200 sq ftper project$9,150per project$18,350$32,500
Detached two-car garage, built from the slab upper project$23,000per project$34,500$54,500
Basement finish, about 1,000 sq ftper project$25,000per project$40,000$54,500
Bathroom remodel, mid-range 5 × 8 ft, run by a general contractorper project$9,750per project$16,600$26,000
Kitchen remodel, mid-range, run by a general contractorper project$28,500per project$45,500$70,500
Home addition, building out, per sq ftper sq ft$115per sq ft$200$270
Room addition, 20 × 20 ft (400 sq ft), finishedper project$57,500per project$86,000$108,500
Full second-story additionper project$137,500per project$200,500$326,000
Detached ADU, 600 sq ft one-bedroom, turnkeyper unit$137,500per unit$206,000$326,000
Whole-house renovation, 2,000 sq ft (kitchen, baths, floors, paint, systems)per project$57,500per project$131,500$217,500
New home construction, per sq ft (standard finish, no land)per sq ft$150per sq ft$190$270
Tear down and rebuild a 2,000 sq ft houseper project$286,500per project$401,000$598,000
Bigger general contractor jobs in Tacoma: what they costPer project, low to high with the typical price marked. Every line is in the table above.
Tear down and rebuild a 2,000 sq ft house $401,000$286K–$598K
Full second-story addition $200,500$138K–$326K
Whole-house renovation, 2,000 sq ft (kitchen, baths, floors, paint, systems) $131,500$57.5K–$218K
Room addition, 20 × 20 ft (400 sq ft), finished $86,000$57.5K–$108K
Smaller general contractor jobs and repairs in TacomaPer project, low to high with the typical price marked. Every line is in the table above.
Kitchen remodel, mid-range, run by a general contractor $45,500$28.5K–$70.5K
Basement finish, about 1,000 sq ft $40,000$25K–$54.5K
Detached two-car garage, built from the slab up $34,500$23K–$54.5K
Covered patio or porch addition, about 200 sq ft $18,350$9,150–$32.5K
Bathroom remodel, mid-range 5 × 8 ft, run by a general contractor $16,600$9,750–$26K
Deck build, about 200 sq ft, run by a general contractor $9,150$5,150–$16.3K
Building permit and plans for a remodel or addition $5,300$2,000–$10.5K
Already got a quote?
Check it against these Tacoma prices — free, no sign-up.
$

Got it as a PDF or photo? Upload up to 3 quotes and compare →

Free quotes

Get free quotes from up to 2 local general contractors in Tacoma

Free · No obligation · About a minute

  1. 1The job
  2. 2Budget
  3. 3Your details
Casey · LocalGoingRate

What are you planning to build or remodel?

Tap one to start.

Prices verified November 2026 · Cross-referenced against 23+ American pricing sources · See methodology

Figures are for the Tacoma metro area. Travel is built into bids on the far edges; permit times and access in Downtown Tacoma & Stadium District push fees to the top of the range.

How general contractor costs vary across Tacoma

General contractor prices across Tacoma

Same job, four price bands. Parking, permits and old buildings push Downtown Tacoma & Stadium District to the top, and fees in Puyallup, Federal Way & Olympia price near the city typical, with bigger projects.

General contractor prices across TacomaTypical range by part of the metro, per $50k project. The line marks the Tacoma typical.
Downtown Tacoma & Stadium District8–15% above the city average $5,950–$12.2Kper $50k project
Hilltop & South TacomaStandard to 8% above $5,650–$11.4Kper $50k project
Eastside & LakewoodStandard pricing $5,500–$10.6Kper $50k project
Puyallup, Federal Way & OlympiaStandard; bigger additions and new builds $5,500–$11Kper $50k project

Downtown Tacoma & Stadium District

8–15% above the city average
Downtown, Stadium District, Hilltop
Fee on a $50k job
$5,950–$12,200 per $50k project
400 sq ft addition
$62,000–$125,000 / 400 sq ft addition

Dense blocks with a lot of older housing, so structural surprises (undersized framing, old wiring, plaster) are common. Carry a bigger contingency and expect fees near the top of the range.

Hilltop & South Tacoma

Standard to 8% above
Hilltop, South Tacoma, South End
Fee on a $50k job
$5,650–$11,450 per $50k project
400 sq ft addition
$59,000–$117,000 / 400 sq ft addition

Lots of fix-and-flip and whole-house renovations. Bids vary widely; get three, and compare the allowances and exclusions line by line, not the bottom line.

Eastside & Lakewood

Standard pricing
Eastside, Lakewood, Parkland
Fee on a $50k job
$5,500–$10,600 per $50k project
400 sq ft addition
$57,500–$108,500 / 400 sq ft addition

Residential streets with average pricing. Bundling two projects (a kitchen and a bath, say) under one contract saves a second round of mobilization and fees.

Puyallup, Federal Way & Olympia

Standard; bigger additions and new builds
Puyallup, Federal Way, University Place, Olympia
Fee on a $50k job
$5,500–$11,000 per $50k project
400 sq ft addition
$57,500–$113,000 / 400 sq ft addition

Mostly single-family homes on bigger lots, so additions, second stories, garages and basement finishes are the common jobs. Easy access keeps fees near the city average, but the projects themselves are bigger.

What you'll actually pay — job by job

Real-World General Contractor Costs in Tacoma

Here's what common general contractor jobs cost in Tacoma in 2026, the GC's fee on a $50,000 remodel; subs and materials are the other $42,500 or so.

GC fee on a $50,000 kitchen-and-bath remodel — 6 to 10 weeks

$5,500–$8,250

The GC bids the job, lines up the demo crew, plumber, electrician, tile setter and painter, pulls the permit and meets the inspector. Most Tacoma homeowners pay about $8,250 (16.5%) for that; a structural change or a co-op board pushes the fee toward $10,600.

Remove a load-bearing wall for an open kitchen — 3 to 5 days

$3,450–$16,400

A structural engineer sizes the beam ($345–$1,100 for the report), the GC shores the ceiling, cuts the wall, sets the beam and patches the floor and ceiling. $3,450–$16,400 in Tacoma for a single-story wall; a two-story wall or a hidden flush beam costs more.

400 sq ft room addition, finished — 3 to 5 months

$57,500–$108,500

Foundation, framing, roof tie-in, windows, electrical, HVAC extension, drywall, flooring and paint. $57,500–$108,500 all in, of which the GC's fee is about $12,900 at 16.5%. Permits and drawings ($2,000–$10,500) come first and take 4 to 12 weeks in most cities.

Detached two-car garage from the slab up — 4 to 8 weeks

$23,000–$54,500

Slab, framing, roof, siding, one overhead door and a basic electrical panel. $23,000–$54,500 in Tacoma; finishing the inside, a second story or an ADU conversion is a different project.

Whole-house renovation of a 2,000 sq ft home — 4 to 8 months

$57,500–$217,500

Kitchen, two baths, floors, paint, and the electrical and plumbing the inspector insists on once walls are open. $57,500–$217,500 in Tacoma, GC fee included; a full gut to the studs runs $137,500–$343,500.

How much does a general contractor cost in Tacoma?

Between $5,500 and $10,600 on a $50,000 remodel, and $8,250 is the fee most Tacoma homeowners pay. The fee is 11% to 21.2% of the project and it buys the GC's time: bidding, hiring and scheduling the subs, pulling permits, meeting inspectors and carrying the insurance and the warranty.

Change orders are where the fee grows: a $5,000 mid-project change costs $6,050–$7,400 once the GC's markup and admin fee are added. Permits and drawings for an addition run $2,000–$10,500 before anyone picks up a hammer. Figures re-checked against 23 sources in November 2026.

General contractor prices in Tacoma (2026): fees, remodels, additions and new builds

The GC's fee on a $50,000 remodel is $5,500–$10,600, a 400 sq ft addition $57,500–$108,500, and new construction $150–$270 a square foot.

Line on the quoteLowTypicalHigh
GC fee on a $50,000 remodel$5,500$8,250$10,600
GC fee on a $150,000 addition$16,500$25,000$32,000
GC hourly rate$60$90$165
Kitchen remodel, mid-range$28,500$45,500$70,500
Room addition, 400 sq ft$57,500$86,000$108,500
Full second-story addition$137,500$200,500$326,000
Whole-house renovation, 2,000 sq ft$57,500$131,500$217,500
New home construction, per sq ft$150$190$270

Percentage or lump sum, the money is the same in Tacoma: $8,250 on a $50,000 job is a 16.5% fee. Ask for the fee as a number and as a percentage, and ask what it covers; a bid that hides the fee inside the sub prices is harder to compare.

What moves a general contractor's quote in Tacoma:

  • Project size and complexity — the fee is 11–21.2% of the job, so $5,500–$10,600 on $50,000 and $16,500–$32,000 on $150,000. Structural work, tight sites and many subs push the percentage up.
  • Contract type — cost-plus shows the fee; a fixed bid buries it and adds a cushion for risk. Either way, expect $8,250 typical on a $50,000 scope.
  • Permits and drawings — $2,000–$10,500 for a remodel or addition before work starts, and 4 to 12 weeks of waiting in most cities.
  • Change orders — a $5,000 mid-project change costs $6,050–$7,400 once markup and an admin fee are added. Lock the design before you sign.
  • The age of the house — once walls are open, inspectors in Tacoma can require wiring, plumbing and framing brought up to code. Carry a 10–20% contingency on anything built before 1980.

Ask every Tacoma general contractor the same five things: the fee as a percentage and a dollar figure, what allowances are in the bid, who pulls the permit, how change orders are priced, and the payment schedule tied to milestones. Compare those, not the headline price. Get a quote for your project →

General Contractor Cost in Tacoma by Project Size

Quick answer

$50,000 remodel: GC fee $5,500–$10,600. $150,000 addition: $16,500–$32,000. $400,000 new house: $44,000–$85,000. The whole project, GC included, runs $57,500–$108,500 for a 400 sq ft addition, $137,500–$326,000 for a full second story and $286,500–$598,000 to tear down and rebuild 2,000 sq ft.

Worked example: a Tacoma 400 sq ft room addition at $86,000 typical. The GC's 16.5% is about $12,900; permits and drawings add $5,300; a structural engineer's report $635. Carry a 10% contingency ($8,600) for what the crew finds under the siding, and the realistic budget is about $100,535.

Going up costs more than going out. A full second story is $200,500 typical against $86,000 for a 400 sq ft addition on the ground, because the roof comes off, the first floor is shored and you live elsewhere for months. Per square foot, building out is $115–$270 and building up $230–$575.

Tacoma General Contractor Costs by Contract and Job Type

Contract or job typeCostBest for
Cost-plus GC (fee as a percentage)$5,500–$10,600 fee on a $50,000 jobYou pay the real cost of labor and materials plus the GC's fee, about 16.5% here. Fair when the scope is still moving; set a not-to-exceed cap.
Fixed-price (lump sum) GC bid$5,500–$10,600 fee inside a $50,000 jobOne price for the whole job with the fee and a risk cushion folded in. Best when drawings and finishes are locked and three GCs bid the same plans.
Construction manager (project management only)$2,750–$7,950 fee on a $50,000 jobYou hire the subs; the manager schedules and inspects. About half a GC's fee, but the contracts and the risk stay with you.
Hourly or day rate$60–$165/hrSmall jobs, repairs and consulting, or $360–$560 a day for a GC working on site. Project work is quoted as a price instead.
Bathroom remodel, mid-range (GC-run)$9,750–$26,000 per projectThe most common GC job. The GC's share is the same 10–20%; the rest is the plumber, tile setter, fixtures and finishes.
Kitchen remodel, mid-range (GC-run)$28,500–$70,500 per projectCabinets, counters, floors, lighting and the trades to fit them. Layout changes and moved plumbing push it to the top.
Basement finish, 1,000 sq ft$25,000–$54,500 per projectThe cheapest way to add living space: the shell exists. A bathroom, egress window or wet bar adds to it.
Room addition, 400 sq ft (building out)$57,500–$108,500 per projectNew footprint on the lot: foundation, framing, roof tie-in, systems and finishes at $115–$270 a square foot.
Full second-story addition (building up)$137,500–$326,000 per projectRoof off, new floor on. About twice the cost per square foot of building out, and you usually move out for months.
Whole-house renovation, 2,000 sq ft$57,500–$217,500 per projectKitchen, baths, floors, paint and systems in one contract. Cheaper per room than doing them one at a time.
Detached two-car garage$23,000–$54,500 per projectA shell on a slab with a door and basic power. Finishing the inside or adding a room above is a different project.
Detached ADU, 600 sq ft turnkey$137,500–$326,000 per projectA small house with a kitchen and bath, plus its own utility connections and permits. Rentable where zoning allows.
New home, 2,000 sq ft (construction only)$300,000–$540,000 per projectThe GC is the builder, at $150–$270 a square foot. Land, design, permits and utility hookups sit on top.
Structural work: remove a bearing wall$3,450–$16,400 per projectJobs that need a structural engineer's report and a permit. The GC coordinates the engineering, the framer and the inspector.
Cost by contract or job type in TacomaTypical range, per project.
Bathroom remodel, mid-range (GC-run) $9,750–$26Kper project
Kitchen remodel, mid-range (GC-run) $28.5K–$70.5Kper project
Basement finish, 1,000 sq ft $25K–$54.5Kper project
Room addition, 400 sq ft (building out) $57.5K–$108Kper project
Full second-story addition (building up) $138K–$326Kper project
Whole-house renovation, 2,000 sq ft $57.5K–$218Kper project
Detached two-car garage $23K–$54.5Kper project
Detached ADU, 600 sq ft turnkey $138K–$326Kper project
New home, 2,000 sq ft (construction only) $300K–$540Kper project
Structural work: remove a bearing wall $3,450–$16.4Kper project
Tacoma tip: tie payments to milestones (foundation, framing, rough-in, finish), not to dates, and never pay more than 20% up front.

The fee vs. the project — what a Tacoma general contractor bill really covers

On a $50,000 remodel in Tacoma, the general contractor keeps about $8,250 — the 16.5% fee. The other $41,750 pays the demo crew, plumber, electrician, framer, drywaller, tile setter and painter, the materials, the dumpster and the permit. A GC who bids the whole job at $50,000 fixed price is carrying that same fee inside the number.

The fee is what you pay for one person to own the schedule, the subs and the problems. Owner-managing the same job with a construction manager costs $2,750–$7,950 and saves about $2,750 at the typical price, but every late sub, failed inspection and material shortage becomes your afternoon off work.

What's included in a Tacoma general contractor quote (and what costs extra)

A GC's fee covers bidding and hiring the subs, scheduling, supervision, permit coordination, insurance and the warranty on the work. The headline bid often leaves out:

  • Permits and drawings — $2,000–$10,500 for a remodel or addition, often billed as a pass-through
  • Engineering — $345–$1,100 for a structural report on any bearing wall or addition
  • Change orders — $6,050–$7,400 on a $5,000 change once markup and admin fees are added
  • Allowance overruns — finishes above the allowance in the bid, plus the GC's 7.5–20% materials markup

Ask for the fee, the allowances, the exclusions and the payment schedule in writing, and for proof of liability insurance and workers' comp.

What Affects General Contractor Costs in Tacoma

Project size

The fee scales with the job: $5,500–$10,600 on $50,000, $16,500–$32,000 on $150,000, $44,000–$85,000 on a $400,000 house. The percentage is roughly constant, so a bigger project is a bigger fee in dollars.

Contract type

Cost-plus states the fee (11–21.2% here). A fixed-price bid folds it in and adds a cushion for things that might go wrong. Time-and-materials bills $60–$165 an hour plus costs and suits small or open-ended jobs.

Structural work and permits

Anything that needs a structural engineer's report ($345–$1,100) and a building permit ($2,000–$10,500 with drawings) adds coordination the GC charges for. Removing a bearing wall runs $3,450–$16,400 in Tacoma.

Change orders

A $5,000 change mid-project costs $6,050–$7,400 once the GC's markup and admin fee are added. Finishes chosen after the contract is signed are the most common cause.

Local rules and licensing

Washington registers contractors rather than testing them, so ask for the registration number, the bond on file and proof of liability and workers' comp insurance.

Labor rates in Tacoma

Construction supervisors in the Seattle-Tacoma-Bellevue metro earn a median $121,130 a year in federal wage data, about 52% above the US median. Labor is 40% to 60% of a remodel or addition, so Tacoma projects land about 10% above the US typical.

Season and schedule

Spring and summer are the busy months for additions, garages and anything with a foundation, so bids run higher and start dates slip. Interior remodels fill the winter, when some Tacoma GCs sharpen their fee to keep crews working.

How to Save Money on a General Contractor in Tacoma
  1. Lock the design and finishes before you sign.Every change after the contract costs $6,050–$7,400 on a $5,000 item once the markup and admin fee land. Pick the tile, the fixtures and the cabinets first.
  2. Get three itemized bids on the same drawings.Two Tacoma bids can differ by $2,750 in fee alone on a $50,000 job. Make all three price the same plans, with allowances and exclusions listed.
  3. Bundle projects into one contract.A kitchen and a bath under one GC share one mobilization, one permit visit and one fee negotiation. A 2,000 sq ft whole-house renovation ($57,500–$217,500) costs less per room than the rooms done one at a time.
  4. Keep the footprint and the roofline.Building out costs $115–$270 a square foot; building up costs about twice that ($137,500–$326,000 for a full second story). A bump-out or a basement finish ($25,000–$54,500) is cheaper than either.
  5. Ask about an off-season start.Interior work in winter is slower for most Tacoma GCs, and a start date in January or February can bring the fee down a point or two.
  6. Check the license, insurance and references before the deposit.A deposit above 20% is a warning sign, and an uninsured GC is a risk you carry. The checks are free; a bad GC costs the whole budget.
General Contractor Cost in Tacoma: What the Quote Should Include

Tacoma general contractors quote cost-plus, fixed-price or time-and-materials. Before you pay a deposit, get these in writing:

  • The GC's fee as a percentage and a dollar figure, and what it covers
  • Every allowance (cabinets, tile, fixtures, flooring) with its dollar amount
  • Exclusions: permits, engineering, dumpster, utility connections, landscaping
  • How change orders are priced: markup percentage and any admin fee
  • Who pulls the permit and who meets the inspector
  • A payment schedule tied to milestones, with the deposit capped
  • The license or registration number where your state has one, plus liability and workers' comp certificates
  • Start and finish dates, the warranty on the work, and lien releases from subs at each payment
Frequently asked questions — General contractor cost in Tacoma
How much does a general contractor cost in Tacoma?

$5,500–$10,600 (typically $8,250 here) to run a $50,000 remodel — a fee of 11% to 21.2% on top of labor and materials. On a $150,000 addition the fee is $16,500–$32,000.

What percentage do general contractors charge in Tacoma?

About 11% to 21.2% of the project cost, 16.5% typical, whether it is shown as a cost-plus fee or folded into a fixed bid. Small or complex jobs run toward the top; large simple ones toward the bottom.

How much do general contractors charge per hour in Tacoma?

$60–$165 an hour for consulting and small jobs, or $360–$560 a day for a GC working on your site. Remodels, additions and new builds are quoted as a project price instead.

How much does a home addition cost in Tacoma?

$57,500–$108,500 for a finished 400 sq ft room addition, about $115–$270 a square foot building out. A full second story runs $137,500–$326,000.

How much does it cost to build a house in Tacoma?

About $150–$270 a square foot for construction at a standard finish, so $300,000–$540,000 for a 2,000 sq ft house before land, design and utility connections. Tearing down an old house and rebuilding 2,000 sq ft is $286,500–$598,000.

How much does a whole-house renovation cost in Tacoma?

$57,500–$217,500 for a 2,000 sq ft home: kitchen, baths, floors, paint and the systems work the inspector requires, GC fee included. A full gut to the studs costs more.

Do I need a licensed general contractor in Washington?

Washington registers contractors rather than testing them, so ask for the registration number, the bond on file and proof of liability and workers' comp insurance.

Is cost-plus or a fixed price better?

Cost-plus shows the fee (11–21.2% here) and suits a scope that is still moving; cap it with a not-to-exceed figure. A fixed price suits locked drawings and finishes; the GC carries the risk and prices a cushion for it. Either way the fee on a $50,000 job is about $8,250.

How much should I pay a general contractor up front?

No more than 10–20% as a deposit, then payments tied to milestones. Some states cap it: California limits the deposit to 10% or $1,000, whichever is less. A GC asking for half up front is a warning sign.

What's included in a Tacoma general contractor quote?

The fee, the subs' labor, the materials in the allowances and the dumpster. Often extra: permits and drawings ($2,000–$10,500), engineering ($345–$1,100), change orders ($6,050–$7,400 on a $5,000 change) and anything above an allowance.

Prices verified November 2026 · Cross-referenced against 23+ American pricing sources · See methodology

Prices for the Tacoma metro area, November 2026. Outer suburbs may vary.

Our methodology
These are independent estimates built from public cost guides, builder-platform data, the NAHB construction cost survey, dated city price pages, licensing boards and federal wage data. No contractor can pay to change them, so always get three bids. Last reviewed November 2026. Read our full methodology →

Get a fair general contractor quote in Tacoma

Local general contractors · Free quotes · No obligation, no spam.

Get quotes in Tacoma →Max 2 general contractors will contact you
Get quotes in TacomaMax 2 general contractors · free · no spam→