Skip to content
Independent United States Cost GuidesPrices verified November 2026 · 39 trades · 195 US cities · 221+ sources For pros →
Get a fair quote

Cost guides

Plumbing & water4 trades
Electrical & energy5 trades
Renovation8 trades
Structural7 trades
Outdoor & yard7 trades
Cleaning & maintenance8 trades

More

Get a fair quote
Cost guide

How much does tile installation cost in Bakersfield?

By Our research team · Last verified · Methodology

Updated November 2026Independently researched11 min read
Tile installation cost

Tile installation costs in Bakersfield

Bakersfield, CAChange location
Get free quotesFree · no obligation · max 2 pros
Normal range for Bakersfield, CA
$1,000–$2,500per 100 sq ft

Tiling a 100 sq ft bathroom floor in Bakersfield costs $1,000–$2,500 and $1,600 is what most homeowners pay, tile included. Labor alone is $5–$14 per sq ft; a tiled shower is $1,500–$5,000.

How we get this data
Typical
$1,600
Low end
$500
High end
$5,000
100 sq ft floor
$1,000–$2,500
Installed per sq ft
$10–$25
Tile a shower
$1,500–$5,000
Backsplash
$500–$1,400

Want an exact price for your job?

Tell us the job. Casey checks it by text, then up to 2 local tile setters send you a real quote. Free, no obligation.

Get my fair quote →
Typical tile installation price: Bakersfield vs nearby citiesTypical price, per 100 sq ft. The line marks the US typical.
Visalia, CA $1,700
Bakersfield, CAThis guide $1,600
Oxnard, CA $1,600
Fresno, CA $1,600

The typical Bakersfield price is $1,600, in line with the US typical of $1,600.

Where Bakersfield sits among 195 US metrosNumber of metros at each typical tile installation price, per 100 sq ft.

Bakersfield's price band

Bakersfield is pricier than 56% of the 195 US metros we price for tile installation work.

Installing floor tile on a 100 sq ft bathroom floor in Bakersfield costs $1,000–$2,500 with standard ceramic or porcelain, and $1,600 is typical — about $16 per square foot for tile, setting materials and labor. Labor alone runs $5–$14 per sq ft, and the other common jobs are priced by the job: $1,500–$5,000 to tile a shower and $500–$1,400 for a kitchen backsplash.

Bakersfield's slab-built homes keep floor prep simple. Federal data don't publish a Bakersfield figure for tile and stone setters; the California median is $58,880.

In California, tile work over $1,000 (labor and materials together) needs a contractor licensed by the CSLB — the C-54 Ceramic and Mosaic Tile classification covers it — and so does any smaller job that needs a permit or a hired helper. The $1,000 line took effect January 1, 2025. Floor tile and backsplashes rarely need a permit; moving shower plumbing does. General information, not legal advice.

Comparing cities, or after the US-wide picture? See the national guide: Tile installation cost in the USA.

Quick answer

$1,000–$2,500 to tile a 100 sq ft bathroom floor in Bakersfield with standard ceramic or porcelain — typically $1,600 — about $16 per square foot installed. A tiled shower runs $1,500–$5,000. Verified November 2026. Get free Bakersfield quotes →

  • 100 sq ft bathroom floor, standard tile: $1,000–$2,500 ($1,600 typical)
  • Installed $10–$25 per sq ft; labor only $5–$14 per sq ft
  • Tile a shower $1,500–$5,000; kitchen backsplash $500–$1,400
  • Tile removal $2–$7 per sq ft; waterproofing $3–$8 per sq ft
  • Hourly rate $45–$110; minimum charge $355–$755

Prices verified November 2026 · Cross-referenced against 77+ American pricing sources · See methodology

Detailed pricing — Tile installation cost in Bakersfield 2026

Labor and setting materials included unless the row says otherwise; tile supply rows are the tile alone. Bakersfield metro, re-verified November 2026. Demolition, leveling and waterproofing are separate lines.

ServiceLowTypicalHigh
Floor tile, 100 sq ft bathroom floor — standard ceramic or porcelain (tile + labor)per 100 sq ft$1,000per 100 sq ft$1,600$2,500
Floor tile installed, standard ceramic or porcelain (tile + labor)per sq ft$10per sq ft$16$25
Floor tile installation, standard 12×12 to 12×24 (labor only)per sq ft$5per sq ft$9$14
Large-format floor tile, 24×24 and bigger (labor only)per sq ft$9per sq ft$12$16
Wall tile, standard (labor only)per sq ft$8per sq ft$12$20
Mosaic or feature tile (labor only)per sq ft$12per sq ft$18$30
Natural stone tile — marble, travertine, limestone (labor only)per sq ft$10per sq ft$15$22
Outdoor or patio tile, porcelain pavers on a slab (labor only)per sq ft$7per sq ft$12$20
Full bathroom, 60 sq ft floor + 140 sq ft walls (labor only)per bathroom$1,400per bathroom$2,200$3,650
Tile removal and disposalper sq ft$2per sq ft$4$7
Waterproofing membrane, showers and wet areas (installed)per sq ft$3per sq ft$5$8
Floor leveling and prep (self-leveling underlayment)per sq ft$2per sq ft$3$6
Tile setter hourly rateper hour$45per hour$75$110
Tile setter day rate (8 hours)per day$360per day$600$880
Tile supply, budget ceramicper sq ft$1per sq ft$2$4
Tile supply, mid-range porcelainper sq ft$3per sq ft$5$9
Tile supply, large-format porcelain (24×24, 24×48)per sq ft$2per sq ft$5$12
Tile supply, outdoor slip-resistant porcelain paversper sq ft$4per sq ft$8$15
Tile supply, mosaic sheets (ceramic, porcelain, glass, stone)per sq ft$4per sq ft$10$30
Tile supply, subway or backsplash ceramicper sq ft$2per sq ft$4$10
Tile supply, premium natural stone (marble, travertine, limestone)per sq ft$6per sq ft$12$25
Bathroom tile, 60 sq ft floor + 140 sq ft walls, mid-range porcelain (tile + labor)per bathroom$2,200per bathroom$3,600$6,050
Tile a shower, walls and floor, about 100 sq ft (tile + labor)per shower$1,500per shower$2,700$5,000
Kitchen backsplash, about 30 sq ft, subway tile (tile + labor)per job$500per job$905$1,400
tile installation jobs in Bakersfield: what they costPer sq ft, low to high with the typical price marked. Every line is in the table above.
Mosaic or feature tile (labor only) $18$12–$30
Floor tile installed, standard ceramic or porcelain (tile + labor) $16$10–$25
Natural stone tile — marble, travertine, limestone (labor only) $15$10–$22
Large-format floor tile, 24×24 and bigger (labor only) $12$9–$16
Wall tile, standard (labor only) $12$8–$20
Outdoor or patio tile, porcelain pavers on a slab (labor only) $12$7–$20
Tile supply, premium natural stone (marble, travertine, limestone) $12$6–$25
Tile supply, mosaic sheets (ceramic, porcelain, glass, stone) $10$4–$30
Floor tile installation, standard 12×12 to 12×24 (labor only) $9$5–$14
Tile supply, outdoor slip-resistant porcelain pavers $8$4–$15
Waterproofing membrane, showers and wet areas (installed) $5$3–$8
Tile supply, mid-range porcelain $5$3–$9
Already got a quote?
Check it against these Bakersfield prices — free, no sign-up.
$

Got it as a PDF or photo? Upload up to 3 quotes and compare →

Free quotes

Get free quotes from up to 2 local tile setters in Bakersfield

Free · No obligation · About a minute

  1. 1The job
  2. 2Budget
  3. 3Your details
Casey · LocalGoingRate

What do you want tiled?

Tap one to start.

Prices verified November 2026 · Cross-referenced against 77+ American pricing sources · See methodology

Figures cover the Bakersfield metro area. Older buildings and tight access in Downtown & Oleander push jobs toward the top of each range.

How tile installation costs vary across Bakersfield

Tile installation prices across Bakersfield

Where you live moves the price a little; access and the state of the floor move it more. Downtown & Oleander jobs carry parking and building costs; Southwest & Rosedale sits near or below the city average.

Tile installation prices across BakersfieldTypical range by part of the metro, per 100 sq ft. The line marks the Bakersfield typical.
Downtown & Oleander5–15% above the city average $1,300–$2,250per 100 sq ft
East Bakersfield & LakeviewUp to 10% above average $1,200–$2,150per 100 sq ft
Oildale & the NortheastAround the city average $1,150–$2,050per 100 sq ft
Southwest & RosedaleAround average $1,150–$2,000per 100 sq ft

Downtown & Oleander

5–15% above the city average
Downtown, Oleander, Westchester
Floor tile, 100 sq ft
$1,300–$2,250 per 100 sq ft
Tiled shower
$2,300–$4,250 / tiled shower

Dense blocks, older buildings and paid parking. Condo and co-op boards often want the setter's insurance papers and set work hours, and carrying 50-pound boxes of tile up stairs or into a freight elevator adds a day to the quote.

East Bakersfield & Lakeview

Up to 10% above average
East Bakersfield, Lakeview, Cottonwood
Floor tile, 100 sq ft
$1,200–$2,150 per 100 sq ft
Tiled shower
$2,200–$4,000 / tiled shower

Older homes being updated one room at a time. Expect bigger prep lines — leveling, backer board, new subfloor — than in a newer suburb.

Oildale & the Northeast

Around the city average
Oildale, Northeast Bakersfield
Floor tile, 100 sq ft
$1,150–$2,050 per 100 sq ft
Tiled shower
$2,100–$3,850 / tiled shower

Established streets with a mix of house ages. Most jobs price at the city average; older homes may need extra time for leveling and backer board.

Southwest & Rosedale

Around average
Southwest Bakersfield, Rosedale, Seven Oaks
Floor tile, 100 sq ft
$1,150–$2,000 per 100 sq ft
Tiled shower
$2,050–$3,750 / tiled shower

Mostly single-family streets with easy access and a driveway to set up the saw, so rates sit near the city average.

What you'll actually pay — job by job

Real-world tile installation costs in Bakersfield

Here's what common tile installation jobs cost in Bakersfield in 2026, standard tile, setting materials and labor included.

Small bathroom floor, 40 sq ft of porcelain

$400–$1,000

At $10–$25 per sq ft installed, 40 square feet works out to $400–$1,000, and most Bakersfield setters charge a minimum of $355–$755 whatever the size — so budget $400–$1,000. Pulling the toilet and resetting it is usually included; a new wax ring and supply line are small extras.

Tile a shower, walls and floor, with waterproofing

$1,500–$5,000

A full tiled shower in Bakersfield — about 100 square feet of wall and floor tile over a waterproof membrane — runs $1,500–$5,000. A recessed niche or bench adds $200–$505, for $1,700–$5,500 in all. If the shower valve or drain moves, a plumber's permit and bill are extra.

Kitchen backsplash, about 30 sq ft of subway tile

$500–$1,400

Expect $500–$1,400 for a standard backsplash between the counter and the upper cabinets. The tile itself is only $2–$10 per sq ft; the price is the cutting around outlets and windows. Removing an old tile backsplash first adds $2–$7 per sq ft.

Replace a kitchen floor: tear out 150 sq ft of old tile, level, lay porcelain

$2,100–$5,700

Removal and disposal at $4 a square foot ($300–$1,050), leveling the floor at $3 a foot and new porcelain at $16 a foot installed ($1,500–$3,750) comes to about $3,450 in Bakersfield. Expect two to three days and a lot of dust — ask about dust-free removal ($4–$7 per sq ft).

Full bathroom, floor and walls, with a heated floor

$2,800–$7,600

Tiling a 60 sq ft floor and 140 sq ft of walls in mid-range porcelain is $2,200–$6,050. An electric heating mat under the floor adds $12 a square foot plus $140–$350 for the thermostat, about $850 for a 50 sq ft bathroom, for $2,800–$7,600 in all. The mat needs its own circuit, so an electrician's visit is extra.

How much does tile installation cost in Bakersfield?

Between $1,000 and $2,500 for a 100 sq ft bathroom floor, with most Bakersfield homeowners paying about $1,600. Labor is the bigger half: a setter charges $5–$14 per sq ft to lay standard tile, $9–$16 per sq ft for large-format and $10–$22 per sq ft for natural stone. Standard porcelain itself is only $3–$9 per sq ft.

For big floors, ask for a per-foot price. Bakersfield setters charge about $10–$25 per sq ft installed for standard porcelain and $13–$30 per sq ft for large-format, so a 300 sq ft living area runs $3,900–$9,000, based on 77 sources checked in November 2026.

Lines on a tile quote in Bakersfield (2026)

A 100 sq ft bathroom floor runs $1,000–$2,500, labor alone $5–$14 per sq ft, and most setters charge a $355–$755 minimum on small jobs.

Line on the quoteLowTypicalHigh
Floor tile, 100 sq ft bathroom floor (tile + labor)$1,000$1,600$2,500
Floor tile installed, per sq ft (tile + labor)$10$16$25
Floor tile labor only, per sq ft$5$9$14
Tile setter hourly rate$45$75$110
Minimum charge on small jobs$355$505$755
Tile removal and disposal, per sq ft$2$4$7
Waterproofing membrane, per sq ft$3$5$8
Floor leveling and prep, per sq ft$2$3$6

Per-foot price vs the bill in Bakersfield: $16 a square foot sounds simple, but demolition ($4), leveling ($3) and waterproofing ($5) can add $12 a foot in a wet room. Get those lines in writing.

What moves a tile quote in Bakersfield:

  • The tile — budget ceramic is $1–$4 per sq ft, mid-range porcelain $3–$9 per sq ft, natural stone $6–$25 per sq ft, and stone costs more to set too.
  • Tile size and pattern — large-format runs $9–$16 per sq ft in labor against $5–$14 per sq ft for standard sizes; herringbone, diagonal or mosaic adds 10–30% in time and waste.
  • Prep — tearing out old tile ($2–$7 per sq ft), leveling ($2–$6 per sq ft) and backer board ($5–$8 per sq ft) are separate lines, and they decide whether the job lasts.
  • Wet areas — showers need a waterproof membrane ($3–$8 per sq ft) and a sloped pan ($805–$3,000 tiled), which is why a shower costs $1,500–$5,000.
  • Minimums and access — most setters charge a $355–$755 minimum; stairs, elevators and no place to set up a wet saw add time in Downtown & Oleander.

Ask every Bakersfield tile setter the same four things: the per-foot or flat price, what prep and waterproofing are included, who buys the tile and setting materials, and whether they carry liability insurance. Get a quote for your tile job →

Tile installation cost in Bakersfield by room size

Quick answer

A 40 sq ft bathroom floor is $400–$1,000 (the minimum charge sets it), a 100 sq ft bathroom floor $1,000–$2,500, a 150 sq ft kitchen floor $1,500–$3,750 and a 300 sq ft living area in large-format porcelain $3,900–$9,000.

Worked example: a kitchen floor in Bakersfield. 150 square feet of standard porcelain at $16 a foot installed is about $2,400. Add tear-out of the old tile at $4 a foot ($600) and leveling at $3 a foot, and the job comes to about $3,450.

A whole house of tile floors — 1,500 square feet of porcelain — runs about $13,500–$33,750 in Bakersfield with a 10% volume discount, while a 200 sq ft porcelain-paver patio over a slab is $2,600–$7,000.

Tile types and what each costs installed in Bakersfield

Tile typeCostBest for
Ceramic tile (basic glazed)$8–$20 per sq ft installedBathroom floors and walls on a budget; easy to cut, the cheapest tile to buy and to lay
Porcelain tile (standard 12×12 or 12×24)$10–$25 per sq ft installedKitchens, bathrooms and entries — denser and harder than ceramic, so it takes wear and water without sealing
Large-format porcelain (24×24, 24×48)$13–$30 per sq ft installedOpen living areas and big showers; fewer grout lines, but the floor must be flat and the labor rate is higher
Natural stone (marble, travertine, limestone)$18–$50 per sq ft installedStatement floors and shower walls; needs sealing and a setter who works stone every week
Mosaic and feature tile$18–$60 per sq ft installedShower floors, niches and accent strips — small pieces, slow to set, so labor per foot is the highest
Subway tile (ceramic backsplash and wall tile)$12–$30 per sq ft installedKitchen backsplashes and tub surrounds; cheap tile, moderate labor
Outdoor slip-resistant porcelain pavers$13–$35 per sq ft installedPatios and pool decks over a concrete slab; frost-proof and textured for wet feet
Heated floor add-on (electric mat under the tile)$8–$20 per sq ft addedBathroom floors in cold climates — add $140–$350 for the thermostat hookup
Cost by tile type in BakersfieldTypical range, per sq ft installed.
Ceramic tile (basic glazed) $8–$20per sq ft installed
Porcelain tile (standard 12×12 or 12×24) $10–$25per sq ft installed
Large-format porcelain (24×24, 24×48) $13–$30per sq ft installed
Natural stone (marble, travertine, limestone) $18–$50per sq ft installed
Mosaic and feature tile $18–$60per sq ft installed
Subway tile (ceramic backsplash and wall tile) $12–$30per sq ft installed
Outdoor slip-resistant porcelain pavers $13–$35per sq ft installed
Bakersfield tip: standard porcelain at $10–$25 per sq ft installed is the value pick for floors — harder than ceramic, no sealing, and the cheapest labor rate.

Per-square-foot rate vs what you actually pay — the Bakersfield tile bill

A $16-a-foot price rarely shows up as $16 a foot on the invoice. Most Bakersfield setters charge a $355–$755 minimum, so a 20 sq ft powder room floor costs the minimum, not $320. Below about 50 square feet, ask for a flat price and pair the job with something else.

Above that, the per-foot rate works, but the prep lines decide the total: demolition at $2–$7 per sq ft, leveling at $2–$6 per sq ft, backer board at $5–$8 per sq ft and, in a shower, waterproofing at $3–$8 per sq ft. Compare quotes line by line — tile, labor, prep, waterproofing, trim, haul-away — not the headline rate.

What's included in a tile quote in Bakersfield (and what costs extra)

A standard tile quote covers layout, setting the tile in thinset, grouting, cleanup and hauling away the scraps. Often left out:

  • The tile itself — $1–$4 per sq ft for budget ceramic to $6–$25 per sq ft for natural stone, plus 10–15% overage
  • Demolition and disposal — $2–$7 per sq ft, plus a $200–$800 dumpster on bigger tear-outs
  • Prep — leveling $2–$6 per sq ft, backer board $5–$8 per sq ft, waterproofing $3–$8 per sq ft
  • Trim and transitions — bullnose, metal edge profiles, a marble threshold ($30–$75), and the plumber or electrician if a toilet, vanity, valve or heating mat is involved

Ask for the price in writing before work starts, and for proof of liability insurance.

What affects tile installation costs in Bakersfield

Local wages

Federal data put the median pay for tile and stone setters in California at $58,880 a year, about 6% above the US median of $55,690. Labor is about 60% of an installed tile job, so local pay moves Bakersfield prices more than the tile does.

The tile you choose

Budget ceramic costs $1–$4 per sq ft, mid-range porcelain $3–$9 per sq ft and natural stone $6–$25 per sq ft — and stone takes longer to cut and set ($10–$22 per sq ft labor against $5–$14 per sq ft).

Size and pattern

Large-format tile needs a flatter floor and two sets of hands ($9–$16 per sq ft labor). Mosaics and feature tile run $12–$30 per sq ft. Any pattern other than a straight lay adds 10–30% in time and waste.

What's under the tile

A flat concrete slab is the cheap case. A wood subfloor needs backer board ($5–$8 per sq ft) or an uncoupling mat, an out-of-level floor needs leveling ($2–$6 per sq ft), and old tile has to come out first ($2–$7 per sq ft).

Wet rooms

Showers need a waterproof membrane ($3–$8 per sq ft), a sloped pan ($805–$3,000 tiled) and careful detailing at every corner, so wall tile in a shower costs more per foot than floor tile in a hallway.

Minimums and small jobs

Most setters charge a $355–$755 minimum. A 40 sq ft bathroom floor costs $400–$1,000 in Bakersfield — far more per foot than a 300 sq ft living room at $3,900–$9,000.

Access and the age of the house

Stairs, elevators, paid parking and nowhere to run a wet saw add hours in Downtown & Oleander. Older homes in East Bakersfield & Lakeview bring old mud-set tile, uneven floors and surprise water damage under the toilet.

How to save on tile installation in Bakersfield
  1. Pick standard-size porcelain in a straight lay.Standard 12×12 or 12×24 porcelain costs $10–$25 per sq ft installed in Bakersfield; large-format, stone and patterns each add labor and waste.
  2. Buy the tile yourself, but let the setter spec the setting materials.Mid-range porcelain is $3–$9 per sq ft at the big-box stores — order 10–15% extra for cuts. Let the installer choose thinset, grout and membrane; the wrong ones fail.
  3. Do two rooms at once.One $505 minimum and one setup covers a bathroom floor and a backsplash. Priced separately, each small job carries its own minimum.
  4. Handle the demolition yourself, carefully.Tearing out old tile costs $2–$7 per sq ft from a pro. If you do it, protect the subfloor and budget $200–$800 for a dumpster or a $4–$7-a-foot dust-free service if you'd rather not breathe it.
  5. Don't skip the prep to save money.Leveling ($2–$6 per sq ft) and waterproofing ($3–$8 per sq ft) are the cheapest lines on the quote and the first things a cheap quote drops. A failed shower pan costs far more than the membrane.
  6. Get two itemized quotes.In California, ask for the per-foot price, the prep lines, the tile allowance and the warranty in writing, and compare totals, not the headline rate.
What a tile quote in Bakersfield should include

Bakersfield tile setters quote by the square foot, by the job or both. Before you pay a deposit, get these in writing:

  • The setter's name, business name and proof of liability insurance
  • Square footage measured on site, and the per-foot or flat price
  • Who supplies the tile, how much overage is ordered, and the allowance if the setter buys it
  • Demolition, disposal and dust control — included or priced per foot
  • Floor prep: leveling, backer board or uncoupling mat, and what happens if the subfloor is rotten
  • Waterproofing method and product for any shower or wet area
  • Grout type and color, sealing, trim, thresholds and edge profiles
  • Start date, days on site, and a workmanship guarantee
Frequently asked questions — Tile installation cost in Bakersfield
How much does it cost to tile a 100 sq ft bathroom floor in Bakersfield?

$1,000–$2,500 with standard ceramic or porcelain, and $1,600 is typical — about $16 a square foot for tile, setting materials and labor. Natural stone or a pattern pushes it toward the top.

What do tile setters charge per square foot in Bakersfield?

Labor alone is $5–$14 per sq ft for standard floor tile, $9–$16 per sq ft for large-format, $8–$20 per sq ft for walls and $12–$30 per sq ft for mosaics. With standard tile and setting materials, an installed floor is $10–$25 per sq ft.

How much does it cost to tile a shower in Bakersfield?

$1,500–$5,000 for walls and floor, about 100 square feet, including a waterproof membrane. A niche or bench adds $200–$505; a new tiled pan on its own is $805–$3,000.

How much is a kitchen backsplash in Bakersfield?

About $500–$1,400 for 30 square feet of subway tile, installed. Glass or marble mosaic pushes it higher; removing an old backsplash adds $2–$7 per sq ft.

How much does tile removal cost in Bakersfield?

$2–$7 per sq ft including disposal, so $200–$700 for a 100 sq ft floor. Dust-free removal with vacuum shrouds runs $4–$7 per sq ft.

What is the hourly rate for a tile setter in Bakersfield?

$45–$110 an hour, or $360–$880 a day. Most price by the square foot instead, with a $355–$755 minimum on small jobs.

Do I need a permit or a licensed contractor for tile work in California?

In California, tile work over $1,000 (labor and materials together) needs a contractor licensed by the CSLB — the C-54 Ceramic and Mosaic Tile classification covers it — and so does any smaller job that needs a permit or a hired helper. The $1,000 line took effect January 1, 2025. Floor tile and backsplashes rarely need a permit; moving shower plumbing does. General information, not legal advice.

How long does tile installation take?

About one day for a bathroom floor or a backsplash, two to three days for a shower, and a week or more for a whole house. Thinset needs to cure before grouting, so even a small job spans two visits.

Can new tile go over old tile?

Sometimes, if the old tile is sound, flat and well bonded — it saves the $2–$7 per sq ft removal cost but raises the floor and can trap problems. Most setters prefer to tear out, especially in showers.

Should I buy the tile myself?

Usually, yes — mid-range porcelain is $3–$9 per sq ft at the big-box stores, and you skip the markup. Order 10–15% extra for cuts and let the setter choose the thinset, grout and membrane.

Prices verified November 2026 · Cross-referenced against 77+ American pricing sources · See methodology

Prices for the Bakersfield metro area, November 2026. Outer suburbs may vary.

Our methodology
These are independent estimates built from published cost guides, retailer tile and product prices, dated city cost pages, federal wage data and tile-industry trade data. No tile setter can pay to change them, so always get two or three quotes. Last reviewed November 2026. Read our full methodology →

Get a fair tile installation quote in Bakersfield

Local tile setters · Free quotes · No obligation, no spam.

Get quotes in Bakersfield →Max 2 tile setters will contact you
Get quotes in BakersfieldMax 2 tile setters · free · no spam→