How much does tile installation cost in Oxnard?
By Our research team · Last verified · Methodology
Tiling a 100 sq ft bathroom floor in Oxnard costs $985–$2,450 with $1,600 typical — about $16 a square foot with standard tile. A tiled shower runs $1,500–$4,950; a kitchen backsplash $495–$1,400.
How we get this data- Typical
- $1,600
- Low end
- $495
- High end
- $4,950
Want an exact price for your job?
Tell us the job. Casey checks it by text, then up to 2 local tile setters send you a real quote. Free, no obligation.
Get my fair quote →The typical Oxnard price is $1,600, in line with the US typical of $1,600.
Oxnard's price band
Oxnard is pricier than 56% of the 195 US metros we price for tile installation work.
Expect $985–$2,450 to tile a 100 sq ft bathroom floor in Oxnard, with $1,600 the going rate for standard tile and labor. Bigger rooms cost less per foot and tiny rooms more: most setters charge a $345–$735 minimum, so a powder room floor costs about the same as a small bathroom. A tiled shower here is $1,500–$4,950.
In Oxnard, labor sets the price. Federal wage data put the median pay for tile and stone setters in the Oxnard-Thousand Oaks-Ventura metro at $55,550 a year, close to the US median; the typical 100 sq ft floor here is $1,600, against $1,600 nationally.
In California, tile work over $1,000 (labor and materials together) needs a contractor licensed by the CSLB — the C-54 Ceramic and Mosaic Tile classification covers it — and so does any smaller job that needs a permit or a hired helper. The $1,000 line took effect January 1, 2025. Floor tile and backsplashes rarely need a permit; moving shower plumbing does. General information, not legal advice.
Comparing cities, or after the US-wide picture? See the national guide: Tile installation cost in the USA.
$985–$2,450 to tile a 100 sq ft bathroom floor in Oxnard with standard ceramic or porcelain — typically $1,600 — about $16 per square foot installed. A tiled shower runs $1,500–$4,950. Verified November 2026. Get free Oxnard quotes →
- 100 sq ft bathroom floor, standard tile: $985–$2,450 ($1,600 typical)
- Installed $10–$25 per sq ft; labor only $5–$14 per sq ft
- Tile a shower $1,500–$4,950; kitchen backsplash $495–$1,400
- Tile removal $2–$7 per sq ft; waterproofing $3–$8 per sq ft
- Hourly rate $45–$110; minimum charge $345–$735
Prices verified November 2026 · Cross-referenced against 77+ American pricing sources · See methodology
Labor and setting materials included unless the row says otherwise; tile supply rows are the tile alone. Oxnard metro, re-verified November 2026. Demolition, leveling and waterproofing are separate lines.
| Service | Low | Typical | High |
|---|---|---|---|
| Floor tile, 100 sq ft bathroom floor — standard ceramic or porcelain (tile + labor)per 100 sq ft | $985per 100 sq ft | $1,600 | $2,450 |
| Floor tile installed, standard ceramic or porcelain (tile + labor)per sq ft | $10per sq ft | $16 | $25 |
| Floor tile installation, standard 12×12 to 12×24 (labor only)per sq ft | $5per sq ft | $9 | $14 |
| Large-format floor tile, 24×24 and bigger (labor only)per sq ft | $9per sq ft | $12 | $16 |
| Wall tile, standard (labor only)per sq ft | $8per sq ft | $12 | $20 |
| Mosaic or feature tile (labor only)per sq ft | $12per sq ft | $18 | $29 |
| Natural stone tile — marble, travertine, limestone (labor only)per sq ft | $10per sq ft | $15 | $22 |
| Outdoor or patio tile, porcelain pavers on a slab (labor only)per sq ft | $7per sq ft | $12 | $20 |
| Full bathroom, 60 sq ft floor + 140 sq ft walls (labor only)per bathroom | $1,400per bathroom | $2,200 | $3,650 |
| Tile removal and disposalper sq ft | $2per sq ft | $4 | $7 |
| Waterproofing membrane, showers and wet areas (installed)per sq ft | $3per sq ft | $5 | $8 |
| Floor leveling and prep (self-leveling underlayment)per sq ft | $2per sq ft | $3 | $6 |
| Tile setter hourly rateper hour | $45per hour | $75 | $110 |
| Tile setter day rate (8 hours)per day | $360per day | $600 | $880 |
| Tile supply, budget ceramicper sq ft | $1per sq ft | $2 | $4 |
| Tile supply, mid-range porcelainper sq ft | $3per sq ft | $5 | $9 |
| Tile supply, large-format porcelain (24×24, 24×48)per sq ft | $2per sq ft | $5 | $12 |
| Tile supply, outdoor slip-resistant porcelain paversper sq ft | $4per sq ft | $8 | $15 |
| Tile supply, mosaic sheets (ceramic, porcelain, glass, stone)per sq ft | $4per sq ft | $10 | $30 |
| Tile supply, subway or backsplash ceramicper sq ft | $2per sq ft | $4 | $10 |
| Tile supply, premium natural stone (marble, travertine, limestone)per sq ft | $6per sq ft | $12 | $25 |
| Bathroom tile, 60 sq ft floor + 140 sq ft walls, mid-range porcelain (tile + labor)per bathroom | $2,200per bathroom | $3,600 | $6,050 |
| Tile a shower, walls and floor, about 100 sq ft (tile + labor)per shower | $1,500per shower | $2,650 | $4,950 |
| Kitchen backsplash, about 30 sq ft, subway tile (tile + labor)per job | $495per job | $890 | $1,400 |
Got it as a PDF or photo? Upload up to 3 quotes and compare →
Get free quotes from up to 2 local tile setters in Oxnard
Free · No obligation · About a minute
- 1The job
- 2Budget
- 3Your details
What do you want tiled?
Tap one to start.
What's your rough budget?
A ballpark is fine. It helps the tile setters who reply.
Where should they text you?
- Max 2 tile setters. No call floods.
- 100% free. No obligation.
- 🔒 Only your matched tile setters see your number.
By continuing you agree to our Terms and Privacy Policy, and to texts from LocalGoingRate and up to 2 tile setters about this request.Msg & data rates may apply · frequency varies · STOP to end · HELP for help
Check your phone
Prices verified November 2026 · Cross-referenced against 77+ American pricing sources · See methodology
Prices cover the Oxnard metro — the city and its close suburbs. Far-out towns can add a trip fee; Downtown Oxnard jobs often run higher for parking, stairs and building rules.
Tile installation prices across Oxnard
Same trade, four price bands. Rates run highest in Downtown Oxnard, older housing in Ventura brings more prep work, and Camarillo, Thousand Oaks & Simi Valley is usually the cheapest place to book.
Downtown Oxnard
- Floor tile, 100 sq ft
- $1,300–$2,250 per 100 sq ft
- Tiled shower
- $2,300–$4,200 / tiled shower
Apartments and condos where access is the cost: elevators to book, nowhere to cut tile, and debris that has to be bagged and carried out. Simple floors price normally; showers and bathrooms run at the top of the range.
Ventura
- Floor tile, 100 sq ft
- $1,200–$2,100 per 100 sq ft
- Tiled shower
- $2,150–$3,950 / tiled shower
A remodel-heavy area with older houses. Out-of-level floors, old mud-set tile and surprise rot under the toilet are common, so ask how prep is priced before work starts.
Port Hueneme & South Oxnard
- Floor tile, 100 sq ft
- $1,150–$2,050 per 100 sq ft
- Tiled shower
- $2,100–$3,800 / tiled shower
Established streets with a mix of house ages. Most jobs price at the city average; older homes may need extra time for leveling and backer board.
Camarillo, Thousand Oaks & Simi Valley
- Floor tile, 100 sq ft
- $1,150–$2,000 per 100 sq ft
- Tiled shower
- $2,050–$3,700 / tiled shower
Mostly single-family streets with easy access and a driveway to set up the saw, so rates sit near the city average.
Real-world tile installation costs in Oxnard
Here's what common tile installation jobs cost in Oxnard in 2026, standard tile, setting materials and labor included.
Small bathroom floor, 40 sq ft of porcelain
At $10–$25 per sq ft installed, 40 square feet works out to $400–$1,000, and most Oxnard setters charge a minimum of $345–$735 whatever the size — so budget $400–$1,000. Pulling the toilet and resetting it is usually included; a new wax ring and supply line are small extras.
Tile a shower, walls and floor, with waterproofing
A full tiled shower in Oxnard — about 100 square feet of wall and floor tile over a waterproof membrane — runs $1,500–$4,950. A recessed niche or bench adds $195–$490, for $1,700–$5,450 in all. If the shower valve or drain moves, a plumber's permit and bill are extra.
Kitchen backsplash, about 30 sq ft of subway tile
Expect $495–$1,400 for a standard backsplash between the counter and the upper cabinets. The tile itself is only $2–$10 per sq ft; the price is the cutting around outlets and windows. Removing an old tile backsplash first adds $2–$7 per sq ft.
Replace a kitchen floor: tear out 150 sq ft of old tile, level, lay porcelain
Removal and disposal at $4 a square foot ($300–$1,050), leveling the floor at $3 a foot and new porcelain at $16 a foot installed ($1,500–$3,750) comes to about $3,450 in Oxnard. Expect two to three days and a lot of dust — ask about dust-free removal ($4–$7 per sq ft).
Full bathroom, floor and walls, with a heated floor
Tiling a 60 sq ft floor and 140 sq ft of walls in mid-range porcelain is $2,200–$6,050. An electric heating mat under the floor adds $12 a square foot plus $140–$345 for the thermostat, about $845 for a 50 sq ft bathroom, for $2,800–$7,600 in all. The mat needs its own circuit, so an electrician's visit is extra.
How much does tile installation cost in Oxnard?
Between $985 and $2,450 for a 100 sq ft bathroom floor, with most Oxnard homeowners paying about $1,600. Labor is the bigger half: a setter charges $5–$14 per sq ft to lay standard tile, $9–$16 per sq ft for large-format and $10–$22 per sq ft for natural stone. Standard porcelain itself is only $3–$9 per sq ft.
Whole jobs are where the money goes. In Oxnard, tiling a shower is $1,500–$4,950, a kitchen backsplash $495–$1,400 and a full bathroom — floor and walls — $2,200–$6,050, checked against 77 sources in November 2026.
Lines on a tile quote in Oxnard (2026)
A 100 sq ft bathroom floor runs $985–$2,450, labor alone $5–$14 per sq ft, and most setters charge a $345–$735 minimum on small jobs.
| Line on the quote | Low | Typical | High |
|---|---|---|---|
| Floor tile, 100 sq ft bathroom floor (tile + labor) | $985 | $1,600 | $2,450 |
| Floor tile installed, per sq ft (tile + labor) | $10 | $16 | $25 |
| Floor tile labor only, per sq ft | $5 | $9 | $14 |
| Tile setter hourly rate | $45 | $75 | $110 |
| Minimum charge on small jobs | $345 | $490 | $735 |
| Tile removal and disposal, per sq ft | $2 | $4 | $7 |
| Waterproofing membrane, per sq ft | $3 | $5 | $8 |
| Floor leveling and prep, per sq ft | $2 | $3 | $6 |
Small jobs cost more per foot in Oxnard: a $490 minimum spread over a 20 sq ft powder room is $25 a square foot. Pair it with a backsplash or a second floor and the minimum stops hurting.
What moves a tile quote in Oxnard:
- The tile — budget ceramic is $1–$4 per sq ft, mid-range porcelain $3–$9 per sq ft, natural stone $6–$25 per sq ft, and stone costs more to set too.
- Tile size and pattern — large-format runs $9–$16 per sq ft in labor against $5–$14 per sq ft for standard sizes; herringbone, diagonal or mosaic adds 10–30% in time and waste.
- Prep — tearing out old tile ($2–$7 per sq ft), leveling ($2–$6 per sq ft) and backer board ($5–$8 per sq ft) are separate lines, and they decide whether the job lasts.
- Wet areas — showers need a waterproof membrane ($3–$8 per sq ft) and a sloped pan ($790–$2,950 tiled), which is why a shower costs $1,500–$4,950.
- Minimums and access — most setters charge a $345–$735 minimum; stairs, elevators and no place to set up a wet saw add time in Downtown Oxnard.
Ask every Oxnard tile setter the same four things: the per-foot or flat price, what prep and waterproofing are included, who buys the tile and setting materials, and whether they carry liability insurance. Get a quote for your tile job →
Tile installation cost in Oxnard by room size
A 40 sq ft bathroom floor is $400–$1,000 (the minimum charge sets it), a 100 sq ft bathroom floor $985–$2,450, a 150 sq ft kitchen floor $1,500–$3,750 and a 300 sq ft living area in large-format porcelain $3,900–$9,000.
Worked example: a kitchen floor in Oxnard. 150 square feet of standard porcelain at $16 a foot installed is about $2,400. Add tear-out of the old tile at $4 a foot ($600) and leveling at $3 a foot, and the job comes to about $3,450.
A whole house of tile floors — 1,500 square feet of porcelain — runs about $13,500–$33,750 in Oxnard with a 10% volume discount, while a 200 sq ft porcelain-paver patio over a slab is $2,600–$7,000.
Tile types and what each costs installed in Oxnard
| Tile type | Cost | Best for |
|---|---|---|
| Ceramic tile (basic glazed) | $8–$20 per sq ft installed | Bathroom floors and walls on a budget; easy to cut, the cheapest tile to buy and to lay |
| Porcelain tile (standard 12×12 or 12×24) | $10–$25 per sq ft installed | Kitchens, bathrooms and entries — denser and harder than ceramic, so it takes wear and water without sealing |
| Large-format porcelain (24×24, 24×48) | $13–$30 per sq ft installed | Open living areas and big showers; fewer grout lines, but the floor must be flat and the labor rate is higher |
| Natural stone (marble, travertine, limestone) | $18–$50 per sq ft installed | Statement floors and shower walls; needs sealing and a setter who works stone every week |
| Mosaic and feature tile | $18–$60 per sq ft installed | Shower floors, niches and accent strips — small pieces, slow to set, so labor per foot is the highest |
| Subway tile (ceramic backsplash and wall tile) | $12–$30 per sq ft installed | Kitchen backsplashes and tub surrounds; cheap tile, moderate labor |
| Outdoor slip-resistant porcelain pavers | $13–$35 per sq ft installed | Patios and pool decks over a concrete slab; frost-proof and textured for wet feet |
| Heated floor add-on (electric mat under the tile) | $8–$20 per sq ft added | Bathroom floors in cold climates — add $140–$345 for the thermostat hookup |
Per-square-foot rate vs what you actually pay — the Oxnard tile bill
A $16-a-foot price rarely shows up as $16 a foot on the invoice. Most Oxnard setters charge a $345–$735 minimum, so a 20 sq ft powder room floor costs the minimum, not $320. Below about 50 square feet, ask for a flat price and pair the job with something else.
Above that, the per-foot rate works, but the prep lines decide the total: demolition at $2–$7 per sq ft, leveling at $2–$6 per sq ft, backer board at $5–$8 per sq ft and, in a shower, waterproofing at $3–$8 per sq ft. Compare quotes line by line — tile, labor, prep, waterproofing, trim, haul-away — not the headline rate.
What's included in a tile quote in Oxnard (and what costs extra)
A standard tile quote covers layout, setting the tile in thinset, grouting, cleanup and hauling away the scraps. Often left out:
- The tile itself — $1–$4 per sq ft for budget ceramic to $6–$25 per sq ft for natural stone, plus 10–15% overage
- Demolition and disposal — $2–$7 per sq ft, plus a $200–$795 dumpster on bigger tear-outs
- Prep — leveling $2–$6 per sq ft, backer board $5–$8 per sq ft, waterproofing $3–$8 per sq ft
- Trim and transitions — bullnose, metal edge profiles, a marble threshold ($30–$75), and the plumber or electrician if a toilet, vanity, valve or heating mat is involved
Ask for the price in writing before work starts, and for proof of liability insurance.
Local wages
Federal data put the median pay for tile and stone setters in the Oxnard-Thousand Oaks-Ventura metro at $55,550 a year, close to the US median of $55,690. Labor is about 60% of an installed tile job, so local pay moves Oxnard prices more than the tile does.
The tile you choose
Budget ceramic costs $1–$4 per sq ft, mid-range porcelain $3–$9 per sq ft and natural stone $6–$25 per sq ft — and stone takes longer to cut and set ($10–$22 per sq ft labor against $5–$14 per sq ft).
Size and pattern
Large-format tile needs a flatter floor and two sets of hands ($9–$16 per sq ft labor). Mosaics and feature tile run $12–$29 per sq ft. Any pattern other than a straight lay adds 10–30% in time and waste.
What's under the tile
A flat concrete slab is the cheap case. A wood subfloor needs backer board ($5–$8 per sq ft) or an uncoupling mat, an out-of-level floor needs leveling ($2–$6 per sq ft), and old tile has to come out first ($2–$7 per sq ft).
Wet rooms
Showers need a waterproof membrane ($3–$8 per sq ft), a sloped pan ($790–$2,950 tiled) and careful detailing at every corner, so wall tile in a shower costs more per foot than floor tile in a hallway.
Minimums and small jobs
Most setters charge a $345–$735 minimum. A 40 sq ft bathroom floor costs $400–$1,000 in Oxnard — far more per foot than a 300 sq ft living room at $3,900–$9,000.
Access and the age of the house
Stairs, elevators, paid parking and nowhere to run a wet saw add hours in Downtown Oxnard. Older homes in Ventura bring old mud-set tile, uneven floors and surprise water damage under the toilet.
- Pick standard-size porcelain in a straight lay.Standard 12×12 or 12×24 porcelain costs $10–$25 per sq ft installed in Oxnard; large-format, stone and patterns each add labor and waste.
- Buy the tile yourself, but let the setter spec the setting materials.Mid-range porcelain is $3–$9 per sq ft at the big-box stores — order 10–15% extra for cuts. Let the installer choose thinset, grout and membrane; the wrong ones fail.
- Do two rooms at once.One $490 minimum and one setup covers a bathroom floor and a backsplash. Priced separately, each small job carries its own minimum.
- Handle the demolition yourself, carefully.Tearing out old tile costs $2–$7 per sq ft from a pro. If you do it, protect the subfloor and budget $200–$795 for a dumpster or a $4–$7-a-foot dust-free service if you'd rather not breathe it.
- Don't skip the prep to save money.Leveling ($2–$6 per sq ft) and waterproofing ($3–$8 per sq ft) are the cheapest lines on the quote and the first things a cheap quote drops. A failed shower pan costs far more than the membrane.
- Get two itemized quotes.In California, ask for the per-foot price, the prep lines, the tile allowance and the warranty in writing, and compare totals, not the headline rate.
Oxnard tile setters quote by the square foot, by the job or both. Before you pay a deposit, get these in writing:
- The setter's name, business name and proof of liability insurance
- Square footage measured on site, and the per-foot or flat price
- Who supplies the tile, how much overage is ordered, and the allowance if the setter buys it
- Demolition, disposal and dust control — included or priced per foot
- Floor prep: leveling, backer board or uncoupling mat, and what happens if the subfloor is rotten
- Waterproofing method and product for any shower or wet area
- Grout type and color, sealing, trim, thresholds and edge profiles
- Start date, days on site, and a workmanship guarantee
How much does it cost to tile a 100 sq ft bathroom floor in Oxnard?
$985–$2,450 with standard ceramic or porcelain, and $1,600 is typical — about $16 a square foot for tile, setting materials and labor. Natural stone or a pattern pushes it toward the top.
What do tile setters charge per square foot in Oxnard?
Labor alone is $5–$14 per sq ft for standard floor tile, $9–$16 per sq ft for large-format, $8–$20 per sq ft for walls and $12–$29 per sq ft for mosaics. With standard tile and setting materials, an installed floor is $10–$25 per sq ft.
How much does it cost to tile a shower in Oxnard?
$1,500–$4,950 for walls and floor, about 100 square feet, including a waterproof membrane. A niche or bench adds $195–$490; a new tiled pan on its own is $790–$2,950.
How much is a kitchen backsplash in Oxnard?
About $495–$1,400 for 30 square feet of subway tile, installed. Glass or marble mosaic pushes it higher; removing an old backsplash adds $2–$7 per sq ft.
How much does tile removal cost in Oxnard?
$2–$7 per sq ft including disposal, so $200–$700 for a 100 sq ft floor. Dust-free removal with vacuum shrouds runs $4–$7 per sq ft.
What is the hourly rate for a tile setter in Oxnard?
$45–$110 an hour, or $360–$880 a day. Most price by the square foot instead, with a $345–$735 minimum on small jobs.
Do I need a permit or a licensed contractor for tile work in California?
In California, tile work over $1,000 (labor and materials together) needs a contractor licensed by the CSLB — the C-54 Ceramic and Mosaic Tile classification covers it — and so does any smaller job that needs a permit or a hired helper. The $1,000 line took effect January 1, 2025. Floor tile and backsplashes rarely need a permit; moving shower plumbing does. General information, not legal advice.
How long does tile installation take?
About one day for a bathroom floor or a backsplash, two to three days for a shower, and a week or more for a whole house. Thinset needs to cure before grouting, so even a small job spans two visits.
Can new tile go over old tile?
Sometimes, if the old tile is sound, flat and well bonded — it saves the $2–$7 per sq ft removal cost but raises the floor and can trap problems. Most setters prefer to tear out, especially in showers.
Should I buy the tile myself?
Usually, yes — mid-range porcelain is $3–$9 per sq ft at the big-box stores, and you skip the markup. Order 10–15% extra for cuts and let the setter choose the thinset, grout and membrane.
Prices verified November 2026 · Cross-referenced against 77+ American pricing sources · See methodology
Prices for the Oxnard metro area, November 2026. Outer suburbs may vary.
Get a fair tile installation quote in Oxnard
Local tile setters · Free quotes · No obligation, no spam.